Porosimetry of MEAs Made by “Thin Film Decal” Method and Its Effect on Performance of PEFCs
Open accessThe DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Abstract
Mercury porosimetry, scanning electron microscopy, and transmission electron microscopy have been used to characterize the pore size and distribution of carbon supports, with and without catalyst loading, and the catalyst layer of membrane electrolyte assemblies (MEAs) used in polymer electrolyte fuel cell (PEFC) applications. The majority of pores for carbon powders and catalyst loaded carbon powders concentrate in a range from 24 to 84 nm (in diam) with a small number of residual pores lying outside this range. The membrane electrode assembly catalyst layer prepared from recast Nafion and carbon supported catalyst has a different pore structure, determined by the type of catalyst used, the preparation method, and the total Nation content. The catalyst layer has two distinctive pore categories with boundary of ∼17 nm in diam. The specific pore volume of both the primary (small) pores and the secondary (large) pores decreases with an increase of Nafion content. Boiling the MEA tremendously increases the pore area. The Nafion content in the catalyst layer affects the performance of MEAs over the entire current range. The optimum performance was obtained with a Nafion content of 28 wt % for a catalyst layer made by the thin film decal process. © 2004 The Electrochemical Society. All rights reserved.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Modeling and Experimental Diagnostics in Polymer Electrolyte Fuel Cells
Springer, T. E., Wilson, M. S., & Gottesfeld, S. (1993) · Journal of The Electrochemical Society · doi:10.1149/1.2221120 · Cited by 581
Passalacqua, E., Lufrano, F., Squadrito, G., Patti, A., & Giorgi, L. (2001) · Electrochimica Acta · doi:10.1016/s0013-4686(00)00679-4 · Cited by 440
Uchida, M., Fukuoka, Y., Sugawara, Y., Eda, N., & Ohta, A. (1996) · Journal of The Electrochemical Society · doi:10.1149/1.1836988 · Cited by 309
Cited by
A comprehensive review on PEM water electrolysis
Carmo, M., Fritz, D. L., Mergel, J., & Stolten, D. (2013) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2013.01.151 · Cited by 5,492
Analysis of Oxygen-Transport Diffusion Resistance in Proton-Exchange-Membrane Fuel Cells
Nonoyama, N., Okazaki, S., Weber, A. Z., Ikogi, Y., & Yoshida, T. (2011) · Journal of The Electrochemical Society · doi:10.1149/1.3546038 · Cited by 512
Durability of PEFCs at High Humidity Conditions
Xie, J., Wood, D. L., Wayne, D. M., Zawodzinski, T. A., Atanassov, P., & Borup, R. L. (2005) · Journal of The Electrochemical Society · doi:10.1149/1.1830355 · Cited by 382
Self-citationSun, S., Jaouen, F., & Dodelet, J. (2008) · Advanced Materials · doi:10.1002/adma.200800491 · Cited by 330
Water Management in Cathode Catalyst Layers of PEM Fuel Cells
Eikerling, M. (2006) · Journal of The Electrochemical Society · doi:10.1149/1.2160435 · Cited by 295
Metadata
- Authors
- Xie, J., More, K. L., Zawodzinski, T. A., & Smith, W. H.
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 2004
- Volume
- 151
- Issue
- 11
- Pages
- A1841
- ISSN
- 0013-4651 (ISSN-L)
- OpenAlex
- W2024141244
- Cited by
- 126
- References
- 3
- FWCI
- 4.58
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.