The Effect of Metallurgical Variables on the Electrocatalytic Properties of PtCr Alloys
Open accessThe DOI matches its Crossref record.
Abstract
In this investigation, the effect of alloying on catalysis, especially with respect to oxygen and the ORR, was examined. A series of alloys allowed four major aspects of alloying to be investigated: ( i ) effect of decreasing lattice parameter with increasing Cr content in the Pt terminal solid solution, ( ii ) effect of an order/disorder transition, ( iii ) difference between intermetallic and solid solution structures, and ( iv ) effect of dendritic segregation. Results indicated that contrary to the findings of previous investigators, decreased lattice spacing did not correlate with an increase in ORR activity. Atomic ordering in low Cr content specimens, however, was found to generally increase catalysis. Results also indicated that disordered structures interact more strongly with impurities than the ordered structures. ORR Tafel slopes, however, were unaffected by atomic ordering although additional chromium, up to at least 35 atom percent (a/o), caused a decrease in Tafel slope apparently due to oxide reduction effects. At higher Cr concentrations, catalysis decreased due to the passive nature of chromium oxide. The change in crystal structure which occurs for the 80 a/o Cr sample and the dendritic structure, had little effect on most of the electrochemical parameters studied relative simply to the additional Cr content. The results of this work also indicated that, in general, no alloy in the system is more catalytic than pure Pt. This result is in contrast to gas diffusion cell studies which have shown significant increases in catalysis due to alloying.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Recent Advances in Electrocatalysts for Oxygen Reduction Reaction
Shao, M., Chang, Q., Dodelet, J.-P., & Chenitz, R. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00462 · Cited by 3,903
Surface science studies of model fuel cell electrocatalysts
Markovic, N. (2002) · Surface Science Reports · doi:10.1016/s0167-5729(01)00022-x · Cited by 2,143
Oxygen Reduction on Carbon-Supported Pt−Ni and Pt−Co Alloy Catalysts
Paulus, U. A., Wokaun, A., Scherer, G. G., Schmidt, T. J., Stamenkovic, V., Radmilovic, V., Markovic, N. M., & Ross, P. N. (2002) · The Journal of Physical Chemistry B · doi:10.1021/jp013442l · Cited by 954
Stamenković, V., Schmidt, T. J., Ross, P. N., & Marković, N. M. (2002) · The Journal of Physical Chemistry B · doi:10.1021/jp021182h · Cited by 829
Mukerjee, S., & Srinivasan, S. (1993) · Journal of Electroanalytical Chemistry · doi:10.1016/0022-0728(93)80380-z · Cited by 646
Metadata
- Authors
- Glass, J. T., Cahen, G. L., Stoner, G. E., & Taylor, E. J.
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 1987-01-01
- Volume
- 134
- Issue
- 1
- Pages
- 58-65
- ISSN
- 0013-4651 (ISSN-L)
- 1945-7111
- OpenAlex
- W2034106457
- Cited by
- 98
- References
- 0
- FWCI
- 1.18
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: The Effect of Metallurgical Variables on the Electrocatalytic Properties of PtCr Alloys. https://app.cochat.ai/papers/10.1149/1.2100436
- The paper
- Glass, J. T., Cahen, G. L., Stoner, G. E., & Taylor, E. J. (1987). The Effect of Metallurgical Variables on the Electrocatalytic Properties of PtCr Alloys. Journal of The Electrochemical Society. https://doi.org/10.1149/1.2100436
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.