Potential Application of Tungsten Carbides as Electrocatalysts: Synergistic Effect by Supporting Pt on C∕W(110) for the Reactions of Methanol, Water, and CO
Open accessThe DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
In this paper we report a surface science study aimed at fundamental understanding of supporting Pt on the surfaces of tungsten carbides. The reaction pathways of methanol, water, and carbon monoxide over platinum-modified surfaces are studied using temperature-programmed desorption (TPD), high-resolution electron energy loss spectroscopy (HREELS), and Auger electron spectroscopy (AES). The decomposition of methanol occurs readily on submonolayer Pt-modified surfaces. The presence of low-coverage Pt on effectively inhibits the undesirable pathway leading to production of on the unmodified surface. In addition, Pt-modified surfaces are active toward the dissociation of water. Furthermore, their surfaces display a relatively low desorption temperature for carbon monoxide at . The results on the Pt-modified surfaces are also compared to our earlier studies on the Pt-modified and PVD (physical vapor deposition) synthesized WC surfaces. Overall, the comparison of , , and surfaces confirms a synergistic effect by supporting submonolayer Pt on tungsten carbides, leading to higher activity toward the dissociation of methanol and water and a weaker bonding of carbon monoxide. Such a synergistic effect should be advantageous for the potential application of Pt-modified carbides as fuel cell electrocatalysts.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Chen, J. G. (1996) · Chemical Reviews · doi:10.1021/cr950232u · Cited by 773
Self-citation
Cited by
Noncarbon Support Materials for Polymer Electrolyte Membrane Fuel Cell Electrocatalysts
Wang, Y.-J., Wilkinson, D. P., & Zhang, J. (2011) · Chemical Reviews · doi:10.1021/cr100060r · Cited by 801
Novel catalyst support materials for PEMfuelcells: current status and future prospects
Shao, Y., Liu, J., Wang, Y., & Lin, Y. (2009) · J. Mater. Chem. · doi:10.1039/b808370c · Cited by 660
Review of non-platinum anode catalysts for DMFC and PEMFC application
Serov, A., & Kwak, C. (2009) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2009.03.030 · Cited by 289
Esposito, D. V., & Chen, J. G. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01851e · Cited by 260
Self-citationHara, Y., Minami, N., Matsumoto, H., & Itagaki, H. (2007) · Applied Catalysis A: General · doi:10.1016/j.apcata.2007.08.030 · Cited by 95
Metadata
- Authors
- Zellner, M. B., & Chen, J. G.
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 2005
- Volume
- 152
- Issue
- 8
- Pages
- A1483
- ISSN
- 0013-4651 (ISSN-L)
- OpenAlex
- W2003965894
- Cited by
- 40
- References
- 1
- FWCI
- 2.87
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.