Reaction Model for Iron Dissolution Studied by Electrode Impedance: II . Determination of the Reaction Model
Open accessThe DOI matches its Crossref record.
Abstract
The electrode impedance determined experimentally shows a certain number of time constants as capacitive or inductive features. These impedances arise from various processes occurring at or near the electrode interface, such as charge transfer, adsorption‐desorption of reaction intermediate species, changes of the roughness factor, changes of the number of active sites or of volume concentration in the vicinity of the electrode, etc. The origins of impedances are examined on the basis of experimental results given in Part I . Then, hypotheses describing reaction rates, such as the Tafel law, reaction reversibility, and the adsorption isotherm law, are analyzed in order to translate reasonably the reaction models into mathematical expressions. With hypotheses retained, it is concluded that the experimental results should be interpreted by a model including three adsorbed reaction intermediate species. Forty possible reaction schemes, as the complete set of prospective models, were written and examined according to both steady‐state polarization curves and electrode impedances. The appearance of two current maxima implies at least two dissolution paths in the reaction models and allowed us to eliminate 10 of the 40 reaction schemes. On the other hand, the appearance of inductive impedance was found to constitute a very selective criterion. Only one model, given in Part I , was found to simulate suitably the whole set of experimental results.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Electrochemical Impedance Spectroscopy
(2016) · Encyclopedia of Membranes · doi:10.1007/978-3-662-44324-8_100089 · Cited by 1,580
Electrochemical impedance spectroscopy
Wang, S., Zhang, J., Gharbi, O., Vivier, V., Gao, M., & Orazem, M. E. (2021) · Nature Reviews Methods Primers · doi:10.1038/s43586-021-00039-w · Cited by 1,140
Impedance Analysis of Electrochemical Systems
Vivier, V., & Orazem, M. E. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00876 · Cited by 615
ac Impedance of Faradaic reactions involving electrosorbed intermediates—I. Kinetic theory
Harrington, D. A., & Conway, B. E. (1987) · Electrochimica Acta · doi:10.1016/0013-4686(87)80005-1 · Cited by 534
Metadata
- Authors
- Keddam, M., Mattos, O. R., & Takenouti, H.
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 1981-02-01
- Volume
- 128
- Issue
- 2
- Pages
- 266-274
- ISSN
- 0013-4651 (ISSN-L)
- 1945-7111
- OpenAlex
- W2197937925
- Cited by
- 215
- References
- 0
- FWCI
- 3.00
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.