The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Isothermal Cold Start of Polymer Electrolyte Fuel Cells
Open accessAbstract
Experimental procedures, aimed at elucidating fundamentals of polymer electrolyte fuel cell startup from subzero temperatures, are reported. A method of equilibrium purge using partially humidified gas with well-controlled relative humidity is introduced to effectively control initial water distribution inside a cell prior to cold start. Isothermal cold start, in which single cells with sufficiently large thermal mass are used to fix the cell temperature constant at the startup ambient temperature, is proposed to study intrinsic cold start capability of the membrane-electrode assembly. The proton conductivity of membranes with low water content and at subzero temperatures is measured in situ. The cumulative product water in has been used to quantify performance of isothermal cold start and is shown to exhibit a nonlinear relationship with the membrane water uptake potential, defined as the difference between the membrane hydration water content and initial value prior to cold start. It is found that the membrane is a key component to enhance the intrinsic capability of isothermal cold start from . Finally, when the current density is high, the pore volume of the cathode catalyst layer is not fully utilized for ice storage, thereby decreasing cold start performance.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Polymer Electrolyte Fuel Cell Model
Springer, T. E., Zawodzinski, T. A., & Gottesfeld, S. (1991) · Journal of The Electrochemical Society · doi:10.1149/1.2085971 · Cited by 3,528
Cited by
Water transport in polymer electrolyte membrane fuel cells
Jiao, K., & Li, X. (2011) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2010.06.002 · Cited by 1,086
A review of the main parameters influencing long-term performance and durability of PEM fuel cells
Schmittinger, W., & Vahidi, A. (2008) · Journal of Power Sources · doi:10.1016/j.jpowsour.2008.01.070 · Cited by 819
Cold start of proton exchange membrane fuel cell
Luo, Y., & Jiao, K. (2018) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2017.10.003 · Cited by 353
Jiao, K., & Li, X. (2009) · Electrochimica Acta · doi:10.1016/j.electacta.2009.06.072 · Cited by 289
A critical review of two-phase flow in gas flow channels of proton exchange membrane fuel cells
Anderson, R., Zhang, L., Ding, Y., Blanco, M., Bi, X., & Wilkinson, D. P. (2010) · Journal of Power Sources · doi:10.1016/j.jpowsour.2009.12.123 · Cited by 276
Metadata
- Authors
- Tajiri, K., Tabuchi, Y., & Wang, C.-Y.
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 2007
- Volume
- 154
- Issue
- 2
- Pages
- B147
- ISSN
- 0013-4651 (ISSN-L)
- OpenAlex
- W2127166638
- Cited by
- 191
- References
- 1
- FWCI
- 13.54
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.