Physics-Based Battery Model Parametrisation from Impedance Data
Open accessThe DOI matches its Crossref record; 50 of the 52 references it cites were found in a registry or an index.
Abstract
Non-invasive parametrisation of physics-based battery models can be performed by fitting the model to electrochemical impedance spectroscopy (EIS) data containing features related to the different physical processes. However, this requires an impedance model to be derived, which may be complex to obtain analytically. We have developed the open-source software PyBaMM-EIS that provides a fast method to compute the impedance of any PyBaMM model at any operating point using automatic differentiation. Using PyBaMM-EIS, we investigate the impedance of the single particle model, single particle model with electrolyte (SPMe), and Doyle-Fuller-Newman model, and identify the SPMe as a parsimonious option that shows the typical features of measured lithium-ion cell impedance data. We provide a grouped-parameter SPMe and analyse the features in the impedance related to each parameter. Using the open-source software PyBOP, we estimate 18 grouped parameters both from simulated impedance data and from measured impedance data from a LG M50LT lithium-ion battery. The parameters that directly affect the response of the SPMe can be accurately determined and assigned to the correct electrode. Crucially, parameter fitting must be done simultaneously to measurements across a wide range of states-of-charge. Overall, this work presents a practical way to find the parameters of physics-based models.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“These capabilities make PyBaMM well-suited for studying degradation mechanisms and state estimation problems; however, direct deployment of full-fidelity models for real-time SOC estimation in battery management systems is hindered by high computational costs and sensitivity to parameter identification errors under dynamic conditions [34].”
From A Physics-Guided Transformer for Robust State of Charge Estimation in Aging Lithium-Ion Batteries (2025) · cites this paper as [34]
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
van der Vorst, H. A. (1992) · SIAM Journal on Scientific and Statistical Computing · doi:10.1137/0913035 · Cited by 5,308 · cited 1×
“The simplest approach for finding this vector is to do a direct solve of (B.10) (e.g. with LU decomposition) which appears to be more computationally e ffi cient than iterative methods (e.g. BicgSTAB [58]) for typical battery models.”
Modeling of Galvanostatic Charge and Discharge of the Lithium/Polymer/Insertion Cell
Doyle, M., Fuller, T. F., & Newman, J. (1993) · Journal of The Electrochemical Society · doi:10.1149/1.2221597 · Cited by 4,328 · cited 1×
“The standard physics-based modelling approach for lithium-ion batteries is the Doyle-Fuller-Newman (DFN) framework [6, 7], based on porous-electrode theory, consisting of a set of coupled nonlinear partial di ff erential equations that are typically too expensive to simulate in a BMS.”
The timescale identification decoupling complicated kinetic processes in lithium batteries
Lu, Y., Zhao, C.-Z., Huang, J.-Q., & Zhang, Q. (2022) · Joule · doi:10.1016/j.joule.2022.05.005 · Cited by 2,378 · cited 1×
“Impedance data allows us to distinguish between different physical processes that occur at di ff erent time-scales [51, 52], as illustrated for the grouped SPMe in Fig.”
A comparative study of equivalent circuit models for Li-ion batteries
Hu, X., Li, S., & Peng, H. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.10.013 · Cited by 2,179 · cited 1×
“Often ad hoc equivalent circuit models [1] are used to fit measured data [2, 3], but these have the disadvantage that the parameters are not always physically meaningful and simulation may be inaccurate.”
Comparison of Modeling Predictions with Experimental Data from Plastic Lithium Ion Cells
Doyle, M., Newman, J., Gozdz, A. S., Schmutz, C. N., & Tarascon, J. (1996) · Journal of The Electrochemical Society · doi:10.1149/1.1836921 · Cited by 1,569 · cited 1×
“The standard physics-based modelling approach for lithium-ion batteries is the Doyle-Fuller-Newman (DFN) framework [6, 7], based on porous-electrode theory, consisting of a set of coupled nonlinear partial di ff erential equations that are typically too expensive to simulate in a BMS.”
Electrochemical impedance spectroscopy
Wang, S., Zhang, J., Gharbi, O., Vivier, V., Gao, M., & Orazem, M. E. (2021) · Nature Reviews Methods Primers · doi:10.1038/s43586-021-00039-w · Cited by 1,140
Fisher information and stochastic complexity
Rissanen, J. J. (1996) · IEEE Transactions on Information Theory · doi:10.1109/18.481776 · Cited by 814 · cited 1×
“(A better way would be to consider the Fisher information matrix [53].)”
Ciucci, F., & Chen, C. (2015) · Electrochimica Acta · doi:10.1016/j.electacta.2015.03.123 · Cited by 678 · cited 1×
“Impedance data allows us to distinguish between different physical processes that occur at di ff erent time-scales [51, 52], as illustrated for the grouped SPMe in Fig.”
Impedance Analysis of Electrochemical Systems
Vivier, V., & Orazem, M. E. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00876 · Cited by 615 · cited 1×
“Conventional EIS measurements [18, 19, 20] consist of taking an equilibrated battery at a fixed operating point (state-of-charge (SOC) and temperature) and applying a small sinusoidal current (or voltage) at set amplitude and frequency.”
Chen, C.-H., Brosa Planella, F., O’Regan, K., Gastol, D., Widanage, W. D., & Kendrick, E. (2020) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ab9050 · Cited by 610 · cited 1×
“We consider the SPM, SPMe, and DFN models with double-layer capacitance implemented in PyBaMM (version 24.9.0 ) with the parameter set of chen2020 [45] for the LG M50 cell.”
Influential
Research works printed but not linked: 4
- [18] M. E. Orazem, B. Tribollet, Electrochemical Impedance Spectroscopy, Wiley, 2008. -
- [36] A. Aitio, S. G. Marquis, P. Ascencio, D. Howey, Bayesian parameter estimation applied to the Li-ion battery single particle model with electrolyte dynamics, IFAC-PapersOnLine 53 (2) (2020) 12497-12504. - · DOI
- [44] R. J. LeVeque, et al., Finite volume methods for hyperbolic problems, Vol. 31, Cambridge University Press, 2002. -
- [56] S. G. Marquis, Long-term degradation of lithium-ion batteries, Ph.D. thesis, University of Oxford (2020). -
Cited by
Influence of periodic temperature variations on calendar ageing of lithium-ion batteries
Fly, A., Wimarshana, B., Bin-Mat-Arishad, I., & Broad, R. N. (2025) · Journal of Power Sources · doi:10.1016/j.jpowsour.2025.238147 · Cited by 13
Zhang, Y., Xu, J., Xie, X., Huang, Q., Cheng, S., & Xie, J. (2026) · EES batteries. · doi:10.1039/d5eb00153f · Cited by 15
Chu, C. J., Thatipamula, S., & Onori, S. (2025) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ae135d · Cited by 7
Bouvet, J., Woillez, É., & Chandesris, M. (2025) · Electrochimica Acta · doi:10.1016/j.electacta.2025.146924 · Cited by 7
Pseudo-Random Sequences for Low-Cost Operando Impedance Measurements of Li-Ion Batteries
Sihvo, J., Hallemans, N., Tan, A. H., Howey, D. A., Duncan, S., & Roinila, T. (2026) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2026.3659482 · Cited by 4
“This is caused by the higher temperature during fast charging reducing the charge transfer resistance [51] but also charge transfer resistances becoming smaller at higher C-rates due to the linearization of the Butler–Volmer equation further away from zero current [6].”
InfluentialSelf-citationA Primer on Bayesian Parameter Estimation and Model Selection for Battery Simulators
Kuhn, Y., Adachi, M., Philipp, M., Howey, D. A., & Horstmann, B. (2026) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ae73f3 · Cited by 4
Self-citationGomez, M. R., Natterer, J., Fischer, M., Thielmann, J., Zonta, E., & Jossen, A. (2026) · Journal of Power Sources · doi:10.1016/j.jpowsour.2026.239526 · Cited by 4
Transport limitations in single-crystal NCM cathode electrodes
Jackowska, R., Courtier, N. E., Chen, Y., Planden, B., Howey, D. A., Lopez, C., Spathara, D., & Kendrick, E. (2025) · Journal of Power Sources · doi:10.1016/j.jpowsour.2025.238881 · Cited by 5
Self-citationNatterer, J., Gomez, M. R., Zonta, E., Thielmann, J., Rehm, M., Cronau, M., & Jossen, A. (2026) · Journal of Power Sources · doi:10.1016/j.jpowsour.2026.239896 · Cited by 3
Bernabeu-Santisteban, A., Clemente, A., Geiger, B. C., Rohrhofer, F. M., Díaz‐González, F., & Trilla, L. (2026) · Energy and AI · doi:10.1016/j.egyai.2026.100749 · Cited by 5
Xie, D., Song, T., Slater, P. R., Simmons, M. J. H., & Kendrick, E. (2026) · Journal of Power Sources · doi:10.1016/j.jpowsour.2026.240294 · Cited by 3
A Physics-Guided Transformer for Robust State of Charge Estimation in Aging Lithium-Ion Batteries
Li, X., Wu, G., Chang, F., Xia, W., Sun, S., & Shen, Y. (2025) · Batteries · doi:10.3390/batteries11120446 · Cited by 2
Chen, H., Li, Z., Ooi, K. T., & Zhang, G. (2026) · Electrochimica Acta · doi:10.1016/j.electacta.2026.149016 · Cited by 2
Battery Modeling To Enable Gradient-Based Optimization of Electrified Aircraft Mission and Design
Sebastian, A. S., Kaneko, S., Hajdik, H., Uranga, A., Martins, J. R. R. A., & Viswanathan, V. (2026) · AIAA AVIATION Forum · doi:10.2514/6.2026-4539 · Cited by 2
Düsdieker, M., Wandt, J., Li, J., Solchenbach, S., Kopp, L., Kirst, C., Goldbach, D., & Jossen, A. (2026) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ae7e5a · Cited by 2
Fly, A., Bin-Mat-Arishad, I., Wimarshana, B., & BROAD, R. (2026) · Journal of Energy Storage · doi:10.1016/j.est.2025.120314 · Cited by 1
Najjar-Giudicelli, A., Lespinats, S., Guillet, N., & Thivel, P. (2026) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ae54d2 · Cited by 2
Guenther, P., Huth, A., Nikolowski, K., Lohrberg, O., Partsch, M., Potthoff, A., & Michaelis, A. (2026) · Batteries · doi:10.3390/batteries12070261 · Cited by 1
askarzadehardestani, M. A., Niri, M. F., Essmann, S., & Schröder, D. (2025) · SSRN Electronic Journal · doi:10.2139/ssrn.5395938
Making the Case for Geometric Identifiability in Electrochemical Impedance Spectroscopy
Masoudi, Y., Alavi, S. M. M., & Azad, N. L. (2025) · IEEE Transactions on Control Systems Technology · doi:10.1109/tcst.2025.3603205
“Recently, in addition to ECM characterization, there have been e ff orts on EIS application to characterize battery physics-based models [36], [37], [38], [39], [40], [41], [42], [43], such as extended Doyle–Fuller–Newman (DFN) [41] and pseudo 2-”
Wickramanayake, T., & Mehran, K. (2026) · Communications Chemistry · doi:10.1038/s42004-026-02029-z
Altmann, F., Kuzdas, D., Murschenhofer, D., Bartlechner, J., Hametner, C., Jakubek, S., & Braun, S. (2025) · doi:10.34726/9842
Bessler, W. G., Kamlah, M., Seegert, P., Weber, A., & Wetzel, T. (2025) · Repository KITopen (Karlsruhe Institute of Technology) · doi:10.48584/opus-10318
Natterer, J., Gatzemeier, J., Zonta, E., Gomez, M. R., Oehler, F. F., Cronau, M., & Jossen, A. (2025) · Journal of Energy Storage · doi:10.1016/j.est.2025.118891 · Cited by 2
Evaluating Methods to Calculate Lithium Battery Impedance from Physics-Based PDAE Models
Sun, J.-J., Hileman, W., Trimboli, M. S., & Plett, G. L. (2025) · IEEE Conference on Decision and Control (CDC) · doi:10.1109/cdc57313.2025.11312553
“[27].”
Extending Transmission Line Models to Second-Harmonic Nonlinear Electrochemical Impedance Spectra
Ji, Y., & Schwartz, D. T. (2026) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ae4897
How to parameterise an equivalent-circuit empirical battery model from time-domain data
Blyth, M., Gupta, A., & Hales, A. (2026) · MethodsX · doi:10.1016/j.mex.2026.103865
“This enables v oc to be determined in step 2, and defines the model initial conditions for steps 3, 5, and 6.”
Gebregeorgis, T. H., Raza, K., Gaël, M., Abdelrahman, N., Zhu, X., Wouters, B., Yin, J., Drießen, C., Höschele, P., Berecibar, M., et al. (2026) · SSRN Electronic Journal · doi:10.2139/ssrn.6546465
Optimising Battery Cell Design and Production Process through Prototype Cell Finishing and Testing
Sicong, D., Miederer, L., Hoheisel, F., Gorsch, J., Friedrich, R., Wolf, S., Born, H., Heimes, H. H., & Kampker, A. (2025) · International Conference on Production Technologies and Systems for E-Mobility (EPTS) · doi:10.1109/epts67931.2025.11547759
“7 [11].”
Zonta, E., Rei, G. R., Spinola, M., Weißinger, C., Wall, W. A., & Jossen, A. (2026) · Electrochimica Acta · doi:10.1016/j.electacta.2026.149370
Urban, R., Ayo-Gieß, J., Bilfinger, P., Gamra, K. A., Balke, G., Lin, Y., Grosu, C., & Lienkamp, M. (2026) · eTransportation · doi:10.1016/j.etran.2026.100619
Identifiability-aware battery EIS parameterization with empirical risk-controlled hand-offPreprint
Zhong, H. (2026) · ChemRxiv · doi:10.26434/chemrxiv.15007286/v1
Zhong, H. (2026) · SSRN Electronic Journal · doi:10.2139/ssrn.7291018
Masoudi, Y., Alavi, S. M. M., Soudbakhsh, D., & Azad, N. L. (2026) · Automatica · doi:10.1016/j.automatica.2026.113247
Surrogate-accelerated parameterisation of physics-based Li-ion battery modelsPreprint
Gümrükçüoğlu, A. E., Pearson, J., Foster, J. M., & Burridge, J. (2026) · arXiv (Cornell University) · doi:10.48550/arxiv.2609.10341
“…on the lumped-parameter reformulation of the DFN model by Jobman et al. [20], the structural-identifiability analysis of the SPM by Bizeray et al. [21], and the recent grouped-parameter SPMe of Hallemans et al. [26], adapting these ideas to an SPMe with concentration-dependent transport functions.”
InfluentialThe Critical Role of Binder pH in Determining the Stability of Si–Gr Composite Anodes
Stokes, K., Flores, E., Truong, L. T., Glomm, W. R., Guldahl, J. C., Neidhart, L., Thøgersen, A., Nilssen, B. E., Molesworth, P. P., & Wagner, N. P. (2026) · Battery energy · doi:10.1002/bte2.70148
“The low‐frequency semicircle and low‐frequency polarisation are associated with diffusion‐related processes within the electrolyte and bulk active material [57], while the first and second semicircles correspond to the SEI and charge‐transfer resistances of the anode ( R sei and R ct ) [58].”
Measuring and modelling nonstationary impedance in Li-ion batteries
Hallemans, N., Seel-Mayer, H., Keil, P., Courtier, N. E., Duncan, S., & Howey, D. A. (2026) · IEEE Conference on Control Technology and Applications (CCTA) · doi:10.1109/ccta62090.2026.11684311
“We then solve the equations for the states, We now use these equations to study how the operando impedance of the single-particle model with electrolyte (SPMe) [20; 5] depends on rate.”
InfluentialSelf-citationKung, Y., Tien, C.-H., Chen, Y.-A., Ko, C.-J., & Chen, K.-C. (2026) · Energy storage materials · doi:10.1016/j.ensm.2026.105539
BROAD, R., Jackson, L., & Fly, A. (2026) · Journal of Energy Storage · doi:10.1016/j.est.2026.124587
Lu, J., & Qin, F. (2026) · Scientific Reports · doi:10.1038/s41598-026-65736-6
“…search (ES) parameter identification 27 , standard Adam-optimized Inception-V4 28 , particle swarm optimization (PSO)-tuned CNN 29 , physics-informed neural network with PyBOP integration 12 , Nyquist-feature-based DNN 13 , and deep reinforcement learning optimal EIS design framework 15 .”
Thranow, J.-O., Winters, F., Loechte, A., Gregor, M., Rojas, I., & Glösekötter, P. (2026) · International Conference on Time Series and Forecasting (ITISE) · doi:10.3390/engproc2026155019
Mathew, E. P., Vullum, P. E., Foppiano, D., Skogholt, A., Thøgersen, A., Svensson, A. M., & Wagner, N. P. (2026) · Batteries & Supercaps · doi:10.1002/batt.70496
A novel differential time analysis method for capacity estimation under dynamic operating conditions
Hou, J., Xu, J., Lin, C., Ma, Z., Wang, W., & Mei, X. (2026) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2026.09.054
Chen, Y., Yang, H., Han, R., Wei, H., Sun, K., Ji, Z., Guo, J., Rao, J., Zhuang, J., & Shi, F. (2026) · Electrochimica Acta · doi:10.1016/j.electacta.2026.150164
Muthmainnah, N. F., & Hindersah, H. (2026) · Electrical Power, Electronics, Communications, Controls and Informatics Seminar (EECCIS) · doi:10.1109/eeccis68982.2026.11751001
“Previous studies have demonstrated the capability of EIS-based ECMs for battery characterization under different SOC, temperature, and aging conditions [10], [11].”
Metadata
- Authors
- Hallemans, N., Courtier, N. E., Please, C. P., Planden, B., Dhoot, R., Timms, R., Chapman, S. J., Howey, D., & Duncan, S. R.
- ORCID
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 2025-06-01
- Volume
- 172
- Issue
- 6
- Pages
- 060507
- ISSN
- 0013-4651 (ISSN-L)
- 1945-7111
- OpenAlex
- W4410080786
- Cited by
- 34
- References
- 52
- Citations by year
- 2026: 23 · 2025: 11
- FWCI
- 8.28
- Type
- journal article
- Language
- en
- Open access
- hybrid
- doi.org
- Licence
- cc-by
- creativecommons.org/licenses/by/4.0/ (vor, 4 d)
- iopscience.iop.org/info/page/text-and-data-mining (tdm, 4 d)
- Locations
- Journal of The Electrochemical Society (publishedVersion, cc-by)
- arXiv (Cornell University) (submittedVersion, cc-by)
- arXiv (Cornell University) (cc-by)
- Funders
- HORIZON EUROPE Climate, Energy and Mobility (10038031)
- Faraday Institution (FIRG059)
- Topics
- Physical Sciences › Engineering › Automotive Engineering › Battery Modeling and Management
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advancements in Battery Materials
- Physical Sciences › Engineering › Control and Systems Engineering › Control Systems and Identification
- Keywords
- electrochemical impedance spectroscopy, physics-based battery model, single particle model, Doyle-Fuller-Newman model, automatic differentiation, lithium-ion batteries, impedance modeling, state of charge
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.