Properties of Nitrogen-Functionalized Ordered Mesoporous Carbon Prepared Using Polypyrrole Precursor
The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Abstract
Nitrogen-doped ordered mesoporous carbon was synthesized using SBA-15 as the template and polypyrrole as the nitrogen-containing carbon precursor. Transmission electron microscopy and N 2 Brunauer, Emmett, and Teller adsorption revealed a honeycomb-like ordered mesoporous structure with an average pore diameter of 3.3 nm with a narrow distribution. X-ray photoelectron spectroscopy showed that pyridinic and quaternary nitrogen functionalities were the dominant nitrogen surface functional groups. A high percentage of nitrogen was retained in the carbon surface ( C / N = 8.3 ) . The prepared nitrogen-functionalized support had a specific double layer capacitance of 182.5 F/g. Also, its intrinsic oxygen reduction activity was better than that of Vulcan XC-72R. Accelerated degradation test showed that nitrogen-functionalized carbon was highly resistant to electrochemical corrosion.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Evolution of nitrogen functionalities in carbonaceous materials during pyrolysis
Pels, J. R., Kapteijn, F., Moulijn, J. A., Zhu, Q., & Thomas, K. M. (1995) · Carbon · doi:10.1016/0008-6223(95)00154-6 · Cited by 2,041
Characterization of the porous structure of sba-15
Kruk, M., Jaroniec, M., Ko, C. H., & Ryoo, R. (2000) · Chemistry of Materials · doi:10.1021/cm000164e · Cited by 1,409
Characterization of High‐Surface‐Area Electrocatalysts Using a Rotating Disk Electrode Configuration
Schmidt, T. J., Gasteiger, H. A., Stäb, G. D., Urban, P. M., Kolb, D. M., & Behm, R. J. (1998) · Journal of The Electrochemical Society · doi:10.1149/1.1838642 · Cited by 1,131
Novel catalyst support materials for PEMfuelcells: current status and future prospects
Shao, Y., Liu, J., Wang, Y., & Lin, Y. (2009) · J. Mater. Chem. · doi:10.1039/b808370c · Cited by 660
Cited by
Chen, L.-F., Zhang, X.-D., Liang, H.-W., Kong, M., Guan, Q.-F., Chen, P., Wu, Z.-Y., & Yu, S.-H. (2012) · ACS Nano · doi:10.1021/nn302147s · Cited by 1,698
N‐Doped Polypyrrole‐Based Porous Carbons for CO2 Capture
Sevilla, M., Valle‐Vigón, P., & Fuertes, A. B. (2011) · Advanced Functional Materials · doi:10.1002/adfm.201100291 · Cited by 936
Polymer-Derived Heteroatom-Doped Porous Carbon Materials
Wang, H., Shao, Y., Mei, S., Lu, Y., Zhang, M., Sun, J.-K., Matyjaszewski, K., Antonietti, M., & Yuan, J. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00080 · Cited by 876
Templated nanocarbons for energy storage
Nishihara, H., & Kyotani, T. (2012) · Advanced Materials · doi:10.1002/adma.201201715 · Cited by 745
Carbonaceous Electrode Materials for Supercapacitors
Hao, L., Li, X., & Zhi, L. (2013) · Advanced Materials · doi:10.1002/adma.201301204 · Cited by 710
Metadata
- Authors
- Shrestha, S., & Mustain, W. E.
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 2010
- Volume
- 157
- Issue
- 11
- Pages
- B1665
- ISSN
- 0013-4651 (ISSN-L)
- OpenAlex
- W2105915873
- Cited by
- 120
- References
- 4
- FWCI
- 3.98
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Properties of Nitrogen-Functionalized Ordered Mesoporous Carbon Prepared Using Polypyrrole Precursor. https://app.cochat.ai/papers/10.1149/1.3489412
- The paper
- Shrestha, S., & Mustain, W. E. (2010). Properties of Nitrogen-Functionalized Ordered Mesoporous Carbon Prepared Using Polypyrrole Precursor. Journal of The Electrochemical Society. https://doi.org/10.1149/1.3489412
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.