The DOI matches its Crossref record.
Optimization of Porosity and Thickness of a Battery Electrode by Means of a Reaction‐Zone Model
Abstract
If electrode kinetics are fast and concentration gradients can be ignored, the reaction in a battery electrode is confined to a narrow zone, which moves through the electrode as the battery is discharged. During this process, the ohmic resistance increases, and the cutoff potential may signal the end of the discharge. It is desirable to have a matching of the capacity of the electrode (and hence its thickness) with the time t d of discharge. Assuming that there is a certain specified separator thickness and that the electrolyte of the separator is the same as that permeating the positive electrode, it is possible to obtain the optimum porosity as a compromise between the desire to have active material present and the necessity to have a conduction path through the pores of the electrode. For a system with a foil negative electrode and an open‐circuit potential which is independent of state of charge, this optimum value depends on one principal parameter T = U κ s t d / q + L S 2 , one which involves the time of discharge, the open‐circuit potential U , the conductivity κ s , and thickness L s of the separator, and the capacity q + per unit volume of solids in the positive electrode. There is one other parameter: the ratio of the cutoff potential to the open‐circuit potential. Other parameters are introduced to account for a more complex structure of the battery.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Redox flow batteries: a review
Weber, A. Z., Mench, M. M., Meyers, J. P., Ross, P. N., Gostick, J. T., & Liu, Q. (2011) · Journal of Applied Electrochemistry · doi:10.1007/s10800-011-0348-2 · Cited by 2,008
A review on the key issues of the lithium ion battery degradation among the whole life cycle
Han, X., Lu, L., Zheng, Y., Feng, X., Li, Z., Li, J., & Ouyang, M. (2019) · eTransportation · doi:10.1016/j.etran.2019.100005 · Cited by 1,745
Direct in situ measurements of Li transport in Li-ion battery negative electrodes
Harris, S. J., Timmons, A., Baker, D. R., & Monroe, C. (2010) · Chemical Physics Letters · doi:10.1016/j.cplett.2009.12.033 · Cited by 434
The use of mathematical modeling in the design of lithium/polymer battery systems
Doyle, M., & Newman, J. (1995) · Electrochimica Acta · doi:10.1016/0013-4686(95)00162-8 · Cited by 433
Self-citationThermal Modeling of Porous Insertion Electrodes
Thomas, K. E., & Newman, J. (2003) · Journal of The Electrochemical Society · doi:10.1149/1.1531194 · Cited by 356
Self-citation
Metadata
- Authors
- Newman, J.
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 1995-01-01
- Volume
- 142
- Issue
- 1
- Pages
- 97-101
- ISSN
- 0013-4651 (ISSN-L)
- 1945-7111
- OpenAlex
- W2157123342
- Cited by
- 159
- References
- 0
- FWCI
- 1.92
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Optimization of Porosity and Thickness of a Battery Electrode by Means of a Reaction‐Zone Model. https://app.cochat.ai/papers/10.1149/1.2043956
- The paper
- Newman, J. (1995). Optimization of Porosity and Thickness of a Battery Electrode by Means of a Reaction‐Zone Model. Journal of The Electrochemical Society. https://doi.org/10.1149/1.2043956
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.