The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Initial Performance and Durability of Ultra-Low Loaded NSTF Electrodes for PEM Electrolyzers
Open accessAbstract
Water based electrolyzers offer a promising approach for generating hydrogen gas for renewable energy storage. 3M's nanostructured thin film (NSTF) catalyst technology platform has been shown to significantly reduce many of the performance, cost and durability barriers standing in the way of H 2 /air PEM fuel cells for vehicles. In this paper we describe results from the first evaluations of low loaded NSTF catalysts in H 2 /O 2 electrolyzers at Proton OnSite and Giner, Inc. Over two dozen membrane electrode assemblies comprising nine different NSTF catalyst types were tested in 11 short stack durability tests at Proton OnSite and 14 performance tests in 50 cm 2 single cells at Giner Electrochemical Systems. NSTF catalyst alloys of Pt 68 Co 29 Mn 3 , Pt 50 Ir 50 and Pt 50 Ir 25 Ru 25 , with Pt loadings in the range of 0.1 to 0.2 mg/cm 2 , were investigated for beginning-of-life performance and durability up to 4000 hours as both electrolyzer cathodes and anodes. Catalyst composition, deposition and process conditions were found to be important for meeting the performance of standard PGM blacks on electrolyzer anodes while using only 10% as much PGM catalyst. Analyses of MEA's after the durability tests by multiple techniques document changes in catalyst alloy composition, loading, crystallite structure and support stability.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Platinum-alloy nanostructured thin film catalysts for the oxygen reduction reaction
van der Vliet, D., Wang, C., Debe, M., Atanasoski, R., Markovic, N. M., & Stamenkovic, V. R. (2011) · Electrochimica Acta · doi:10.1016/j.electacta.2011.07.063 · Cited by 111
Self-citation
Cited by
A comprehensive review on PEM water electrolysis
Carmo, M., Fritz, D. L., Mergel, J., & Stolten, D. (2013) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2013.01.151 · Cited by 5,492
Anion-Exchange Membrane Water Electrolyzers
Du, N., Roy, C., Peach, R., Turnbull, M., Thiele, S., & Bock, C. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00854 · Cited by 1,075
Spöri, C., Kwan, J. T. H., Bonakdarpour, A., Wilkinson, D. P., & Strasser, P. (2017) · Angewandte Chemie International Edition · doi:10.1002/anie.201608601 · Cited by 924
PEM Fuel cell and electrolysis cell technologies and hydrogen infrastructure development – a review
Wang, Y., Pang, Y., Xu, H., Martinez, A., & Chen, K. S. (2022) · Energy & Environmental Science · doi:10.1039/d2ee00790h · Cited by 828
Feng, Q., Yuan, X., Liu, G., Wei, B., Zhang, Z., Li, H., & Wang, H. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.09.006 · Cited by 776
Metadata
- Authors
- Debe, M. K., Hendricks, S. M., Vernstrom, G. D., Meyers, M., Brostrom, M., Stephens, M., Chan, Q., Willey, J., Hamden, M., Mittelsteadt, C. K., Capuano, C. B., Ayers, K. E., & Anderson, E. B.
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 2012
- Volume
- 159
- Issue
- 6
- Pages
- K165-K176
- ISSN
- 0013-4651 (ISSN-L)
- 1945-7111
- OpenAlex
- W2084147235
- Cited by
- 183
- References
- 1
- FWCI
- 4.27
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.