The DOI matches its Crossref record.
Improved Graphite Anode for Lithium‐Ion Batteries Chemically: Bonded Solid Electrolyte Interface and Nanochannel Formation
Open accessAbstract
The effects of mild oxidation (burning) of two synthetic graphites on the reversible and irreversible capacities, anode‐degradation rate (on cycling) in three different electrolytes and graphite‐surface topology have been studied. STM images of both modified graphites show nanochannels having an opening of a few nanometers and up to tens of nanometers. It is believed that these nanochannels are formed at the zigzag and armchair faces between two adjacent crystallites and in the vicinity of defects and impurities. Mild burn‐off was found to improve performance in cells: is increased by 10–30%, is generally decreased (for less than 6% burn‐off) and anode degradation rate is much lower. Performance improvement is attributed to the formation of SEI chemically bonded to the surface carboxylic groups at the zigzag and armchair faces, and to accommodation of extra lithium at the zigzag, armchair, and other edge sites and nanovoids.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
A review of the features and analyses of the solid electrolyte interphase in Li-ion batteries
Verma, P., Maire, P., & Novák, P. (2010) · Electrochimica Acta · doi:10.1016/j.electacta.2010.05.072 · Cited by 2,903
Review—SEI: Past, Present and Future
Peled, E., & Menkin, S. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.1441707jes · Cited by 2,182
Self-citationAn, S. J., Li, J., Daniel, C., Mohanty, D., Nagpure, S., & Wood, D. L. (2016) · Carbon · doi:10.1016/j.carbon.2016.04.008 · Cited by 2,121
A review on electrolyte additives for lithium-ion batteries
Zhang, S. S. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.07.074 · Cited by 1,831
Electrochemically Active Polymers for Rechargeable Batteries
Novák, P., Müller, K., Santhanam, K. S. V., & Haas, O. (1997) · Chemical Reviews · doi:10.1021/cr941181o · Cited by 1,618
Asenbauer, J., Eisenmann, T., Kuenzel, M., Kazzazi, A., Chen, Z., & Bresser, D. (2020) · Sustainable Energy & Fuels · doi:10.1039/d0se00175a · Cited by 1,295
Lithium Storage in Carbon Nanostructures
Kaskhedikar, N. A., & Maier, J. (2009) · Advanced Materials · doi:10.1002/adma.200901079 · Cited by 1,161
Carbon Nanosheet Frameworks Derived from Peat Moss as High Performance Sodium Ion Battery Anodes
Ding, J., Wang, H., Li, Z., Kohandehghan, A., Cui, K., Xu, Z., Zahiri, B., Tan, X., Lotfabad, E. M., Olsen, B. C., et al. (2013) · ACS Nano · doi:10.1021/nn404640c · Cited by 979
Aurbach, D., Markovsky, B., Weissman, I., Levi, E., & Ein-Eli, Y. (1999) · Electrochimica Acta · doi:10.1016/s0013-4686(99)00194-2 · Cited by 969
High-Density Sodium and Lithium Ion Battery Anodes from Banana Peels
Lotfabad, E. M., Ding, J., Cui, K., Kohandehghan, A., Kalisvaart, W. P., Hazelton, M., & Mitlin, D. (2014) · ACS Nano · doi:10.1021/nn502045y · Cited by 907
Palacín, M. R., & de Guibert, A. (2016) · Science · doi:10.1126/science.1253292 · Cited by 871
Towards a calcium-based rechargeable battery
Ponrouch, A., Frontera, C., Bardé, F., & Palacín, M. R. (2016) · Nature Materials · doi:10.1038/nmat4462 · Cited by 794
Carbon anode materials for lithium ion batteries
Wu, Y. P., Rahm, E., & Holze, R. (2003) · Journal of Power Sources · doi:10.1016/s0378-7753(02)00596-7 · Cited by 775
Carbon materials for lithium-ion rechargeable batteries
Flandrois, S., & Simon, B. (1999) · Carbon · doi:10.1016/s0008-6223(98)00290-5 · Cited by 742
EIS study on the formation of solid electrolyte interface in Li-ion battery
Zhang, S. S., Xu, K., & Jow, T. R. (2006) · Electrochimica Acta · doi:10.1016/j.electacta.2005.02.137 · Cited by 696
Electrochemical performance of graphene nanosheets as anode material for lithium-ion batteries
Guo, P., Song, H., & Chen, X. (2009) · Electrochemistry Communications · doi:10.1016/j.elecom.2009.04.036 · Cited by 669
Carbon-Based Fibers for Advanced Electrochemical Energy Storage Devices
Chen, S., Qiu, L., & Cheng, H.-M. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00466 · Cited by 555
Carbon materials for ion-intercalation involved rechargeable battery technologies
Wang, G., Yu, M., & Feng, X. (2021) · Chemical Society Reviews · doi:10.1039/d0cs00187b · Cited by 536
Exploring Anomalous Charge Storage in Anode Materials for Next-Generation Li Rechargeable Batteries
Kim, H., Choi, W., Yoon, J., Um, J. H., Lee, W., Kim, J., Cabana, J., & Yoon, W.-S. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00618 · Cited by 527
In situ analytical techniques for battery interface analysis
Tripathi, A. M., Su, W.-N., & Hwang, B. J. (2018) · Chemical Society Reviews · doi:10.1039/c7cs00180k · Cited by 488
Surface modifications of electrode materials for lithium ion batteries
Fu, L. J., Liu, H., Li, C., Wu, Y. P., Rahm, E., Holze, R., & Wu, H. Q. (2006) · Solid State Sciences · doi:10.1016/j.solidstatesciences.2005.10.019 · Cited by 450
Holey two-dimensional transition metal oxide nanosheets for efficient energy storage
Peng, L., Xiong, P., Ma, L., Yuan, Y., Zhu, Y., Chen, D., Luo, X., Lu, J., Amine, K., & Yu, G. (2017) · Nature Communications · doi:10.1038/ncomms15139 · Cited by 425
Revisiting the Roles of Natural Graphite in Ongoing Lithium‐Ion Batteries
Zhao, L., Ding, B., Qin, X., Wang, Z., Lv, W., He, Y., Yang, Q., & Kang, F. (2022) · Advanced Materials · doi:10.1002/adma.202106704 · Cited by 390
Interphases in Sodium‐Ion Batteries
Song, J., Xiao, B., Lin, Y., Xu, K., & Li, X. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201703082 · Cited by 389
Guo, B., Yu, X., Sun, X.-G., Chi, M., Qiao, Z.-A., Liu, J., Hu, Y.-S., Yang, X.-Q., Goodenough, J. B., & Dai, S. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee00508b · Cited by 366
Biomass derived carbon nanoparticle as anodes for high performance sodium and lithium ion batteries
Gaddam, R. R., Yang, D., Narayan, R., Raju, K., Kumar, N. A., & Zhao, X. S. (2016) · Nano Energy · doi:10.1016/j.nanoen.2016.05.047 · Cited by 363
Zhao, Y., Li, X., Yan, B., Li, D., Lawes, S., & Sun, X. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.10.008 · Cited by 356
Lithium Diffusion Mechanism through Solid–Electrolyte Interphase in Rechargeable Lithium Batteries
Ramasubramanian, A., Yurkiv, V., Foroozan, T., Ragone, M., Shahbazian-Yassar, R., & Mashayek, F. (2019) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.9b00436 · Cited by 340
Anionic Redox in Rechargeable Lithium Batteries
Li, B., & Xia, D. (2017) · Advanced Materials · doi:10.1002/adma.201701054 · Cited by 338
Dual-functional gum arabic binder for silicon anodes in lithium ion batteries
Ling, M., Xu, Y., Zhao, H., Gu, X., Qiu, J., Li, S., Wu, M., Song, X., Yan, C., Liu, G., et al. (2015) · Nano Energy · doi:10.1016/j.nanoen.2014.12.011 · Cited by 291
Enhanced Electrochemical Lithium Storage by Graphene Nanoribbons
Bhardwaj, T., Antic, A., Pavan, B., Barone, V., & Fahlman, B. D. (2010) · Journal of the American Chemical Society · doi:10.1021/ja106162f · Cited by 273
Recycling of graphite anodes for the next generation of lithium ion batteries
Moradi, B., & Botte, G. G. (2016) · Journal of Applied Electrochemistry · doi:10.1007/s10800-015-0914-0 · Cited by 270
Low‐Temperature Electrolyte Design for Lithium‐Ion Batteries: Prospect and Challenges
Li, Q., Liu, G., Cheng, H., Sun, Q., Zhang, J., & Ming, J. (2021) · Chemistry – A European Journal · doi:10.1002/chem.202101407 · Cited by 268
Batteries for Electric and Hybrid-Electric Vehicles
Cairns, E. J., & Albertus, P. (2010) · Annual Review of Chemical and Biomolecular Engineering · doi:10.1146/annurev-chembioeng-073009-100942 · Cited by 263
Fu, Y., Wei, Q., Zhang, G., & Sun, S. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702849 · Cited by 260
Zhang, S. S. (2007) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.09.040 · Cited by 161
Metadata
- Authors
- Peled, E., Menachem, C., Bar‐Tow, D., & Melman, A.
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 1996-01-01
- Volume
- 143
- Issue
- 1
- Pages
- L4-L7
- ISSN
- 0013-4651 (ISSN-L)
- 1945-7111
- OpenAlex
- W1537841131
- Cited by
- 471
- References
- 0
- FWCI
- 13.11
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.