Platinum-Iridium Alloys as Oxygen Reduction Electrocatalysts for Polymer Electrolyte Fuel Cells
Open accessThe DOI matches its Crossref record; 9 of the 9 references it cites were found in a registry or an index.
Abstract
Platinum-iridium (Pt-Ir) alloy electrocatalysts for polymer electrolyte fuel cell (PEFC) cathodes were prepared, and their physical and electrochemical properties were examined. A variety of unsupported Pt-Ir alloy catalysts was prepared in hot KOH solution, and the obtained Pt-Ir alloy catalysts were aggregates of fine particles ; the structure of the alloy was a uniform solid solution phase between Pt and Ir. Evaluation of the activity for the oxygen reduction reaction (ORR) was performed by both the rotating disk electrode (RDE) method in 0.1 M solution and determination of the specific activity during PEFC single-cell operations. The ORR kinetic analysis by the RDE showed that alloying Pt with Ir, especially with 5-20 wt % Ir, enhanced the catalytic activity for the ORR by a factor of more than 1.5 at 0.8 V vs RHE. The relationship between the specific current density and Ir content under PEFC operating conditions also showed enhanced ORR activity at 5-20 wt % Ir, which was consistent with the RDE results.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Gasteiger, H. A., Kocha, S. S., Sompalli, B., & Wagner, F. T. (2005) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2004.06.021 · Cited by 4,876
Enhancement of the Electroreduction of Oxygen on Pt Alloys with Fe, Ni, and Co
Toda, T., Igarashi, H., Uchida, H., & Watanabe, M. (1999) · Journal of The Electrochemical Society · doi:10.1149/1.1392544 · Cited by 1,336
Oxygen Reduction on Carbon-Supported Pt−Ni and Pt−Co Alloy Catalysts
Paulus, U. A., Wokaun, A., Scherer, G. G., Schmidt, T. J., Stamenkovic, V., Radmilovic, V., Markovic, N. M., & Ross, P. N. (2002) · The Journal of Physical Chemistry B · doi:10.1021/jp013442l · Cited by 954
Markovic, N., Gasteiger, H., & Ross, P. N. (1997) · Journal of The Electrochemical Society · doi:10.1149/1.1837646 · Cited by 564
Paulus, U. A., Wokaun, A., Scherer, G. G., Schmidt, T. J., Stamenkovic, V., Markovic, N. M., & Ross, P. N. (2002) · Electrochimica Acta · doi:10.1016/s0013-4686(02)00349-3 · Cited by 560
Mukerjee, S., Srinivasan, S., Soriaga, M. P., & McBreen, J. (1995) · The Journal of Physical Chemistry · doi:10.1021/j100013a032 · Cited by 439
Importance of Interatomic Spacing in Catalytic Reduction of Oxygen in Phosphoric Acid
Jalan, V., & Taylor, E. J. (1983) · Journal of The Electrochemical Society · doi:10.1149/1.2119574 · Cited by 363
Catalysis for Low Temperature Fuel Cells: PART I: THE CATHODE CHALLENGES
Ralph, T. R., & Hogarth, M. P. (2002) · Platinum Metals Review · doi:10.1595/003214002x461314 · Cited by 338
Kinetics of O 2 Reduction on a Pt Electrode Covered with a Thin Film of Solid Polymer Electrolyte
Zecevic, S. K., Wainright, J. S., Litt, M. H., Gojkovic, S. L., & Savinell, R. F. (1997) · Journal of The Electrochemical Society · doi:10.1149/1.1837946 · Cited by 209
Cited by
Platinum-Based Nanostructured Materials: Synthesis, Properties, and Applications
Chen, A., & Holt-Hindle, P. (2010) · Chemical Reviews · doi:10.1021/cr9003902 · Cited by 1,390
Nanostructured Pt-alloy electrocatalysts for PEM fuel cell oxygen reduction reaction
Bing, Y., Liu, H., Zhang, L., Ghosh, D., & Zhang, J. (2010) · Chemical Society Reviews · doi:10.1039/b912552c · Cited by 1,154
Antolini, E. (2014) · ACS Catalysis · doi:10.1021/cs4011875 · Cited by 587
Shinozaki, K., Zack, J. W., Pylypenko, S., Pivovar, B. S., & Kocha, S. S. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0551512jes · Cited by 254
Xu, W., Diesen, E., He, T., Reuter, K., & Margraf, J. T. (2024) · Journal of the American Chemical Society · doi:10.1021/jacs.3c14486 · Cited by 151
Metadata
- Authors
- Ioroi, T., & Yasuda, K.
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 2005
- Volume
- 152
- Issue
- 10
- Pages
- A1917
- ISSN
- 0013-4651 (ISSN-L)
- OpenAlex
- W2144585603
- Cited by
- 157
- References
- 9
- FWCI
- 5.99
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.