The DOI matches its Crossref record; 37 of the 37 references it cites were found in a registry or an index.
Gearbox Fault Identification and Classification with Convolutional Neural Networks
Open accessAbstract
Vibration signals of gearbox are sensitive to the existence of the fault. Based on vibration signals, this paper presents an implementation of deep learning algorithm convolutional neural network (CNN) used for fault identification and classification in gearboxes. Different combinations of condition patterns based on some basic fault conditions are considered. 20 test cases with different combinations of condition patterns are used, where each test case includes 12 combinations of different basic condition patterns. Vibration signals are preprocessed using statistical measures from the time domain signal such as standard deviation, skewness, and kurtosis. In the frequency domain, the spectrum obtained with FFT is divided into multiple bands, and the root mean square (RMS) value is calculated for each one so the energy maintains its shape at the spectrum peaks. The achieved accuracy indicates that the proposed approach is highly reliable and applicable in fault diagnosis of industrial reciprocating machinery. Comparing with peer algorithms, the present method exhibits the best performance in the gearbox fault diagnosis.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Gradient-based learning applied to document recognition
Lecun, Y., Bottou, L., Bengio, Y., & Haffner, P. (1998) · Proceedings of the IEEE · doi:10.1109/5.726791 · Cited by 58,805
LIBSVM: A library for support vector machines
Chang, C.-C., & Lin, C.-J. (2011) · ACM Transactions on Intelligent Systems and Technology · doi:10.1145/1961189.1961199 · Cited by 40,918
Receptive fields, binocular interaction and functional architecture in the cat’s visual cortex
Hubel, D. H., & Wiesel, T. N. (1962) · The Journal of Physiology · doi:10.1113/jphysiol.1962.sp006837 · Cited by 13,680
Backpropagation Applied to Handwritten Zip Code Recognition
LeCun, Y., Boser, B., Denker, J. S., Henderson, D., Howard, R. E., Hubbard, W., & Jackel, L. D. (1989) · Neural Computation · doi:10.1162/neco.1989.1.4.541 · Cited by 11,891
Learning Deep Architectures for AI
Bengio, Y. (2009) · Foundations and Trends® in Machine Learning · doi:10.1561/2200000006 · Cited by 9,239
Fukushima, K. (1980) · Biological Cybernetics · doi:10.1007/bf00344251 · Cited by 5,759
Learning Deep Architectures for AI
Bengio, Y. (2009) · now publishers, Inc. eBooks · doi:10.1561/9781601982957 · Cited by 4,941
A review on machinery diagnostics and prognostics implementing condition-based maintenance
Jardine, A. K. S., Lin, D., & Banjevic, D. (2006) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2005.09.012 · Cited by 4,816
Wavelets for fault diagnosis of rotary machines: A review with applications
Yan, R., Gao, R. X., & Chen, X. (2014) · Signal Processing · doi:10.1016/j.sigpro.2013.04.015 · Cited by 1,446
Deep convolutional neural networks for multi-modality isointense infant brain image segmentation
Zhang, W., Li, R., Deng, H., Wang, L., Lin, W., Ji, S., & Shen, D. (2015) · NeuroImage · doi:10.1016/j.neuroimage.2014.12.061 · Cited by 817
Ben Ali, J., Fnaiech, N., Saidi, L., Chebel-Morello, B., & Fnaiech, F. (2015) · Applied Acoustics · doi:10.1016/j.apacoust.2014.08.016 · Cited by 768
Matsugu, M., Mori, K., Mitari, Y., & Kaneda, Y. (2003) · Neural Networks · doi:10.1016/s0893-6080(03)00115-1 · Cited by 715
Failure diagnosis using deep belief learning based health state classification
Tamilselvan, P., & Wang, P. (2013) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2013.02.022 · Cited by 630
Notes on Convolutional Neural NetworksPreprint
Bouvrie, J. (2006) · CogPrints (University of Southampton) · Cited by 435
An enhanced Kurtogram method for fault diagnosis of rolling element bearings
Wang, D., Tse, P. W., & Tsui, K. L. (2013) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2012.10.003 · Cited by 409
Tran, V. T., AlThobiani, F., & Ball, A. (2014) · Expert Systems with Applications · doi:10.1016/j.eswa.2013.12.026 · Cited by 386
A multidimensional hybrid intelligent method for gear fault diagnosis
Lei, Y., Zuo, M. J., He, Z., & Zi, Y. (2010) · Expert Systems with Applications · doi:10.1016/j.eswa.2009.06.060 · Cited by 240
Dynamic neural network-based fault diagnosis of gas turbine engines
Sina Tayarani-Bathaie, S., Sadough Vanini, Z. N., & Khorasani, K. (2014) · Neurocomputing · doi:10.1016/j.neucom.2012.06.050 · Cited by 226
A quantitative theory of immediate visual recognition
Serre, T., Kreiman, G., Kouh, M., Cadieu, C., Knoblich, U., & Poggio, T. (2007) · Progress in Brain Research · doi:10.1016/s0079-6123(06)65004-8 · Cited by 219
Intelligent fault diagnosis of rotating machinery using infrared thermal image
Younus, A. M. D., & Yang, B.-S. (2012) · Expert Systems with Applications · doi:10.1016/j.eswa.2011.08.004 · Cited by 172
Chen, F., Tang, B., & Chen, R. (2012) · Measurement · doi:10.1016/j.measurement.2012.06.009 · Cited by 157
Application of acoustic emission to seeded gear fault detection
Toutountzakis, T., Tan, C. K., & Mba, D. (2004) · NDT & E International · doi:10.1016/j.ndteint.2004.06.008 · Cited by 156
Robust health evaluation of gearbox subject to tooth failure with wavelet decomposition
Wang, D., Miao, Q., & Kang, R. (2009) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2009.02.013 · Cited by 136
Fault detection of planetary gearboxes using new diagnostic parameters
Lei, Y., Kong, D., Lin, J., & Zuo, M. J. (2012) · Measurement Science and Technology · doi:10.1088/0957-0233/23/5/055605 · Cited by 126
Machine Fault Signature Analysis
Jayaswal, P., Wadhwani, A. K., & Mulchandani, K. B. (2008) · International Journal of Rotating Machinery · doi:10.1155/2008/583982 · Cited by 111
Li, C., Liang, M., & Wang, T. (2015) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2015.04.004 · Cited by 109
Self-citationAmarnath, M., & Krishna, I. R. P. (2014) · Measurement · doi:10.1016/j.measurement.2014.08.015 · Cited by 101
Rolling Bearing Fault Classification Based on Envelope Spectrum and Support Vector Machine
Guo, L., Chen, J., & Li, X. (2009) · Journal of Vibration and Control · doi:10.1177/1077546308095224 · Cited by 99
Wang, D., Tse, P. W.-T., Guo, W. J., et al. (2010) · Measurement Science and Technology · doi:10.1088/0957-0233/22/2/025102 · Cited by 99
Abu-Mahfouz, I. (2005) · International Journal of General Systems · doi:10.1080/03081070500065726 · Cited by 83
A sparse-response deep belief network based on rate distortion theory
Ji, N., Zhang, J., & Zhang, C. (2014) · Pattern Recognition · doi:10.1016/j.patcog.2014.03.025 · Cited by 75
A 3D model recognition mechanism based on deep Boltzmann machines
Leng, B., Zhang, X., Ming, Y., & Xiong, Z. (2014) · Neurocomputing · doi:10.1016/j.neucom.2014.06.084 · Cited by 60
Wang, Y., He, Z., Xiang, J., & Zi, Y. (2011) · Mechanism and Machine Theory · doi:10.1016/j.mechmachtheory.2011.08.007 · Cited by 58
A vibration cavitation sensitivity parameter based on spectral and statistical methods
McKee, K. K., Forbes, G. L., Mazhar, I., et al. (2014) · Expert Systems with Applications · doi:10.1016/j.eswa.2014.07.029 · Cited by 54
Fault Detection and Diagnosis Using Support Vector Machines - A SVC and SVR Comparison
de Souza, D. L., Granzotto, M. H., de Almeida, G. M., & Oliveira-Lopes, L. C. (2014) · Journal of safety engineering · doi:10.5923/j.safety.20140301.03 · Cited by 38
Vibration signal demodulation and bearing fault detection: A clustering-based segmentation method
Hou, S., Liang, M., Zhang, Y., & Li, C. (2013) · Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science · doi:10.1177/0954406213514960 · Cited by 13
Self-citationModel of MT and MST areas using an autoencoder
Katayama, K., Ando, M., & Horiguchi, T. (2003) · Physica A Statistical Mechanics and its Applications · doi:10.1016/s0378-4371(02)01803-4 · Cited by 7
Cited by
Deep learning and its applications to machine health monitoring
Zhao, R., Yan, R., Chen, Z., Mao, K., Wang, P., & Gao, R. X. (2019) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2018.05.050 · Cited by 2,894
Self-citationDeep learning for smart manufacturing: Methods and applications
Wang, J., Ma, Y., Zhang, L., Gao, R. X., & Wu, D. (2018) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2018.01.003 · Cited by 1,740
Convolutional Neural Network Based Fault Detection for Rotating Machinery
Janssens, O., Slavkovikj, V., Vervisch, B., Stockman, K., Loccufier, M., Verstockt, S., Van de Walle, R., & Van Hoecke, S. (2016) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2016.05.027 · Cited by 1,255
A review on the application of deep learning in system health management
Khan, S., & Yairi, T. (2018) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2017.11.024 · Cited by 1,133
Multiscale Convolutional Neural Networks for Fault Diagnosis of Wind Turbine Gearbox
Jiang, G., He, H., Yan, J., & Xie, P. (2019) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2018.2844805 · Cited by 892
Metadata
- Authors
- Chen, Z., Li, C., & Sanchez, R.-V.
- Venue
- Shock and Vibration
- Publisher
- Wiley
- Published
- 2015
- Volume
- 2015
- Pages
- 1-10
- ISSN
- 1070-9622 (ISSN-L)
- 1875-9203
- OpenAlex
- W2126584714
- Cited by
- 391
- References
- 37
- FWCI
- 17.32
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.