The DOI matches its Crossref record.
The Impact of Electrolyte Additives and Upper Cut-off Voltage on the Formation of a Rocksalt Surface Layer in LiNi0.8Mn0.1Co0.1O2Electrodes
Open accessAbstract
Many literature reports show that layered Li-Ni-Mn-Co oxides (NMC) have a surface reconstruction to a rocksalt (Fm3m) structure which is claimed to be responsible for the increase in cell impedance during high voltage cycling. It is important to determine if appropriate electrolyte additives can suppress the surface reconstructions of NMC materials. LiNi 0.8 Mn 0.1 Co 0.1 O 2 (NMC811)/Graphite pouch cells with different electrolyte additives and different upper cutoff potentials were charge-discharge cycled and the electrodes were recovered for z-contrast scanning transmission electron microscope (STEM) studies. It was found that there was no significant surface layer growth for cells cycled between 2.8 and 4.1 V. For cells with an upper cutoff voltage of 4.3 V, the electrodes from cells with control electrolyte (no additives) showed the thickest surface layer. The electrolyte additives vinylene carbonate (VC) and prop-1-ene-1,3-sultone (PES) were found to suppress the growth of the surface layer. However, cells with PES showed a more rapid capacity fade than control cells or cells with 2% VC showing that, at least for NMC811/graphite cells with PES or VC additives, failure cannot only be solely ascribed to a growing rocksalt surface layer. Other processes, for example associated with electrolyte oxidation, are believed to be responsible for failure.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Non-flammable electrolyte enables Li-metal batteries with aggressive cathode chemistries
Fan, X., Chen, L., Borodin, O., Ji, X., Chen, J., Hou, S., Deng, T., Zheng, J., Yang, C., Liou, S.-C., et al. (2018) · Nature Nanotechnology · doi:10.1038/s41565-018-0183-2 · Cited by 1,371
High-voltage liquid electrolytes for Li batteries: progress and perspectives
Fan, X., & Wang, C. (2021) · Chemical Society Reviews · doi:10.1039/d1cs00450f · Cited by 980
Zhang, Y., Katayama, Y., Tatara, R., Giordano, L., Yu, Y., Fraggedakis, D., Sun, J. G., Maglia, F., Jung, R., Bazant, M. Z., et al. (2020) · Energy & Environmental Science · doi:10.1039/c9ee02543j · Cited by 452
Tan, S., Shadike, Z., Li, J., Wang, X., Yang, Y., Lin, R., Cresce, A., Hu, J., Hunt, A., Waluyo, I., et al. (2022) · Nature Energy · doi:10.1038/s41560-022-01020-x · Cited by 414
Self-citationMaleki Kheimeh Sari, H., & Li, X. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201901597 · Cited by 403
Metadata
- Authors
- Li, J., Liu, H., Xia, J., Cameron, A. R., Nie, M., Botton, G. A., & Dahn, J. R.
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 2017
- Volume
- 164
- Issue
- 4
- Pages
- A655-A665
- ISSN
- 0013-4651 (ISSN-L)
- 1945-7111
- OpenAlex
- W2584837988
- Cited by
- 200
- References
- 0
- FWCI
- 8.73
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: The Impact of Electrolyte Additives and Upper Cut-off Voltage on the Formation of a Rocksalt Surface Layer in LiNi0.8Mn0.1Co0.1O2Electrodes. https://app.cochat.ai/papers/10.1149/2.0651704jes
- The paper
- Li, J., Liu, H., Xia, J., Cameron, A. R., Nie, M., Botton, G. A., & Dahn, J. R. (2017). The Impact of Electrolyte Additives and Upper Cut-off Voltage on the Formation of a Rocksalt Surface Layer in LiNi0.8Mn0.1Co0.1O2Electrodes. Journal of The Electrochemical Society. https://doi.org/10.1149/2.0651704jes
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.