Electrochemical Synthesis of Peroxodiphosphate Using Boron-Doped Diamond Anodes
The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
Peroxodiphosphate salts are strong oxidizing agents that presently can be used as reagents in organics synthesis, cosmetic, agriculture, polluted water treatment, and also as bleaching agents in the detergent industry. They also have potential uses as persulfates substitutes. In this work, a new method for the synthesis of peroxodiphosphate, based on the use of boron-doped diamond electrodes, is described. The procedure developed is able to produce high-purity peroxodiphosphate (no reagents different from phosphate salts are used as raw materials) with a high current efficiency. The efficiencies of the process strongly depend on the pH and on the operating conditions (temperature and current density). The optimum range of pH is 12-13. Current densities over 1000 A m − 2 , and low temperatures, guarantee high current efficiencies and product conversions. The pH control is considered to be one of the more important operation constraints in the process. Great concentrations of phosphate in the raw materials increase the process efficiencies but they also seem to favor the corrosion of the electrode. Concentrations below 1 M of P O 4 3 − are recommended to avoid this problem.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Rate Constants for Reactions of Inorganic Radicals in Aqueous Solution
Neta, P., Huie, R. E., & Ross, A. B. (1988) · Journal of Physical and Chemical Reference Data · doi:10.1063/1.555808 · Cited by 3,651
Cited by
Direct And Mediated Anodic Oxidation of Organic Pollutants
Panizza, M., & Cerisola, G. (2009) · Chemical Reviews · doi:10.1021/cr9001319 · Cited by 2,346
Electrochemical Advanced Oxidation Processes: Today and Tomorrow. A Review
Sirés, I., Brillas, E., Oturan, M. A., Rodrigo, M. A., & Panizza, M. (2014) · Environmental Science and Pollution Research · doi:10.1007/s11356-014-2783-1 · Cited by 1,943
Self-citationMartínez-Huitle, C. A., Rodrigo, M. A., Sirés, I., & Scialdone, O. (2015) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00361 · Cited by 1,633
Self-citationDoped Diamond: A Compact Review on a New, Versatile Electrode Material
Kraft, A. (2007) · International Journal of Electrochemical Science · doi:10.1016/s1452-3981(23)17080-5 · Cited by 510
Cañizares, P., Paz, R., Sáez, C., & Rodrigo, M. A. (2009) · Journal of Environmental Management · doi:10.1016/j.jenvman.2007.10.010 · Cited by 422
Self-citation
Metadata
- Authors
- Cañizares, P., Larrondo, F., Lobato, J., Rodrigo, M. A., & Sáez, C.
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 2005
- Volume
- 152
- Issue
- 11
- Pages
- D191
- ISSN
- 0013-4651 (ISSN-L)
- OpenAlex
- W2034263146
- Cited by
- 119
- References
- 1
- FWCI
- 10.98
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.