Acid‐Doped Polybenzimidazoles: A New Polymer Electrolyte
The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
Polybenzimidazole films doped with phosphoric acid are being investigated as potential polymer electrolytes for use in hydrogen/air and direct methanol fuel cells. In this paper, we present experimental findings on the proton conductivity, water content, and methanol vapor permeability of this material, as well as preliminary fuel cell results. The low methanol vapor permeability of these electrolytes significantly reduces the adverse effects of methanol crossover typically observed in direct methanol polymer electrolyte membrane fuel cells.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Polybenzimidazole ͑PBI͒ membranes, being sulfonated, phosphonated, or doped with an acid, 3,4 exhibit a proton conductivity at temperatures up to 200°C.”
From Development and Characterization of Acid-Doped Polybenzimidazole/Sulfonated Polysulfone Blend Polymer Electrolytes for Fuel Cells (2001) · cites this paper as [3]
In the citing paper
“For pure PBI membranes ͑ᮀ͒, as can be seen from the figure, a doping level of around 500 mol % H 3 PO 4 can be achieved by using 9-11 M H 3 PO 4 solution at room temperature, which is in good agreement with other reports.3,6,9,12”
From Development and Characterization of Acid-Doped Polybenzimidazole/Sulfonated Polysulfone Blend Polymer Electrolytes for Fuel Cells (2001) · cites this paper as [3]
In the citing paper
“They also found that the conductivity of PBI, at the same temperature and doping level, increases with water vapor activity up to 3 ϫ 10 Ϫ2 S cm Ϫ1 at 0.2 p H 2 O /p sat .”
From Development and Characterization of Acid-Doped Polybenzimidazole/Sulfonated Polysulfone Blend Polymer Electrolytes for Fuel Cells (2001) · cites this paper as [3]
In the citing paper
“Wainright et al. 3 reported a conductivity value of 5 ϫ 10 Ϫ3 S cm Ϫ1 at 150°C in a dry atmosphere for a PBI membrane doped with 501 mol % H 3 PO 4 .”
From Development and Characterization of Acid-Doped Polybenzimidazole/Sulfonated Polysulfone Blend Polymer Electrolytes for Fuel Cells (2001) · cites this paper as [3]
Citations
Cites
Methods of Experimental Physics
Marton, L., Estermann, I., & Brown, S. C. (1960) · Physics Today · doi:10.1063/1.3056961 · Cited by 2,071
Cited by
Items 101–200 of 1,000
Özdemir, Y., Üregen, N., & Devrim, Y. (2017) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2016.04.132 · Cited by 176
PBI-based polymer electrolyte membranes fuel cells
Lobato, J., Cañizares, P., Rodrigo, M. A., & Linares, J. J. (2006) · Electrochimica Acta · doi:10.1016/j.electacta.2006.11.014 · Cited by 175
Thermal curing of PBI membranes for high temperature PEM fuel cells
Aili, D., Cleemann, L. N., Li, Q., Jensen, J. O., Christensen, E., & Bjerrum, N. J. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm14774b · Cited by 172
Shi, N., Wang, G., Wang, Q., Wang, L., Li, Q., & Yang, J. (2024) · Chemical Engineering Journal · doi:10.1016/j.cej.2024.151121 · Cited by 172
Zhu, L., Swihart, M. T., & Lin, H. (2018) · Energy & Environmental Science · doi:10.1039/c7ee02865b · Cited by 171
Hydrolytically Stable Polyimide Ionomer for Fuel Cell Applications
Asano, N., Miyatake, K., & Watanabe, M. (2004) · Chemistry of Materials · doi:10.1021/cm049550c · Cited by 169
Synthesis and Properties of Functionalized Polybenzimidazoles for High-Temperature PEMFCs
Yu, S., & Benicewicz, B. C. (2009) · Macromolecules · doi:10.1021/ma9015664 · Cited by 168
Proton-conducting composite membranes derived from sulfonated hydrocarbon and inorganic materials
Chang, J.-H., Park, J. H., Park, G.-G., Kim, C.-S., & Park, O. O. (2003) · Journal of Power Sources · doi:10.1016/s0378-7753(03)00605-0 · Cited by 167
High Molecular Weight Polybenzimidazole Membranes for High Temperature PEMFC
Yang, J. S., Cleemann, L. N., Steenberg, T., Terkelsen, C., Li, Q. F., Jensen, J. O., Hjuler, H. A., Bjerrum, N. J., & He, R. H. (2014) · Fuel Cells · doi:10.1002/fuce.201300070 · Cited by 167
High pressure electrical conductivity studies of acid doped polybenzimidazole
Fontanella, J. J., Wintersgill, M. C., Wainright, J. S., Savinell, R. F., & Litt, M. (1998) · Electrochimica Acta · doi:10.1016/s0013-4686(97)10032-9 · Cited by 165
Self-citationExperimental characterization and modeling of commercial polybenzimidazole-based MEA performance
Korsgaard, A. R., Refshauge, R., Nielsen, M. P., Bang, M., & Kær, S. K. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.06.099 · Cited by 165
Non‐Fluorinated Polymer Composite Proton Exchange Membranes for Fuel Cell Applications – A Review
Esmaeili, N., Gray, E. M., & Webb, C. J. (2019) · ChemPhysChem · doi:10.1002/cphc.201900191 · Cited by 164
Ding, J., Chuy, C., & Holdcroft, S. (2002) · Macromolecules · doi:10.1021/ma010970m · Cited by 164
Performance of the direct methanol fuel cell with radiation-grafted polymer membranes
Scott, K., Taama, W. M., & Argyropoulos, P. (2000) · Journal of Membrane Science · doi:10.1016/s0376-7388(99)00382-8 · Cited by 163
Miyatake, K., Zhou, H., & Watanabe, M. (2004) · Macromolecules · doi:10.1021/ma0495487 · Cited by 162
Ionic conductivity of proton exchange membranes
Beattie, P. D., Orfino, F. P., Basura, V. I., Zychowska, K., Ding, J., Chuy, C., Schmeisser, J., & Holdcroft, S. (2001) · Journal of Electroanalytical Chemistry · doi:10.1016/s0022-0728(01)00355-2 · Cited by 161
1 H-1,2,4-Triazole: An Effective Solvent for Proton-Conducting Electrolytes
Li, S., Zhou, Z., Zhang, Y., Liu, M., & Li, W. (2005) · Chemistry of Materials · doi:10.1021/cm0515092 · Cited by 160
New membranes based on ionic liquids for PEM fuel cells at elevated temperatures
Ye, H., Huang, J., Xu, J. J., Kodiweera, N. K. A. C., Jayakody, J. R. P., & Greenbaum, S. G. (2008) · Journal of Power Sources · doi:10.1016/j.jpowsour.2007.07.074 · Cited by 160
Proton conducting membranes based on PEG/SiO2 nanocomposites for direct methanol fuel cells
Chang, H. Y., & Lin, C. W. (2003) · Journal of Membrane Science · doi:10.1016/s0376-7388(03)00187-x · Cited by 159
Melchior, J.-P., Majer, G., & Kreuer, K.-D. (2017) · Physical Chemistry Chemical Physics · doi:10.1039/c6cp05331a · Cited by 159
Porous poly(benzimidazole) membrane for all vanadium redox flow battery
Luo, T., David, O., Gendel, Y., & Wessling, M. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.02.042 · Cited by 159
Luo, J., Jensen, A. H., Brooks, N. R., Sniekers, J., Knipper, M., Aili, D., Li, Q., Vanroy, B., Wübbenhorst, M., Yan, F., et al. (2015) · Energy & Environmental Science · doi:10.1039/c4ee02280g · Cited by 159
Thomassin, J., Kollár, J., Caldarella, G., Germain, A., Jérôme, R., & Detrembleur, C. (2007) · Journal of Membrane Science · doi:10.1016/j.memsci.2007.07.019 · Cited by 159
Study of the influence of the amount of PBI–H3PO4 in the catalytic layer of a high temperature PEMFC
Lobato, J., Cañizares, P., Rodrigo, M. A., Linares, J. J., & Pinar, F. J. (2010) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2009.11.091 · Cited by 158
Aili, D., Hansen, M. K., Pan, C., Li, Q., Christensen, E., Jensen, J. O., & Bjerrum, N. J. (2011) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2011.03.058 · Cited by 158
Mathematical model of a PEMFC using a PBI membrane
Cheddie, D., & Munroe, N. (2005) · Energy Conversion and Management · doi:10.1016/j.enconman.2005.08.002 · Cited by 158
New polymer electrolytes based on blends of sulfonated polysulfones with polybenzimidazole
Hasiotis, C., Deimede, V. A., & Kontoyannis, C. G. (2001) · Electrochimica Acta · doi:10.1016/s0013-4686(01)00437-6 · Cited by 157
Guo, Z., Xu, X., Xiang, Y., Lu, S., & Jiang, S. P. (2014) · Journal of Materials Chemistry A · doi:10.1039/c4ta04952g · Cited by 155
Escorihuela, J., Olvera‐Mancilla, J., Alexandrova, L., del Castillo, L. F., & Compañ, V. (2020) · Polymers · doi:10.3390/polym12091861 · Cited by 155
Hasiotis, C., Qingfeng, L., Deimede, V., Kallitsis, J. K., Kontoyannis, C. G., & Bjerrum, N. J. (2001) · Journal of The Electrochemical Society · doi:10.1149/1.1366621 · Cited by 154
Formic Acid Oxidation in a Polymer Electrolyte Fuel Cell: A Real‐Time Mass‐Spectrometry Study
Weber, M., Wang, J. ‐., Wasmus, S., & Savinell, R. F. (1996) · Journal of The Electrochemical Society · doi:10.1149/1.1836961 · Cited by 144
Self-citationHighly Conductive, Methanol Resistant Polyelectrolyte Multilayers
Argun, A. A., Ashcraft, J. N., & Hammond, P. T. (2008) · Advanced Materials · doi:10.1002/adma.200703205 · Cited by 153
Three dimensional modeling of high temperature PEM fuel cells
Cheddie, D., & Munroe, N. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.01.035 · Cited by 153
Poly(vinylphosphonic acid) and its derivatives
Macarie, L., & Ilia, G. (2010) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2010.04.001 · Cited by 153
Xu, H., Chen, K., Guo, X., Fang, J., & Yin, J. (2007) · Polymer · doi:10.1016/j.polymer.2007.07.029 · Cited by 152
Haque, M. A., Sulong, A. B., Loh, K. S., Majlan, E. H., Husaini, T., & Rosli, R. E. (2016) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2016.03.086 · Cited by 152
Influence of electrode structure on the performance of a direct methanol fuel cell
Wei, Z., Wang, S., Yi, B., Liu, J., Li-kang, C. H. E. N., Zhou, W., Li, W., & Xin, Q. (2002) · Journal of Power Sources · doi:10.1016/s0378-7753(01)01023-0 · Cited by 146
Analyzing microcogeneration systems based on LT-PEMFC and HT-PEMFC by energy balances
Jannelli, E., Minutillo, M., & Perna, A. (2013) · Applied Energy · doi:10.1016/j.apenergy.2013.02.067 · Cited by 145
Polymer electrolyte fuel cells based on phosphoric acid doped polybenzimidazole (PBI) membranes
Kongstein, O. E., Berning, T., Børresen, B., Seland, F., & Tunold, R. (2006) · Energy · doi:10.1016/j.energy.2006.07.009 · Cited by 145
Liu, F., Wang, S., Li, J., Tian, X., Wang, X., Chen, H., & Wang, Z. (2017) · Journal of Membrane Science · doi:10.1016/j.memsci.2017.07.026 · Cited by 144
Influence of the Teflon loading in the gas diffusion layer of PBI-based PEM fuel cells
Lobato, J., Cañizares, P., Rodrigo, M. A., Ruiz-López, C., & Linares, J. J. (2008) · Journal of Applied Electrochemistry · doi:10.1007/s10800-008-9512-8 · Cited by 144
Sousa, T., Mamlouk, M., & Scott, K. (2010) · Chemical Engineering Science · doi:10.1016/j.ces.2009.12.038 · Cited by 144
Ramaswamy, P., Matsuda, R., Kosaka, W., Akiyama, G., Jeon, H. J., & Kitagawa, S. (2013) · Chemical Communications · doi:10.1039/c3cc47980c · Cited by 143
A model for the liquid feed direct methanol fuel cell
Scott, K., Argyropoulos, P., & Sundmacher, K. (1999) · Journal of Electroanalytical Chemistry · doi:10.1016/s0022-0728(99)00359-9 · Cited by 142
Suryani, & Liu, Y. (2009) · Journal of Membrane Science · doi:10.1016/j.memsci.2009.01.045 · Cited by 141
Kaserer, S., Caldwell, K. M., Ramaker, D. E., & Roth, C. (2013) · The Journal of Physical Chemistry C · doi:10.1021/jp311924q · Cited by 139
Performance analysis of polymer electrolyte membranes for direct methanol fuel cells
Lufrano, F., Baglio, V., Staiti, P., Antonucci, V., & Aricò, A. S. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.05.180 · Cited by 139
Kim, S., Choi, S.-W., Jeon, W. S., Park, J. O., Ko, T., Chang, H., & Lee, J. (2012) · Macromolecules · doi:10.1021/ma202694p · Cited by 139
Chen, J., Wang, L., & Wang, L. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c10527 · Cited by 139
A two-phase model of an intermediate temperature PEM fuel cell
Cheddie, D., & Munroe, N. (2006) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2006.10.061 · Cited by 139
Electrochemical hydrogen pumping using a high-temperature polybenzimidazole (PBI) membrane
Perry, K. A., Eisman, G. A., & Benicewicz, B. C. (2007) · Journal of Power Sources · doi:10.1016/j.jpowsour.2007.11.059 · Cited by 139
Jang, J.-K., Kim, T., Yoon, S. J., Lee, J. Y., Lee, J., & Hong, Y. T. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta05080h · Cited by 138
Solution sulfonation of a novel polybenzimidazole
Péron, J., Ruiz, E., Jones, D. J., & Rozière, J. (2008) · Journal of Membrane Science · doi:10.1016/j.memsci.2008.01.044 · Cited by 138
Chuang, S., & Hsu, S. L. (2006) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.21555 · Cited by 137
Ion exchange resin/polystyrene sulfonate composite membranes for PEM fuel cells
Chen, S.-L., Krishnan, L., Srinivasan, S. G., Benziger, J. B., & Bocarsly, A. B. (2004) · Journal of Membrane Science · doi:10.1016/j.memsci.2004.06.037 · Cited by 137
New Polyethylene Based Anion Exchange Membranes (PE–AEMs) with High Ionic Conductivity
Zhang, M., Kim, H. K., Chalkova, E., Mark, F., Lvov, S. N., & Chung, T. C. M. (2011) · Macromolecules · doi:10.1021/ma200836d · Cited by 127
Plackett, D., Siu, A., Li, Q., Pan, C., Jensen, J. O., Fæster, S., Permyakova, A. A., & Bjerrum, N. J. (2011) · Journal of Membrane Science · doi:10.1016/j.memsci.2011.08.038 · Cited by 133
Qi, Z., & Buelte, S. J. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.06.020 · Cited by 131
Han, M., Zhang, G., Liu, Z., Wang, S., Li, M., Zhu, J., Li, H., Zhang, Y., Lew, C. M., & Na, H. (2010) · Journal of Materials Chemistry · doi:10.1039/c0jm02443k · Cited by 130
Paddison, S. J., & Elliott, J. A. (2006) · Physical Chemistry Chemical Physics · doi:10.1039/b602188c · Cited by 115
Zhai, Y., Zhang, H., Zhang, Y., & Xing, D. (2007) · Journal of Power Sources · doi:10.1016/j.jpowsour.2007.03.004 · Cited by 129
Jalani, N. H., Ramani, M., Ohlsson, K., Buelte, S. J., Pacifico, G., Pollard, R., Staudt, R., & Datta, R. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.02.094 · Cited by 127
Wang, K. Y., Weber, M. E., & Chung, T. (2022) · Journal of Materials Chemistry A · doi:10.1039/d2ta00422d · Cited by 127
Asensio, J. A., Borrós, S., & Gómez‐Romero, P. (2003) · Electrochemistry Communications · doi:10.1016/j.elecom.2003.09.007 · Cited by 127
Synthesis of Poly(2,5‐benzimidazole) for Use as a Fuel‐Cell Membrane
Kim, H., Cho, S. Y., An, S. J., Eun, Y. C., Kim, J., Yoon, H., Kweon, H.-J., & Yew, K. H. (2004) · Macromolecular Rapid Communications · doi:10.1002/marc.200300288 · Cited by 127
Dynamic Operation of HT-PEFC: In-Operando Imaging of Phosphoric Acid Profiles and (Re)distribution
Eberhardt, S. H., Toulec, M., Marone, F., Stampanoni, M., Büchi, F. N., & Schmidt, T. J. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0751503jes · Cited by 127
Durability of ABPBI‐based MEAs for High Temperature PEMFCs at Different Operating Conditions
Wannek, C., Kohnen, B., Oetjen, H. ‐., Lippert, H., & Mergel, J. (2008) · Fuel Cells · doi:10.1002/fuce.200700059 · Cited by 127
Polymer Electrolytes with High Ionic Concentration for Fuel Cells and Electrolyzers
Kim, Y. S. (2021) · ACS Applied Polymer Materials · doi:10.1021/acsapm.0c01405 · Cited by 125
He, R., Li, Q., Jensen, J. O., & Bjerrum, N. J. (2007) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.22053 · Cited by 125
Novel phosphoric acid-doped PBI-blends as membranes for high-temperature PEM fuel cells
Mack, F., Aniol, K., Ellwein, C., Kerres, J. A., & Zeis, R. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta01337b · Cited by 124
Modification of polymer electrolyte membranes for DMFCs using Pd films formed by sputtering
Yoon, S., Hwang, G.-H., Cho, W. I., Oh, I., Hong, S.-A., & Ha, H. Y. (2002) · Journal of Power Sources · doi:10.1016/s0378-7753(01)01048-5 · Cited by 124
Effect of the Hydrophobic Component on the Properties of Sulfonated Poly(arylene ether sulfone)s
Bae, B., Miyatake, K., & Watanabe, M. (2009) · Macromolecules · doi:10.1021/ma8026518 · Cited by 123
New proton exchange membranes based on poly (vinyl alcohol) for DMFCs
Xu, W., Liu, C., Xue, X., Su, Y., Lv, Y., Xing, W., & Lu, T. (2004) · Solid State Ionics · doi:10.1016/j.ssi.2004.04.009 · Cited by 121
Staiti, P., & Minutoli, M. (2001) · Journal of Power Sources · doi:10.1016/s0378-7753(00)00597-8 · Cited by 121
Organic/inorganic composite membranes based on polybenzimidazole and nano-SiO2
Pu, H., Liu, L., Chang, Z., & Yuan, J. (2009) · Electrochimica Acta · doi:10.1016/j.electacta.2009.08.011 · Cited by 120
Benzimidazole grafted polybenzimidazoles for proton exchange membrane fuel cells
Yang, J., Aili, D., Li, Q., Xu, Y., Liu, P., Che, Q., Jensen, J. O., Bjerrum, N. J., & He, R. (2013) · Polymer Chemistry · doi:10.1039/c3py00408b · Cited by 120
Bu, F., Zhang, Y., Hong, L., Zhao, W., Li, D., Li, J., Na, H., & Zhao, C. (2017) · Journal of Membrane Science · doi:10.1016/j.memsci.2017.09.072 · Cited by 120
Polymers application in proton exchange membranes for fuel cells (PEMFCs)
Walkowiak-Kulikowska, J., Wolska, J., & Koroniak, H. (2017) · Physical Sciences Reviews · doi:10.1515/psr-2017-0018 · Cited by 119
Transport Phenomena in Polymer Electrolyte Membranes
Fimrite, J., Struchtrup, H., & Djilali, N. (2005) · Journal of The Electrochemical Society · doi:10.1149/1.1952627 · Cited by 119
Degradation Study on MEA in H[sub 3]PO[sub 4]∕PBI High-Temperature PEMFC Life Test
Zhai, Y., Zhang, H., Liu, G., Hu, J., & Yi, B. (2006) · Journal of The Electrochemical Society · doi:10.1149/1.2372687 · Cited by 118
Aili, D., Hansen, M. K., Renzaho, R. F., Li, Q., Christensen, E. R., Jensen, J. O., & Bjerrum, N. J. (2013) · Journal of Membrane Science · doi:10.1016/j.memsci.2013.07.054 · Cited by 118
Chemical oxidative degradation of Polybenzimidazole in simulated environment of fuel cells
Chang, Z., Pu, H., Wan, D., Liu, L., Yuan, J., & Yang, Z. (2009) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2009.04.026 · Cited by 118
High temperature transport properties of polyphosphazene membranes for direct methanol fuel cells
Zhou, X., Weston, J., Chalkova, E., Hofmann, M. A., Ambler, C. M., Allcock, H. R., & Lvov, S. N. (2003) · Electrochimica Acta · doi:10.1016/s0013-4686(03)00201-9 · Cited by 117
Degradation of high temperature MEA with PBI-H3PO4 membrane in a life test
Modestov, A. D., Tarasevich, M. R., Filimonov, V. Y., & Zagudaeva, N. M. (2009) · Electrochimica Acta · doi:10.1016/j.electacta.2009.07.031 · Cited by 117
Jin, Y., Wang, T., Che, X., Dong, J., Liu, R., & Yang, J. (2021) · Journal of Membrane Science · doi:10.1016/j.memsci.2021.119884 · Cited by 117
Modified Nafion 117 as an Improved Polymer Electrolyte Membrane for Direct Methanol Fuel Cells
Hobson, L. J., Ozu, H., Yamaguchi, M., & Hayase, S. (2001) · Journal of The Electrochemical Society · doi:10.1149/1.1402980 · Cited by 117
Zhang, Z., Chalkova, E., Fedkin, M. V., Wang, C., Lvov, S. N., Komarneni, S., & Chung, T. C. M. (2008) · Macromolecules · doi:10.1021/ma801277m · Cited by 116
Bae, B., Miyatake, K., & Watanabe, M. (2009) · ACS Applied Materials & Interfaces · doi:10.1021/am900165w · Cited by 116
Robust polybenzimidazole (PBI) hollow fiber membranes for organic solvent nanofiltration
Tashvigh, A. A., & Chung, T. (2018) · Journal of Membrane Science · doi:10.1016/j.memsci.2018.11.048 · Cited by 115
Arylphosphonic Acid‐Functionalized Polyelectrolytes as Fuel Cell Membrane Material
Bock, T., Möhwald, H., & Mülhaupt, R. (2007) · Macromolecular Chemistry and Physics · doi:10.1002/macp.200700193 · Cited by 107
Pinar, F. J., Cañizares, P., Rodrigo, M. A., Úbeda, D., & Lobato, J. (2011) · RSC Advances · doi:10.1039/c1ra01084k · Cited by 115
Anion conducting poly(dialkyl benzimidazolium) salts
Thomas, O. D., Soo, K. J. W. Y., Peckham, T. J., Kulkarni, M. P., & Holdcroft, S. (2011) · Polymer Chemistry · doi:10.1039/c1py00142f · Cited by 115
Lv, R., Jin, S., Li, L., Wang, Q., Wang, J., Wang, J., & Yang, J. (2024) · Journal of Membrane Science · doi:10.1016/j.memsci.2024.122703 · Cited by 114
Self-citationLiao, J., Li, Q., Rudbeck, H. C., Jensen, J. O., Chromik, A., Bjerrum, N. J., Kerres, J. A., & Xing, W. (2011) · Fuel Cells · doi:10.1002/fuce.201000146 · Cited by 114
Polybenzimidazoles/Phosphoric Acid Solid Polymer Electrolytes: Mechanical and Electrical Properties
Litt, M. H., Ameri, R., Wang, Y., Savinell, R. F., & Wainwright, J. (1998) · MRS Proceedings · doi:10.1557/proc-548-313 · Cited by 114
Self-citationGas evolution and power performance in direct methanol fuel cells
Argyropoulos, P., Scott, K., & Taama, W. M. (1999) · Journal of Applied Electrochemistry · doi:10.1023/a:1003589319211 · Cited by 114
Synthesis and properties of novel sulfonated polyimides containing 1,5‐naphthylene moieties
Miyatake, K., Asano, N., & Watanabe, M. (2003) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.10988 · Cited by 114
Kallitsis, J. K., Geormezi, M., & Neophytides, S. G. (2009) · Polymer International · doi:10.1002/pi.2661 · Cited by 113
Vapor feed direct methanol fuel cells (DMFCs): A review
Mallick, R. K., Thombre, S. B., & Shrivastava, N. K. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.11.039 · Cited by 113
Sun, G., Wang, J.-T., & Savinell, R. F. (1998) · Journal of Applied Electrochemistry · doi:10.1023/a:1003413226041 · Cited by 113
Self-citation
Metadata
- Authors
- Wainright, J. S., Wang, J. ‐., Weng, D., Savinell, R. F., & Litt, M.
- Affiliations
- Case Western Reserve University (US)
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 1995-07-01
- Volume
- 142
- Issue
- 7
- Pages
- L121-L123
- ISSN
- 0013-4651 (ISSN-L)
- 1945-7111
- OpenAlex
- W2152101949
- Cited by
- 1,251
- References
- 1
- Citations by year
- 2026: 24 · 2025: 29 · 2024: 36 · 2023: 33 · 2022: 36 · 2021: 36 · 2020: 43 · 2019: 40 · 2018: 31 · 2017: 45 · 2016: 54 · 2015: 57 · 2014: 59 · 2013: 71 · 2012: 85
- FWCI
- 4.79
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- iopscience.iop.org/page/copyright (vor, 8925 d)
- iopscience.iop.org/info/page/text-and-data-mining (tdm, 8925 d)
- Locations
- Journal of The Electrochemical Society (publishedVersion)
- Funders
- Advanced Research Projects Agency
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Fuel Cells and Related Materials
- Physical Sciences › Chemical Engineering › Filtration and Separation › Membrane Separation and Gas Transport
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced Battery Materials and Technologies
- Keywords
- polybenzimidazole, phosphoric acid doping, polymer electrolytes, proton conductivity, moisture content, methanol crossover, direct methanol fuel cells, hydrogen-air fuel cells, proton exchange membrane fuel cells
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.