Electrocatalytic Properties of Co, Pt, and Pt‐Co on Carbon for the Reduction of Oxygen in Alkaline Fuel Cells
Open accessThe DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
The effect of cobalt, platinum, and cobalt‐platinum, alloys on high surface area carbons for oxygen reduction in alkaline electrolyte was investigated. The Pt‐Co catalyst with ca. 1:3 atomic ratio was prepared by addition of solution to a mixture of methanol and a 5% surfactant in deionized water containing cobalt acetate and carbon suspension. This was followed by drying and heat‐treatment at 700 and 900°C in a flow of hydrogen and nitrogen gas mixtures. Polarization curves and kinetic parameters for Pt, Co, and Pt‐Co were conducted and compared in 6 M KOH and at 80°C. Higher activities were observed for the Pt‐Co alloy, that had been heat treated at 900°C. In addition to increased activity of this catalyst, the unalloyed base metal (Co) contributes to total performance improvement of the oxygen reduction process. Furthermore, surface, structural, and chemical characterizations of the catalysts were carried out using transmission electron microscopy, x‐ray diffraction, Brunauer, Emmett, and Teller method, and atomic absorption spectroscopy. Dissolution of cobalt from the electrodes, both from the single cobalt phase and Pt‐Co alloy catalysts, has been established. The x‐ray results demonstrated a shift to lower lattice parameters (3.618 Å) by the Pt‐Co alloys, prepared at 900°C, than the pure platinum catalyst (3.919 Å).
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Activity and Stability of Ordered and Disordered Co‐Pt Alloys for Phosphoric Acid Fuel Cells
Watanabe, M., Tsurumi, K., Mizukami, T., Nakamura, T., & Stonehart, P. (1994) · Journal of The Electrochemical Society · doi:10.1149/1.2059162 · Cited by 412
The Structure and Activity of Pt‐Co Alloys as Oxygen Reduction Electrocatalysts
Beard, B. C., & Ross, P. N. (1990) · Journal of The Electrochemical Society · doi:10.1149/1.2086223 · Cited by 309
Cited by
Fuel Cells: Principles, Types, Fuels, and Applications
Carrette, L., Friedrich, K. A., & Stimming, U. (2000) · ChemPhysChem · doi:10.1002/1439-7641(20001215)1:4<162::aid-cphc162>3.0.co;2-z · Cited by 919
Alkaline direct alcohol fuel cells
Antolini, E., & Gonzalez, E. R. (2010) · Journal of Power Sources · doi:10.1016/j.jpowsour.2009.11.145 · Cited by 898
Electrocatalysis of oxygen reduction and small alcohol oxidation in alkaline media
Spendelow, J. S., & Wieckowski, A. (2007) · Physical Chemistry Chemical Physics · doi:10.1039/b703315j · Cited by 821
Motility of Catalytic Nanoparticles through Self‐Generated Forces
Paxton, W. F., Sen, A., & Mallouk, T. E. (2005) · Chemistry – A European Journal · doi:10.1002/chem.200500167 · Cited by 441
Review of gas diffusion cathodes for alkaline fuel cells
Bidault, F., Brett, D. J. L., Middleton, P. H., & Brandon, N. P. (2009) · Journal of Power Sources · doi:10.1016/j.jpowsour.2008.10.106 · Cited by 365
Metadata
- Authors
- Kiros, Y.
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 1996-07-01
- Volume
- 143
- Issue
- 7
- Pages
- 2152-2157
- ISSN
- 0013-4651 (ISSN-L)
- 1945-7111
- OpenAlex
- W2068110891
- Cited by
- 56
- References
- 2
- FWCI
- 0.47
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Electrocatalytic Properties of Co, Pt, and Pt‐Co on Carbon for the Reduction of Oxygen in Alkaline Fuel Cells. https://app.cochat.ai/papers/10.1149/1.1836974
- The paper
- Kiros, Y. (1996). Electrocatalytic Properties of Co, Pt, and Pt‐Co on Carbon for the Reduction of Oxygen in Alkaline Fuel Cells. Journal of The Electrochemical Society. https://doi.org/10.1149/1.1836974
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.