The DOI matches its Crossref record; 17 of the 17 references it cites were found in a registry or an index.
On The Corrosion and Metastable Pitting Characteristics of 316L Stainless Steel Produced by Selective Laser Melting
Open accessAbstract
The austenitic stainless steel 316L was additively manufactured using Selective Laser Melting (SLM). The corrosion characteristics of the additively manufactured (3D printed) specimens were investigated by both potentiodynamic and potentiostatic techniques. The production parameters were deliberately varied during SLM, to produce 316L specimens fabricated by different laser scan speed (in the range of 860–1160 mm/s) and laser power (in the range of 165–285 W). The fabrication parameters were found to influence the porosity of the resulting specimens. The pitting potentials, metastable pitting rates and repassivation potentials of the 3D printed specimens are presented herein as a function of the laser scan speed and laser power, and also discussed in the context of specimen porosity. The corrosion characteristics of the 3D printed 316L were also compared with wrought 316L, revealing higher pitting potentials and lower rates of metastable pitting for most SLM 316L specimens, the related concepts of which are discussed herein.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Additive manufacturing of metals
Herzog, D., Seyda, V., Wycisk, E., & Emmelmann, C. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.07.019 · Cited by 4,759
Passive films on stainless steels—chemistry, structure and growth
Olsson, C.-O. A., & Landolt, D. (2003) · Electrochimica Acta · doi:10.1016/s0013-4686(02)00841-1 · Cited by 1,398
Hardened austenite steel with columnar sub-grain structure formed by laser melting
Saeidi, K., Gao, X., Zhong, Y., & Shen, Z. J. (2015) · Materials Science and Engineering: A · doi:10.1016/j.msea.2014.12.018 · Cited by 796
Self-citationRyan, M. P., Williams, D. E., Chater, R. J., Hutton, B. M., & McPhail, D. S. (2002) · Nature · doi:10.1038/415770a · Cited by 760
Ziętala, M., Durejko, T., Polański, M., Kunce, I., Płociński, T., Zieliński, W., Łazińska, M., Stępniowski, W. J., Czujko, T., Kurzydłowski, K. J., et al. (2016) · Materials Science and Engineering A · doi:10.1016/j.msea.2016.09.028 · Cited by 523
Kamath, C., El-dasher, B., Gallegos, G. F., King, W. E., & Sisto, A. (2014) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-014-5954-9 · Cited by 395
Stewart, J., & Williams, D. E. (1992) · Corrosion Science · doi:10.1016/0010-938x(92)90074-d · Cited by 367
Sliding Wear Characteristics and Corrosion Behaviour of Selective Laser Melted 316L Stainless Steel
Sun, Y., Moroz, A., & Alrbaey, K. (2014) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-013-0784-8 · Cited by 286
Microstructure and Corrosion Resistance of Laser Additively Manufactured 316L Stainless Steel
Trelewicz, J. R., Halada, G. P., Donaldson, O. K., & Manogharan, G. P. (2016) · JOM · doi:10.1007/s11837-016-1822-4 · Cited by 274
Research on the processing experiments of laser metal deposition shaping
Zhang, K., Liu, W., & Shang, X. (2005) · Optics & Laser Technology · doi:10.1016/j.optlastec.2005.10.009 · Cited by 235
Perspective—Localized Corrosion: Passive Film Breakdown vs Pit Growth Stability
Frankel, G. S., Li, T., & Scully, J. R. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.1381704jes · Cited by 234
Density of Additively-Manufactured, 316L SS Parts Using Laser Powder-Bed Fusion at Powers Up to 400W
Lawrence Livermore National Lab. (LLNL), L., Kamath, C., USDOE, El-dasher, B., Gallegos, G., King, W. E., & Sisto, A. (2013) · doi:10.2172/1116929 · Cited by 207
Selective Laser Melting of Duplex Stainless Steel Powders: An Investigation
Davidson, K. P., & Singamneni, S. (2015) · Materials and Manufacturing Processes · doi:10.1080/10426914.2015.1090605 · Cited by 158
Rapid manufacturing: the technologies and applications of rapid prototyping and rapid tooling
Pham, D. T., & Dimov, S. (2001) · Cited by 151
Development of nickel‐titanium graded composition components
Domack, M. S., & Baughman, J. M. (2005) · Rapid Prototyping Journal · doi:10.1108/13552540510573383 · Cited by 147
Imran, M. K., Masood, S. H., Brandt, M., Bhattacharya, S., & Mazumder, J. (2011) · Materials Science and Engineering A · doi:10.1016/j.msea.2010.12.099 · Cited by 106
Stoudt, M. R., Ricker, R. E., Lass, E. A., & Levine, L. E. (2017) · JOM · doi:10.1007/s11837-016-2237-y · Cited by 97
Cited by
Steels in additive manufacturing: A review of their microstructure and properties
Bajaj, P., Hariharan, A., Kini, A., Kürnsteiner, P., Raabe, D., & Jägle, E. A. (2020) · Materials Science and Engineering: A · doi:10.1016/j.msea.2019.138633 · Cited by 1,020
Additive manufacturing of steels: a review of achievements and challenges
Haghdadi, N., Laleh, M., Moyle, M., & Primig, S. (2021) · Journal of Materials Science · doi:10.1007/s10853-020-05109-0 · Cited by 622
Heat treatment for metal additive manufacturing
Laleh, M., Sadeghi, E., Revilla, R. I., Chao, Q., Haghdadi, N., Hughes, A. E., Xu, W., De Graeve, I., Qian, M., Gibson, I., et al. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2022.101051 · Cited by 538
Defects and anomalies in powder bed fusion metal additive manufacturing
Mostafaei, A., Zhao, C., He, Y., Reza Ghiaasiaan, S., Shi, B., Shao, S., Shamsaei, N., Wu, Z., Kouraytem, N., Sun, T., et al. (2022) · Current Opinion in Solid State and Materials Science · doi:10.1016/j.cossms.2021.100974 · Cited by 491
Tucho, W. M., Lysne, V. H., Austbø, H., Sjolyst-Kverneland, A., & Hansen, V. (2018) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2018.01.098 · Cited by 482
Metadata
- Authors
- Sander, G., Thomas, S., Cruz, V., Jurg, M., Birbilis, N., Gao, X., Brameld, M., & Hutchinson, C. R.
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 2017
- Volume
- 164
- Issue
- 6
- Pages
- C250-C257
- ISSN
- 0013-4651 (ISSN-L)
- 1945-7111
- OpenAlex
- W2598599598
- Cited by
- 398
- References
- 17
- FWCI
- 16.91
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.