The DOI matches its Crossref record.
Solid‐State Redox Reactions of LiNi1 / 2Co1 / 2 O 2 ( R 3̄m ) for 4 Volt Secondary Lithium Cells
Abstract
LiNi 1 / 2 Co 1 / 2 O 2 ( R 3 ¯ m ; a = 2.84 Å , c = 14.1 Å in hexagonal setting) whose parent structure was a solid solution of LiNiO 2 and LiCoO 2 was prepared and examined in a nonaqueous lithium cell. The oxidation of LiNi 1 / 2 Co 1 / 2 O 2 and reduction of □ Ni 1 / 2 Co 1 / 2 O 2 proceeded reversibly in the voltage range above 3.5 V. X‐ray diffractional examinations indicated the reaction proceeded in a topotactic manner. During the oxidation of LiNi 1 / 2 Co 1 / 2 O 2 , the c ‐ axis dimension elongated from 14.1 to 14.5 Å and the a ‐ axis shortened from 2.84 to 2.80 Å almost linearly as a function of x in Li 1 − x Ni 1 / 2 Co 1 / 2 O 2 until x reached about 0.5. Consequently, the lattice volume remained almost invariable at 98.5 Å 3 . Further oxidation resulted in the shrinkage of the c ‐ axis dimension and the elongation of the a ‐ axis . Detained open‐circuit voltage measurements also were carried out. The open‐circuit voltages varied as a function of x in Li 1 − x Ni 1 / 2 Co 1 / 2 O 2 following a hyperbolic tangent curve, not an S‐shaped Nernstian curve. The composition‐dependent open‐circuit voltage curve together with the XRD observations indicated that the reaction proceeded in a homogeneous phase. Differences and similarities of the solid‐state redox reactions among LiNiO 2 , LiNi 1 / 2 Co 1 / 2 O 2 , and LiCoO 2 were discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Ageing mechanisms in lithium-ion batteries
Vetter, J., Novák, P., Wagner, M. R., Veit, C., Möller, K.-C., Besenhard, J. O., Winter, M., Wohlfahrt-Mehrens, M., Vogler, C., & Hammouche, A. (2005) · Journal of Power Sources · doi:10.1016/j.jpowsour.2005.01.006 · Cited by 3,987
Myung, S.-T., Maglia, F., Park, K.-J., Yoon, C. S., Lamp, P., Kim, S.-J., & Sun, Y.-K. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.6b00594 · Cited by 1,382
Automotive Li-Ion Batteries: Current Status and Future Perspectives
Ding, Y., Cano, Z. P., Yu, A., Lu, J., & Chen, Z. (2019) · Electrochemical Energy Reviews · doi:10.1007/s41918-018-0022-z · Cited by 1,370
Sustainability and in situ monitoring in battery development
Grey, C. P., & Tarascon, J. M. (2017) · Nature Materials · doi:10.1038/nmat4777 · Cited by 1,213
Nickel‐Rich and Lithium‐Rich Layered Oxide Cathodes: Progress and Perspectives
Manthiram, A., Knight, J. C., Myung, S., Oh, S., & Sun, Y. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201501010 · Cited by 1,202
An Overview on the Advances of LiCoO2 Cathodes for Lithium‐Ion Batteries
Lyu, Y., Wu, X., Wang, K., Feng, Z., Cheng, T., Liu, Y., Wang, M., Chen, R., Xu, L., Zhou, J., et al. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202000982 · Cited by 890
Novel lithium insertion material of LiCo1/3Ni1/3Mn1/3O2 for advanced lithium-ion batteries
Yabuuchi, N., & Ohzuku, T. (2003) · Journal of Power Sources · doi:10.1016/s0378-7753(03)00173-3 · Cited by 870
Self-citationCobalt in lithium-ion batteries
Li, M., & Lu, J. (2020) · Science · doi:10.1126/science.aba9168 · Cited by 532
Aging mechanisms of lithium cathode materials
Wohlfahrt-Mehrens, M., Vogler, C., & Garche, J. (2004) · Journal of Power Sources · doi:10.1016/j.jpowsour.2003.09.034 · Cited by 470
Yabuuchi, N., Makimura, Y., & Ohzuku, T. (2007) · Journal of The Electrochemical Society · doi:10.1149/1.2455585 · Cited by 387
Self-citationCharacterization and cathode performance of Li1 − xNi1 + xO2 prepared with the excess lithium method
Arai, H. (1995) · Solid State Ionics · doi:10.1016/0167-2738(95)00144-u · Cited by 365
Is Cobalt Needed in Ni-Rich Positive Electrode Materials for Lithium Ion Batteries?
Li, H., Cormier, M., Zhang, N., Inglis, J., Li, J., & Dahn, J. R. (2019) · Journal of The Electrochemical Society · doi:10.1149/2.1381902jes · Cited by 343
On the behavior of the LixNiO2 system: an electrochemical and structural overview
Delmas, C., Pérès, J. P., Rougier, A., Demourgues, A., Weill, F., Chadwick, A., Broussely, M., Perton, F., Biensan, P., & Willmann, P. (1997) · Journal of Power Sources · doi:10.1016/s0378-7753(97)02664-5 · Cited by 283
Boaretto, N., Garbayo, I., Valiyaveettil-SobhanRaj, S., Quintela, A., Li, C., Casas-Cabanas, M., & Aguesse, F. (2021) · Journal of Power Sources · doi:10.1016/j.jpowsour.2021.229919 · Cited by 271
Horiba, T. (2014) · Proceedings of the IEEE · doi:10.1109/jproc.2014.2319832 · Cited by 218
“Cobalt proved to be effective to stabilize the crystal structure in a single phase during the charge–discharge process [35], [36], and aluminum improved the thermal stability when charged and heated [37].”
Background
Metadata
- Authors
- Ueda, A., & Ohzuku, T.
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 1994-08-01
- Volume
- 141
- Issue
- 8
- Pages
- 2010-2014
- ISSN
- 0013-4651 (ISSN-L)
- 1945-7111
- OpenAlex
- W2098298489
- Cited by
- 204
- References
- 0
- FWCI
- 3.90
- Type
- journal article
- Language
- zh
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.