The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Modeling and Experimental Validation of Pt Loading and Electrode Composition Effects in PEM Fuel Cells
Open accessAbstract
A low platinum loading model, considering both the platinum loading and platinum particle distribution on carbon support, is developed. This model takes into account the interfacial transport resistances at ionomer, water film and Pt particle surfaces in order to capture the effects of Pt loading and electrode composition on fuel cell performance. After coupling this electrode model into a comprehensive PEM fuel cell model, i.e. M2 model, experimental validation is performed for a wide range of Pt loading from 0.2 to 0.025 mg/cm 2 for two electrode compositions with and without carbon dilution. Good agreement between the predicted and measured polarization curves is achieved under wide-ranging operating conditions. The agglomerate size effect is also examined and it is shown that the agglomerates have virtually no effect on cell performance for agglomerate radius smaller than 150 nm. Since in realistic fuel cell catalyst layers, agglomerates may not exist, or may only exist with sizes no larger than 150 nm based on SEM observations, the present work suggests that the standard homogeneous electrode model is suitable and sufficient for analyses of transport losses in PEM fuel cell electrodes where interfacial transport resistances exist.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Electrocatalyst approaches and challenges for automotive fuel cells
Debe, M. K. (2012) · Nature · doi:10.1038/nature11115 · Cited by 5,885
Fuel Cell Catalyst Layers: A Polymer Science Perspective
Holdcroft, S. (2014) · Chemistry of Materials · doi:10.1021/cm401445h · Cited by 481
Cited by
A review of recent development: Transport and performance modeling of PEM fuel cells
Wu, H.-W. (2016) · Applied Energy · doi:10.1016/j.apenergy.2015.12.075 · Cited by 444
Zhang, G., Qu, Z., Tao, W.-Q., Wang, X., Wu, L., Wu, S., Xie, X., Tongsh, C., Huo, W., Bao, Z., et al. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00539 · Cited by 274
Shukla, S., Bhattacharjee, S., Weber, A. Z., & Secanell, M. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.0961706jes · Cited by 137
Futter, G. A., Gazdzicki, P., Friedrich, K. A., Latz, A., & Jahnke, T. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.04.070 · Cited by 94
Influence of catalyst structure on PEM fuel cell performance – A numerical investigation
Carcadea, E., Varlam, M., Marinoiu, A., Raceanu, M., Ismail, M. S., & Ingham, D. B. (2019) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2018.12.155 · Cited by 73
Metadata
- Authors
- Hao, L., Moriyama, K., Gu, W., & Wang, C.-Y.
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 2015
- Volume
- 162
- Issue
- 8
- Pages
- F854-F867
- ISSN
- 0013-4651 (ISSN-L)
- 1945-7111
- OpenAlex
- W1612460362
- Cited by
- 178
- References
- 2
- FWCI
- 4.01
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Modeling and Experimental Validation of Pt Loading and Electrode Composition Effects in PEM Fuel Cells. https://app.cochat.ai/papers/10.1149/2.0221508jes
- The paper
- Hao, L., Moriyama, K., Gu, W., & Wang, C.-Y. (2015). Modeling and Experimental Validation of Pt Loading and Electrode Composition Effects in PEM Fuel Cells. Journal of The Electrochemical Society. https://doi.org/10.1149/2.0221508jes
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.