Fabrication, In-Situ Performance, and Durability of Nanofiber Fuel Cell Electrodes
Open accessThe DOI matches its Crossref record.
Abstract
A series of electrospun nanofiber mat electrodes with two different commercial Pt/C catalysts and a binder of Nafion and poly(acrylic acid) were fabricated and evaluated. The electrodes were assembled into membrane-electrode-assemblies (MEAs) using Nafion 211 as the membrane. Variations in catalyst type, nanofiber composition (the ratio of Pt/C to Nafion), and fiber diameter had little or no impact on hydrogen/air fuel cell power output. 25 cm 2 nanofiber and sprayed gas diffusion electrode MEAs were compared in terms of beginning of life (BoL) and end of life (EoL) performance after automotive-specific load cycling (Pt dissolution) and start-stop cycling (carbon corrosion) cathode durability protocols. Nanofiber electrode MEAs (0.10 mg/cm 2 Pt loading for the anode and cathode) were clearly superior to sprayed MEAs; they produced more power at BoL and maintained a higher percentage of their power after the carbon corrosion durability protocol, resulting in much higher EoL fuel cell performance. On the other hand, there was no effect of electrode morphology on MEA durability for the Pt dissolution test. The higher MEA power output after carbon corrosion with electrospun electrodes is attributed to better oxygen and water transport within the nanofiber electrode and a higher electrochemical surface area for the fiber cathode.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Ink solvent dependence of the ionomer distribution in the catalyst layer of a PEMFC
Orfanidi, A., Rheinländer, P. J., Schulte, N., & Gasteiger, H. A. (2018) · Journal of The Electrochemical Society · doi:10.1149/2.1251814jes · Cited by 169
Wang, G., Zou, L., Huang, Q., Zou, Z., & Yang, H. (2019) · Journal of Materials Chemistry A · doi:10.1039/c8ta12382a · Cited by 81
A highly durable fuel cell electrocatalyst based on double-polymer-coated carbon nanotubes
Berber, M. R., Hafez, I. H., Fujigaya, T., & Nakashima, N. (2015) · Scientific Reports · doi:10.1038/srep16711 · Cited by 55
Takahashi, K., Kakinuma, K., & Uchida, M. (2016) · Journal of The Electrochemical Society · doi:10.1149/2.0611610jes · Cited by 34
Metadata
- Authors
- Brodt, M., Han, T., Dale, N., Niangar, E., Wycisk, R., & Pintauro, P.
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 2014-11-18
- Volume
- 162
- Issue
- 1
- Pages
- F84-F91
- ISSN
- 0013-4651 (ISSN-L)
- 1945-7111
- OpenAlex
- W1991205601
- Cited by
- 66
- References
- 0
- FWCI
- 3.01
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Fabrication, In-Situ Performance, and Durability of Nanofiber Fuel Cell Electrodes. https://app.cochat.ai/papers/10.1149/2.0651501jes
- The paper
- Brodt, M., Han, T., Dale, N., Niangar, E., Wycisk, R., & Pintauro, P. (2015). Fabrication, In-Situ Performance, and Durability of Nanofiber Fuel Cell Electrodes. Journal of The Electrochemical Society. https://doi.org/10.1149/2.0651501jes
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.