The DOI matches its Crossref record.
Multiscale Hybrid Micro‐Nanocomposites Based on Carbon Nanotubes and Carbon Fibers
Open accessAbstract
Amino‐modified double wall carbon nanotube (DWCNT‐NH 2)/carbon fiber (CF)/epoxy hybrid micro‐nanocomposite laminates were prepared by a resin infusion technique. DWCNT‐NH 2/epoxy nanocomposites and carbon fiber/epoxy microcomposites were made for comparison. Morphological analysis of the hybrid composites was performed using field emission scanning electron microscope. A good dispersion at low loadings of carbon nanotubes (CNTs) in epoxy matrix was achieved by a bath ultrasonication method. Mechanical characterization of the hybrid micro‐nanocomposites manufactured by a resin infusion process included three‐point bending, mode I interlaminar toughness, dynamic mechanical analysis, and drop‐weight impact testing. The addition of small amounts of CNTs (0.025, 0.05, and 0.1 wt%) to epoxy resins for the fabrication of multiscale carbon fiber composites resulted in a maximum enhancement in flexural modulus by 35%, a 5% improvement in flexural strength, a 6% improvement in absorbed impact energy, and 23% decrease in the mode I interlaminar toughness. Hybridization of carbon fiber‐reinforced epoxy using CNTs resulted in a reduction in Tg and dampening characteristics, presumably as a result of the presence of micron‐sized agglomerates.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Epoxy/graphene nanocomposites – processing and properties: a review
Wei, J., Vo, T., & Inam, F. (2015) · RSC Advances · doi:10.1039/c5ra13897c · Cited by 267
Self-citationZhang, H., Liu, Y., Kuwata, M., Bilotti, E., & Peijs, T. (2015) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2014.11.029 · Cited by 266
Self-citationBeyth, N., Yudovin-Farber, I., Perez-Davidi, M., Domb, A. J., & Weiss, E. I. (2010) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1010341107 · Cited by 192
Metadata
- Authors
- Inam, F., Wong, D. W. Y., Kuwata, M., & Peijs, T.
- Venue
- Journal of Nanomaterials
- Publisher
- Wiley
- Published
- 2010-01
- Volume
- 2010
- Issue
- 1
- ISSN
- 1687-4110 (ISSN-L)
- 1687-4129
- OpenAlex
- W2074620738
- Cited by
- 164
- References
- 0
- FWCI
- 5.10
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Multiscale Hybrid Micro‐Nanocomposites Based on Carbon Nanotubes and Carbon Fibers. https://app.cochat.ai/papers/10.1155/2010/453420
- The paper
- Inam, F., Wong, D. W. Y., Kuwata, M., & Peijs, T. (2010). Multiscale Hybrid Micro‐Nanocomposites Based on Carbon Nanotubes and Carbon Fibers. Journal of Nanomaterials. https://doi.org/10.1155/2010/453420
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.