Multiple-Fault Detection Methodology Based on Vibration and Current Analysis Applied to Bearings in Induction Motors and Gearboxes on the Kinematic Chain
Open accessThe DOI matches its Crossref record; 39 of the 39 references it cites were found in a registry or an index.
Abstract
Gearboxes and induction motors are important components in industrial applications and their monitoring condition is critical in the industrial sector so as to reduce costs and maintenance downtimes. There are several techniques associated with the fault diagnosis in rotating machinery; however, vibration and stator currents analysis are commonly used due to their proven reliability. Indeed, vibration and current analysis provide fault condition information by means of the fault-related spectral component identification. This work presents a methodology based on vibration and current analysis for the diagnosis of wear in a gearbox and the detection of bearing defect in an induction motor both linked to the same kinematic chain; besides, the location of the fault-related components for analysis is supported by the corresponding theoretical models. The theoretical models are based on calculation of characteristic gearbox and bearings fault frequencies, in order to locate the spectral components of the faults. In this work, the influence of vibrations over the system is observed by performing motor current signal analysis to detect the presence of faults. The obtained results show the feasibility of detecting multiple faults in a kinematic chain, making the proposed methodology suitable to be used in the application of industrial machinery diagnosis.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures





























Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“ey found that the proposed method can perfectly detect the presence of wear at low operating frequencies but is not suitable at high operating frequencies.”
From Vibration Analysis for Machine Monitoring and Diagnosis: A Systematic Review (2021) · cites this paper as [8]
Experimental — accuracy not yet measuredThe cited source says what the claim attributes to it.
In the citing paper
“According to Saucedo-Dorantes et al. [8], the percentage of fault diagnosis techniques conducted with the means of vibration analysis exceeds 82%.”
From Vibration Analysis for Machine Monitoring and Diagnosis: A Systematic Review (2021) · cites this paper as [8]
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Advances in Diagnostic Techniques for Induction Machines
Bellini, A., Filippetti, F., Tassoni, C., & Capolino, G.-A. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.2007527 · Cited by 1,140
Bearing Health Monitoring Based on Hilbert–Huang Transform, Support Vector Machine, and Regression
Soualhi, A., Medjaher, K., & Zerhouni, N. (2015) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2014.2330494 · Cited by 665 · cited 1×
“For instance, in [28], a single fault in bearings is diagnosed and detected using HHT and Support Vector Machines (SVM) applied to the vibration signal.”
MethodTrends in Fault Diagnosis for Electrical Machines: A Review of Diagnostic Techniques
Henao, H., Capolino, G.-A., Fernandez-Cabanas, M., Filippetti, F., Bruzzese, C., Strangas, E., Pusca, R., Estima, J., Riera-Guasp, M., & Hedayati-Kia, S. (2014) · IEEE Industrial Electronics Magazine · doi:10.1109/mie.2013.2287651 · Cited by 602 · cited 1×
“In many applications, induction motors are connected to gearboxes [7, 8], and it is important to identify faulty conditions at an early stage while these elements are under operation along with the related kinematic chain.”
BackgroundAn Artificial Neural Network Approach for Early Fault Detection of Gearbox Bearings
Bangalore, P., & Tjernberg, L. B. (2015) · IEEE Transactions on Smart Grid · doi:10.1109/tsg.2014.2386305 · Cited by 339 · cited 1×
“In gearboxes, however, the possibility of gear fault appearing is lower, around 26%, but an early stage fault, as uniform wear, may cause severe consequences [9, 10].”
BackgroundReview of Automatic Fault Diagnosis Systems Using Audio and Vibration Signals
Henriquez, P., Alonso, J. B., Ferrer, M. A., & Travieso, C. M. (2014) · IEEE Transactions on Systems, Man, and Cybernetics: Systems · doi:10.1109/tsmcc.2013.2257752 · Cited by 314 · cited 2×
“In gearboxes, however, the possibility of gear fault appearing is lower, around 26%, but an early stage fault, as uniform wear, may cause severe consequences [9, 10].”
BackgroundLeite, V. C. M. N., Borges da Silva, J. G., Veloso, G. F. C., Borges da Silva, L. E., Lambert-Torres, G., Bonaldi, E. L., & de Lacerda de Oliveira, L. E. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2345330 · Cited by 274
Frosini, L., Harlisca, C., & Szabo, L. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2361115 · Cited by 264 · cited 1×
“has been used and reported in different studies [5, 11], and the artificial damaged bearingmodel 6205-2ZNR used in this experimentation is shown in Figure 5.”
MethodNiu, G., Yang, B.-S., & Pecht, M. (2010) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2010.02.016 · Cited by 257 · cited 1×
“This topic has attracted the attention of many researchers over the last few years [1, 2], emphasizing the necessity of health monitoring and maintenance procedures in manufacturing operations in order to ensure equipment availability, product quality, ontime deliveries, and plant safety [3–6].”
BackgroundCNC machine tool's wear diagnostic and prognostic by using dynamic Bayesian networks
Tobon-Mejia, D. A., Medjaher, K., & Zerhouni, N. (2012) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2011.10.018 · Cited by 237
Vibration Spectrum Imaging: A Novel Bearing Fault Classification Approach
Amar, M., Gondal, I., & Wilson, C. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2327555 · Cited by 222
Cited by
Fault diagnosis of single-phase induction motor based on acoustic signals
Glowacz, A. (2019) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2018.07.044 · Cited by 351
Vibration Analysis for Machine Monitoring and Diagnosis: A Systematic Review
Mohd Ghazali, M. H., & Rahiman, W. (2021) · Shock and Vibration · doi:10.1155/2021/9469318 · Cited by 249
“According to Saucedo-Dorantes et al. [8], the percentage of fault diagnosis techniques conducted with the means of vibration analysis exceeds 82%.”
MethodDiagnosis of the three-phase induction motor using thermal imaging
Glowacz, A., & Glowacz, Z. (2017) · Infrared Physics & Technology · doi:10.1016/j.infrared.2016.12.003 · Cited by 239
Tran, M.-Q., Elsisi, M., Mahmoud, K., Liu, M.-K., Lehtonen, M., & Darwish, M. M. F. (2021) · IEEE Access · doi:10.1109/access.2021.3105297 · Cited by 158
“signature analysis (MCSA) is considered because of its lowcost, non-intrusive, and fast installation [7], [8].”
BackgroundHuang, W., Gao, G., Li, N., Jiang, X., & Zhu, Z. (2018) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2018.2868519 · Cited by 155
Tran, M., Amer, M., Dababat, A., Abdelaziz, A. Y., Dai, H.-J., Liu, M., & Elsisi, M. (2022) · Measurement · doi:10.1016/j.measurement.2022.112398 · Cited by 127
Pacheco-Chérrez, J., Fortoul-Diaz, J. A., Cortés-Santacruz, F., Alonso-Valerdi, L. M., & Ibarra-Zárate, D. I. (2022) · Engineering Failure Analysis · doi:10.1016/j.engfailanal.2022.106515 · Cited by 135
Gangsar, P., & Tiwari, R. (2018) · Measurement · doi:10.1016/j.measurement.2018.12.011 · Cited by 93
Nonlinear dynamic investigations on rolling element bearings: A review
Sharma, A., Upadhyay, N., Kankar, P. K., & Amarnath, M. (2018) · Advances in Mechanical Engineering · doi:10.1177/1687814018764148 · Cited by 77
“Besides that, due to the ease of use, sensitivity toward faults, less time consumption, robustness, wide available range, and other several advantages, about 82% of health monitoring has been carried out using vibrationbased techniques.(11) Moreover, an accelerometer is one of the most suitable sensors for health moni…”
BackgroundAcoustic-Based Fault Diagnosis of Commutator Motor
Głowacz, A. (2018) · Electronics · doi:10.3390/electronics7110299 · Cited by 73
Fault Detection of Stator Inter-Turn Short-Circuit in PMSM on Stator Current and Vibration Signal
Liang, H., Chen, Y., Liang, S., & Wang, C. (2018) · Applied Sciences · doi:10.3390/app8091677 · Cited by 71
“A method based on a variety of signals has been used in the fault diagnosis of induction motors [17].”
MethodBearing fault diagnosis using multiple feature selection algorithms with SVM
Kumar, R., & Anand, R. S. (2024) · Progress in Artificial Intelligence · doi:10.1007/s13748-024-00324-1 · Cited by 71
A Review to Diagnose Faults Related to Three-Phase Industrial Induction Motors
Sheikh, M. A., Bakhsh, S. T., Irfan, M., Nor, N. M., & Nowakowski, G. (2022) · Journal of Failure Analysis and Prevention · doi:10.1007/s11668-022-01445-2 · Cited by 71
“Because the bearings direct motion to the rotor, a bearing failure will cause radial motion between the stator and the rotor [58].”
BackgroundYamamoto, G. K., da Costa, C., & Sousa, J. S. D. S. (2016) · Case Studies in Mechanical Systems and Signal Processing · doi:10.1016/j.csmssp.2016.07.001 · Cited by 56
Gritli, Y., Bellini, A., Rossi, C., Casadei, D., Filippetti, F., & Capolino, G. (2017) · IEEE International Symposium on Diagnostics for Electrical Machines, Power Electronics and Drives (SDEMPED) · doi:10.1109/demped.2017.8062337 · Cited by 57
Afanaseva, O., Bezyukov, O. K., Первухин, Д. А., & Tukeev, D. L. (2023) · Inventions · doi:10.3390/inventions8030071 · Cited by 55
Barusu, M. R., & Deivasigamani, M. (2020) · IEEE Sensors Journal · doi:10.1109/jsen.2020.3004515 · Cited by 55
A systematic review on advancement and challenges in multi-fault diagnosis of rotating machines
Mishra, R. K., Choudhary, A., Fatima, S., Mohanty, A. R., & Panigrahi, B. K. (2025) · Engineering Applications of Artificial Intelligence · doi:10.1016/j.engappai.2025.111306 · Cited by 46
Online Fault Detection of Rear Stroke Suspension Sensor in Motorcycle
Capriglione, D., Carratù, M., Pietrosanto, A., & Sommella, P. (2019) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2019.2905945 · Cited by 44
Guo, P., Fu, J., & Yang, X. (2018) · Energies · doi:10.3390/en11092248 · Cited by 39
Guo, J., Shi, Z., Li, H., Zhen, D., Gu, F., & Ball, A. D. (2018) · Sensors · doi:10.3390/s18092908 · Cited by 40
“Early diagnosis of planetary gearbox contributes to the normal operation of mechanical equipment [3,4].”
BackgroundBearings Health Monitoring Based on Frequency-Domain Vibration Signals Analysis
Jawad, S. M., & Jaber, A. A. (2022) · Engineering and Technology Journal · doi:10.30684/etj.2022.131581.1043 · Cited by 43
Saucedo-Dorantes, J. J., Delgado-Prieto, M., Romero-Troncoso, R. D. J., & Osornio-Rios, R. A. (2019) · Applied Soft Computing · doi:10.1016/j.asoc.2019.105497 · Cited by 38
Self-citationVirtual Reality Training Application for the Condition-Based Maintenance of Induction Motors
Checa, D., Saucedo-Dorantes, J. J., Osornio-Rios, R. A., Daviu, J. A. A., & Bustillo, A. (2022) · Applied Sciences · doi:10.3390/app12010414 · Cited by 44
Self-citationGearbox Fault Diagnosis Based on MSCNN-LSTM-CBAM-SE
He, C., Yasenjiang, J., Lv, L., Xu, L., & Lan, Z. (2024) · Sensors · doi:10.3390/s24144682 · Cited by 40
Saucedo-Dorantes, J. J., Zamudio-Ramírez, I., Cureño-Osornio, J., Osornio-Rios, R. A., & Daviu, J. A. A. (2021) · Applied Sciences · doi:10.3390/app11178033 · Cited by 36
“It should be noted that these fault-related frequency components are computed in terms of the number of rolling elements (balls), Nb; the ball diameter, BD; the pitch diameter, PD; the contact angle, θ; and the rotational frequency, frm, [41].”
BackgroundSelf-citationFeng, H., Chen, R., & Wang, Y. (2018) · Advances in Mechanical Engineering · doi:10.1177/1687814018796367 · Cited by 32
“A previous study showed that 82% of health monitoring has been carried out using vibration signals.(10) Sawalhi et al.”
BackgroundRolling bearing fault detection based on vibration signal analysis and cumulative sum control chart
Jawad, S. M., & Abdulhady, J. (2021) · FME Transaction · doi:10.5937/fme2103684m · Cited by 31
“The use of acoustic emission signals is the subject of sound analysis[4].”
BackgroundComparison of Vibration, Sound and Motor Current Signature Analysis for Detection of Gear Box Faults
Thangavelu, P., Saimurugan, M., & Ramachandran, K. I. (2020) · International Journal of Prognostics and Health Management · doi:10.36001/ijphm.2017.v8i2.2642 · Cited by 30
Soft Sensors for Instrument Fault Accommodation in Semiactive Motorcycle Suspension Systems
Capriglione, D., Carratù, M., Pietrosanto, A., & Sommella, P. (2020) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2019.2963552 · Cited by 26
Zamudio-Ramírez, I., Osornio-Rios, R. A., Daviu, J. A. A., Cureño-Osornio, J., & Saucedo-Dorantes, J. J. (2021) · Electronics · doi:10.3390/electronics10121486 · Cited by 24
“These frequencies, which are found to be dependent on bearing geometric dimensions and slip of the motor, are amplified when a fault is present [3,6,16].”
BackgroundMethodSelf-citationThermography-Based Methodology for Multifault Diagnosis on Kinematic Chain
Delgado-Prieto, M., Carino, J. A., Saucedo-Dorantes, J. J., Romero-Troncoso, R. D. J., & Osornio-Rios, R. A. (2018) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2018.2816925 · Cited by 24
“However, most of these studies are focused on the analysis of specific fault conditions, while the application of CBM schemes to industrial environments presents new challenges that must be addressed; multiple faults conditions may appear, overlapping the expected characteristic patterns among them [5].”
BackgroundSelf-citationTian, K., Zhang, T., Ai, Y., & Zhang, W. (2018) · Applied Sciences · doi:10.3390/app8101709 · Cited by 23
Adapting geometry-based polygonal contacts for simulating faulty rolling bearing dynamics
Vehviläinen, M., Rahkola, P., Keränen, J., Halme, J., Sopanen, J., Liukkonen, O., Holopainen, A., Tammi, K., & Belahcen, A. (2023) · Mechanism and Machine Theory · doi:10.1016/j.mechmachtheory.2023.105552 · Cited by 26
“Rolling bearings play a critical role in all rotating machinery [1], contributing to 40% of electrical machine breakdowns [2,3] and up to 90% in small machinery systems [4].”
BackgroundZamudio-Ramírez, I., Saucedo-Dorantes, J. J., Daviu, J. A. A., Osornio-Rios, R. A., & Dunai, L. (2022) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2022.3174049 · Cited by 19
Self-citationMotor fault detection using Quaternion Signal Analysis on FPGA
Contreras-Hernandez, J. L., Almanza-Ojeda, D.-L., Ledesma, S., & Ibarra-Manzano, M.-A. (2019) · Measurement · doi:10.1016/j.measurement.2019.01.088 · Cited by 17
Lakshmipathi, J., Devaraj, S., Marikkannan, S., Gnanasekaran, S., Ramasamy, S., Rakkiyannan, J., & Xu, Y. (2022) · Applied Sciences · doi:10.3390/app122312100 · Cited by 16
Wang, W., & Wang, W. (2018) · Energies · doi:10.3390/en11102542 · Cited by 16
“Reference [28] analyzes the vibration data of the bearings in induction motors and gearboxes on the kinematic chain with the Fast Fourier Transform (FFT) and the motor current data with the Power Spectral Density, then extracts the frequencies of interest from a theoretical model.”
MethodWu, Z., Zhang, Q., Wang, L., Cheng, L., & Zhou, J. (2018) · Entropy · doi:10.3390/e20110873 · Cited by 14
“How to extract fault feature information of a bearing has effectively become the core problem of bearing fault diagnosis [4].”
BackgroundLi, Q., Wong, P. K., Vong, C., Fei, K., & Chan, I. N. (2023) · Electronics · doi:10.3390/electronics13010108 · Cited by 13
Mishra, S. P., & Majumder, A. K. (2022) · Mineral Processing and Extractive Metallurgy Review · doi:10.1080/08827508.2022.2047042 · Cited by 13
A Data-Driven Approach Based Bearing Faults Detection and Diagnosis: A Review
Jawad, S. M., & Jaber, A. A. (2021) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/1094/1/012111 · Cited by 14
A Machine Learning Framework for Bearing Fault Detection in Three-Phase Induction Motors
Rohouma, W. M., Zaitouny, A., Wahid, M. F., Ali, H., & Refaat, S. S. (2024) · International Conference on Smart Grid and Renewable Energy (SGRE) · doi:10.1109/sgre59715.2024.10429024 · Cited by 16
“In [10], the authors proposed a method based on Random Forest (RF) algorithm.”
MethodSaucedo-Dorantes, J. J., Elvira‐Ortiz, D. A., Jaen-Cuéllar, A. Y., Daviu, J. A. A., & Osornio-Rios, R. A. (2023) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2023.3294392 · Cited by 11
“In fact, it has been demonstrated that problems associated with UNB and MIS can be identified by analyzing the IM operation if it is within the kinematic chain; this is due to these conditions producingmechanical forces andmoments leadingtomodifythe kinematic chain behavior [36], [37].”
BackgroundSelf-citationDubaish, A. A., & Jaber, A. A. (2023) · Engineering and Technology Journal · doi:10.30684/etj.2023.142462.1535 · Cited by 14
Barshikar, R. R., & Baviskar, P. R. (2023) · International Journal on Interactive Design and Manufacturing (IJIDeM) · doi:10.1007/s12008-023-01268-x · Cited by 8
Machinery Anomaly Detection using artificial neural networks and signature feature extraction
Mayaki, M. Z. A., & Riveill, M. (2023) · International Joint Conference on Neural Networks (IJCNN) · doi:10.1109/ijcnn54540.2023.10191814 · Cited by 9
“Saucedo et al. [9] used fast Fourier transform (FFT) and Power Spectral Density (PSD) to analyze the vibration and current to diagnose different levels of uniform wear in a gearbox.”
BackgroundMethodLi, L.-L., Liu, J., Zhao, W.-B., & Dong, L. (2021) · Symmetry · doi:10.3390/sym13020163 · Cited by 10
Zhou, J., Liu, L., Shen, X., & Yang, X. (2023) · Applied Sciences · doi:10.3390/app13137350 · Cited by 7
Rotating Machinery Prognostics and Application of Machine Learning Algorithms
Techane, A. W., Wang, Y., & Woldegiorgis, B. H. (2018) · Annual Conference of the PHM Society · doi:10.36001/phmconf.2018.v10i1.253 · Cited by 7
Alviento, E. V., Cabais, J. B., Fajardo, J. M. M., Garcia, R. G., & Ballado, A. H. (2021) · IEEE International Colloquium on Signal Processing & Its Applications (CSPA) · doi:10.1109/cspa52141.2021.9377285 · Cited by 6
Diagnosis of multiple faults of an induction motor based on Hilbert envelope analysis
Kabul, A., & Ünsal, A. (2021) · Metrology and Measurement Systems · doi:10.24425/mms.2022.138541 · Cited by 6
“At the same time, only few studies of diagnosis of multiple faults have been reported [7].”
BackgroundComparison of Data Sources for Robot Gear Condition Monitoring
Nentwich, C., & Daub, R. (2022) · Procedia CIRP · doi:10.1016/j.procir.2022.04.051 · Cited by 5
An IFDI Scheme for Stroke Sensors in Motorcycle Semi-Active Suspension Systems
Capriglione, D., Carratù, M., Pietrosanto, A., & Sommella, P. (2019) · IEEE International Instrumentation and Measurement Technology Conference · doi:10.1109/i2mtc.2019.8826849 · Cited by 4
“[8] M. A. Hmida and A. Braham, “An On-Line Condition Monitoring System for Incipient Fault Detection in Double-Cage Induction Motor,” IEEE Transactions on Instrumentation and Measurement, Vol. 67, No. 8, August 2018, pp. 1850-1858.”
BackgroundInfluentialAnalyzing Vibration as a Useful Domain for Getting Bearing Fault Signals in Induction Motors
Tabasi, M., Ojaghi, M., & Mostafavi, M. (2021) · International Journal of Engineering · doi:10.5829/ije.2021.34.08b.22 · Cited by 6
Zamudio-Ramírez, I., Osornio-Rios, R. A., & Daviu, J. A. A. (2021) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce47101.2021.9595696 · Cited by 4
Self-citationKumar, R., & Anand, R. S. (2024) · Engineering Research Express · doi:10.1088/2631-8695/ad43bd · Cited by 4
Aldeoes, Y. N., Gokhale, P., & Sondkar, S. (2023) · Signals and communication technology · doi:10.1007/978-3-031-29713-7_6 · Cited by 6
Hybrid Vibration Sensor for Equipment Monitoring and Diagnostics
Васильевич, Б. И., Бочкарев, И. В., Khramshin, V. R., & Gasiyarov, V. R. (2024) · Sensors · doi:10.3390/s24113535 · Cited by 3
“According to [12], the percentage of vibration-based fault diagnostic techniques exceeds 82%.”
BackgroundMethod3D Multibody Simulation of Realistic Rolling Bearing Defects for Fault Classifier Development
Vehviläinen, M., Tahkola, M., Keränen, J., Bouharrouti, N. E., Rahkola, P., Halme, J., Pippuri-Mäkeläinen, J., & Belahcen, A. (2024) · International Conference on Electrical Machines (ICEM) · doi:10.1109/icem60801.2024.10700332 · Cited by 3
“Rolling bearing faults are a primary cause of breakdowns, contributing to 40% of electrical machine breakdowns [1] and up to 90% in small machinery systems [2].”
BackgroundResearch on Control Technologies for a High-Precision Multi-Source Vibration Simulation System
Ma, X., Chen, Z., He, H., & Zhao, Y. (2018) · Energies · doi:10.3390/en11112956 · Cited by 3
Real-Time Vibration Monitoring Using MEMS Vibration Sensors
Ghazali, M. H. M., & Rahiman, W. (2022) · Lecture notes in electrical engineering · doi:10.1007/978-981-16-8129-5_56 · Cited by 3
A New Artificial Neural Network-Based Failure Determination System for Electric Motors
Bıçakçı, S., Çoramık, M., Gunes, H., Citak, H., & Ege, Y. (2021) · Arabian Journal for Science and Engineering · doi:10.1007/s13369-021-05594-8 · Cited by 3
Zamudio-Ramírez, I. (2023) · RiuNet (Universitat Politècnica de València) · doi:10.4995/thesis/10251/197989 · Cited by 3
Design of a Low-Noise Signal Conditioning Circuit for Analog MEMS Accelerometers
Romanssini, M., Compassi-Severo, L., de Aguirre, P. C. C., & Girardi, A. (2023) · International Symposium on Instrumentation Systems, Circuits and Transducers (INSCIT) · doi:10.1109/inscit59673.2023.10258504 · Cited by 2
“This kind of analysis emerges as a popular choice, because many faults can be identified without stopping the machine or tearing the machine down [3].”
BackgroundCurrent-Based Gear Fault Detection for Locomotive Gearboxes
Zhang, Z., & Yang, J. (2018) · Prognostics and System Health Management Conference · doi:10.1109/phm-chongqing.2018.00211 · Cited by 2
“Wavelet analysis is suitable for analyzing the stator current signal because of its higher frequency resolution[6-8,13].”
BackgroundFadzail, N. F., Zali, S. M., & Mid, E. C. (2024) · International Journal of Power Electronics and Drive Systems/International Journal of Electrical and Computer Engineering · doi:10.11591/ijece.v14i3.pp3342-3349 · Cited by 1
“In study [18], induction motor bearings and gearbox bearings on the kinematic chain are analyzed using a multiple-fault detection approach based on vibration and current analysis.”
MethodKuendee, P. (2019) · International Conference on Big Data and Internet of Things (BDIOT) · doi:10.1145/3361758.3361772 · Cited by 1
“Generally, the vibration signal is the most popular used as an input to detect faults of the machines because of good representative for the fault severity [8-9].”
BackgroundJathursajan, K., & Wijethunge, A. (2022) · Advances in Technology · doi:10.31357/ait.v2i2.5475 · Cited by 1
“that these fault-related frequency components are computed in terms of the number of rolling elements (balls), N; the ball diameter, BD; the pitch diameter, PD; the contact angle, θ; and the rotational frequency, f, [35].”
BackgroundJathursajan, K., & Wijethunge, A. (2022) · Moratuwa Engineering Research Conference (MERCon) · doi:10.1109/mercon55799.2022.9906173 · Cited by 1
Asenkron Motor Eş Zamanlı Çoklu Arızalarının Titreşim Sinyalleri ile Çok Etiketli Sınıflandırılması
ERCİRE, M., & Ünsal, A. (2024) · Düzce Üniversitesi Bilim ve Teknoloji Dergisi · doi:10.29130/dubited.1288799 · Cited by 1
Real-Time Identification of Periodic Signals using the Recursive Variable Projection Algorithm
Handler, J., Ninevski, D., Rollett, M., & O'Leary, P. L. (2022) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon49645.2022.9968918 · Cited by 1
“Vibration measurement, in particular, is essential for the detection and diagnosis of anomalous machine behavior [3]–[5].”
BackgroundTowards Self-aware and Environment-aware Power Converters
Mariani, G. B., Foube, L., Chapalain, N., Kawahara, C., Rojko, A., & Degrenne, N. (2020) · PHM Society European Conference · doi:10.36001/phme.2020.v5i1.1220
APPLICATION FOR VIBRATION DIAGNOSTICS
Stakhova, A. (2022) · Informatyka Automatyka Pomiary w Gospodarce i Ochronie Środowiska · doi:10.35784/iapgos.2903
Time Domain and Envelope Fault Diagnosis of Rolling Element Bearing
Singh, A., Tomar, A. S., Agrawal, P., & Jayaswal, P. (2023) · Proceedings in adaptation, learning and optimization · doi:10.1007/978-3-031-31164-2_10
ВІБРОДІАГНОСТИЧНИЙ КОМПЛЕКС ДЛЯ ДОСЛІДЖЕННЯ ТРИБОЛОГІЧНИХ ПРОЦЕСІВ
Lytvynov, O., & Dykha, A. (2025) · Herald of Khmelnytskyi National University Technical sciences · doi:10.31891/2307-5732-2025-349-34
Mayaki, M. Z. A. (2024) · theses.fr (ABES) · doi:10.70675/e8e2614az79ffz4901z9c79ze9f9889ba9c4
Joe, B.-J., Hong, S.-Y., & Song, J.-H. (2026) · Noise Control Engineering Journal · doi:10.3397/1/377424
Recent trends on bearing faults diagnosis of IM using vibration signal: a critical review
Yadav, O. P., Joshi, D., & Chauhan, R. K. (2026) · Sadhana · doi:10.1007/s12046-026-03235-0
Abdellaoui, J., Helali, A., & Guedria, N. B. (2026) · International Conference on Control, Automation and Diagnosis (ICCAD) · doi:10.1109/iccad69956.2026.11643115
“Recent diagnostic research has placed more emphasis on the need for simultaneous/compound failure detection because the signature associated with the failure of an individual component has a different vibration0 signature than that of failures occurring together [3,4].”
Metadata
- Authors
- Saucedo-Dorantes, J. J., Delgado-Prieto, M., Ortega-Redondo, J. A., Osornio-Rios, R. A., & Romero-Troncoso, R. D. J.
- Affiliations
- CA Mecatronica, Facultad de Ingenieria, Campus San Juan del Rio, Universidad Autónoma de Querétaro, Rio Moctezuma 249, Colonia San Cayetano, 76807 San Juan del Rio, QRO, Mexico
- Universitat Politècnica de Catalunya (ES)
- Technical University of Catalonia (UPC), Department of Electronic Engineering, MCIA Research Center, Rambla San Nebridi No. 22, Gaia Research Building, 08222 Terrassa, Spain
- Autonomous University of Queretaro (MX)
- CA Procesamiento Digital de Señales, CA Telematica, Division de Ingenierias, Campus Irapuato-Salamanca, Universidad de Guanajuato, Carretera Salamanca-Valle km 3.5 + 1.8, Comunidad de Palo Blanco, 36700 Salamanca, GTO, Mexico
- Venue
- Shock and Vibration
- Publisher
- Wiley
- Published
- 2016
- Volume
- 2016
- Pages
- 1-13
- ISSN
- 1070-9622 (ISSN-L)
- 1875-9203
- OpenAlex
- W2296231270
- Cited by
- 80
- References
- 38
- Citations by year
- 2026: 3 · 2025: 2 · 2024: 9 · 2023: 12 · 2022: 14 · 2021: 12 · 2020: 4 · 2019: 5 · 2018: 16 · 2017: 1 · 2016: 2
- FWCI
- 6.73
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Locations
- Shock and Vibration (publishedVersion, cc-by)
- RECERCAT (Consorci de Serveis Universitaris de Catalunya) (publishedVersion, other-oa)
- UPCommons institutional repository (Universitat Politècnica de Catalunya) (publishedVersion, cc-by-nc-nd)
- LA Referencia (Red Federada de Repositorios Institucionales de Publicaciones Científicas) (submittedVersion, cc-by-nc-nd)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- TECNALIA Publications (Fundación TECNALIA Research & Innovation) (submittedVersion, public-domain)
- Funders
- Consejo Nacional de Ciencia y Tecnología (278033, 222453-2013)
- Topics
- Physical Sciences › Engineering › Control and Systems Engineering › Machine Fault Diagnosis Techniques
- Physical Sciences › Engineering › Mechanical Engineering › Gear and Bearing Dynamics Analysis
- Physical Sciences › Engineering › Control and Systems Engineering › Fault Detection and Control Systems
- Keywords
- multiple fault detection, bearing fault diagnosis, induction motor, motor current signature analysis, vibration analysis, kinematic chains, rotating machinery condition monitoring
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.