Surface and Catalytic Properties of Iron‐Platinum/Carbon Electrocatalysts for Cathodic Oxygen Reduction in PAFC
Open accessThe DOI matches its Crossref record.
Abstract
A Fe‐Pt bimetallic catalyst was prepared by impregnating iron nitrate solution into a carbon‐supported platinum catalyst. The catalyst was heat‐treated in flowing Ar (nontreated) at 450°C (denoted as PF450), 750°C (PF750), and 900°C (PF900), or this process was followed by an acid‐treatment in 1 M H 2 SO 4 solution to leach out surface‐enriched iron (acid‐treated). The surface and catalytic properties of these catalysts were studied using H 2 ‐ O 2 titration, XRD and TEM measurements, and oxygen reduction tests in PAFC. With increased heat‐treatment temperature, the Pt surface area measured by hydrogen chemisorption ( S CHEM ) decreases rapidly owing to particle sintering, alloying effect, and enrichment of iron on the surface. The mass activity (mA/g Pt) of the alloyed catalyst is about the same as that of pure Pt catalyst due to the particle sintering in the alloyed catalyst. However, the specific activity (mA/m 2 Pt based on S CHEM ) of the alloyed catalyst is estimated at twice that of pure Pt catalyst. The acid‐treatment leads to dissolution of surface‐enriched iron and results in an increase of the Pt surface area due to surface roughening. Except for PF450, the specific activities of both nontreated and acid‐treated catalysts are the same, indicating that S CHEM is a good measure of active site for the reaction. After acid treatment of the partially alloyed PF750, a twofold increase in the Pt surface area (therefore, twice the increase in the MA) was observed when compared with the nontreated Pt‐Fe alloy catalyst.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Aricò, A. S., Shukla, A. K., Kim, H., Park, S., Min, M., & Antonucci, V. (2001) · Applied Surface Science · doi:10.1016/s0169-4332(00)00831-x · Cited by 375
Nano-stuctured Pt–Fe/C as cathode catalyst in direct methanol fuel cell
Li, W., Zhou, W., Li, H., Zhou, Z., Zhou, B., Sun, G., & Xin, Q. (2004) · Electrochimica Acta · doi:10.1016/j.electacta.2003.10.015 · Cited by 308
Shukla, A. K., Neergat, M., Bera, P., Jayaram, V, & Hegde, M. S. (2001) · Journal of Electroanalytical Chemistry · doi:10.1016/s0022-0728(01)00421-1 · Cited by 258
Structure and Activity of Carbon-Supported Pt−Co Electrocatalysts for Oxygen Reduction
Salgado, J. R. C., Antolini, E., & Gonzalez, E. R. (2004) · The Journal of Physical Chemistry B · doi:10.1021/jp0486649 · Cited by 215
Li, W., Xin, Q., & Yan, Y. (2010) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2010.01.013 · Cited by 98
“As reported in literature [21,40], the lattice parameter of Pt and Pt3Fe alloy is 3.”
BackgroundMethodSalvatore Aricò, A., Stassi, A., Gatto, I., Monforte, G., Passalacqua, E., & Antonucci, V. (2010) · The Journal of Physical Chemistry C · doi:10.1021/jp104528q · Cited by 59
Characterization and activity correlations of Pt bimetallic catalysts for low temperature fuel cells
Sung, Y., Hwang, J., & Chung, J. S. (2011) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2010.12.058 · Cited by 26
Self-citation
Metadata
- Authors
- Kim, K. T., Hwang, J. T., Kim, Y. G., & Chung, J. S.
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 1993-01-01
- Volume
- 140
- Issue
- 1
- Pages
- 31-36
- ISSN
- 0013-4651 (ISSN-L)
- 1945-7111
- OpenAlex
- W2033087719
- Cited by
- 41
- References
- 0
- FWCI
- 2.39
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.