All Solid-State Lithium–Sulfur Battery Using a Glass-Type P2S5–Li2S Electrolyte: Benefits on Anode Kinetics

Abstract

Lithium-sulfur (Li-S) batteries are promising candidates for next generation electrical energy storage devices due to their high specific energy. Despite intense research, there are still a number of technical challenges in developing a high performance Li-S battery. To elucidate the issues, an all solid-state Li-S battery was fabricated using Li 3 PS 4 solid electrolyte. Most of the theoretical capacity of sulfur, 1600 mAhg −1 was attained in the initial discharge-charge cycles with a high coulombic efficiency approaching 99%. To verify the benefit of the solid state electrolyte, galvanostatic stripping-deposition tests were also carried out on a symmetrical Li/Li cell and compared with those of a liquid electrolyte (1 M- lithium bis(trifluoromethane sulfonyl) imide (LiTFSI) in a mixture of 1,3-dioxolane (DOL)-diethoxyethane (DEE)). The kinetics and thermodynamics of the solid-state cell are discussed from the viewpoint of the charge transfer processes. This study demonstrates both the merits and drawbacks of using the solid sulfide electrolyte in a Li-S battery and facilitates the further improvement of this important high energy storage device.