Factors Influencing Electrochemical Properties and Performance of Hydrocarbon-Based Electrolyte PEMFC Catalyst Layers
The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Abstract
Cathode catalyst layers (CLs) for proton exchange membrane fuel cells (PEMFCs) incorporating sulfonated poly(ether ether ketone) (SPEEK) solid polymer electrolyte were prepared and studied in a fuel cell operated at and 100% relative humidity. SPEEK-based CLs were found to exhibit higher protonic resistance, lower effective usage of Pt, and lower fuel cell performance compared to Nafion-based cathodes. A method of fabrication was developed to achieve a homogeneous distribution of SPEEK and polytetrafluoroethylene (PTFE) throughout the catalyst layer. Homogeneously prepared SPEEK-based CLs exhibited a higher electrochemically active surface area and lower protonic resistance but lower porosity and inferior water management compared to those prepared using a traditional two-step fabrication method, wherein SPEEK ionomer was impregnated into a preformed catalyst layer incorporating sintered PTFE and . The choice of SPEEK electrolyte over Nafion was shown to adversely affect the bulk proton conductivity of the electrolyte inside the catalyst layer. This can be offset by increasing the SPEEK content in the catalyst layer but with the penalty of increased flooding and a larger resistance to gas transport.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
On the development of proton conducting polymer membranes for hydrogen and methanol fuel cells
Kreuer, K. D. (2001) · Journal of Membrane Science · doi:10.1016/s0376-7388(00)00632-3 · Cited by 2,969
Jiang, R., Kunz, H. R., & Fenton, J. M. (2005) · Journal of Power Sources · doi:10.1016/j.jpowsour.2005.03.180 · Cited by 164
Sulfonated Poly(ether ether ketone) Membranes for Direct Methanol Fuel Cells
Yang, B., & Manthiram, A. (2003) · Electrochemical and Solid-State Letters · doi:10.1149/1.1613073 · Cited by 139
Cited by
Fuel Cell Catalyst Layers: A Polymer Science Perspective
Holdcroft, S. (2014) · Chemistry of Materials · doi:10.1021/cm401445h · Cited by 481
Self-citationWang, C. R., Stansberry, J. M., Mukundan, R., Chang, H.-M. J., Kulkarni, D., Park, A. M., Plymill, A. B., Firas, N. M., Liu, C. P., Lang, J. T., et al. (2025) · Chemical Reviews · doi:10.1021/acs.chemrev.3c00904 · Cited by 402
Microstructure of Catalyst Layers in PEM Fuel Cells Redefined: A Computational Approach
Malek, K., Mashio, T., & Eikerling, M. (2011) · Electrocatalysis · doi:10.1007/s12678-011-0047-0 · Cited by 151
Nguyen, H., Klose, C., Metzler, L., Vierrath, S., & Breitwieser, M. (2022) · Advanced Energy Materials · doi:10.1002/aenm.202103559 · Cited by 133
Fuel cell catalyst layers containing short-side-chain perfluorosulfonic acid ionomers
Peron, J., Edwards, D., Haldane, M., Luo, X., Zhang, Y., Holdcroft, S., & Shi, Z. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.06.050 · Cited by 77
Self-citation
Metadata
- Authors
- Astill, T., Xie, Z., Shi, Z., Navessin, T., & Holdcroft, S.
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 2009
- Volume
- 156
- Issue
- 4
- Pages
- B499
- ISSN
- 0013-4651 (ISSN-L)
- OpenAlex
- W2102805283
- Cited by
- 54
- References
- 3
- FWCI
- 3.96
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.