Rolling Bearing Diagnosing Method Based on Time Domain Analysis and Adaptive FuzzyC-Means Clustering
Open accessThe DOI matches its Crossref record; 19 of the 19 references it cites were found in a registry or an index.
Abstract
Vibration signal analysis is one of the most effective methods for mechanical fault diagnosis. Available part of the information is always concealed in component noise, which makes it much more difficult to detect the defection, especially at early stage of the development. This paper presents a new approach for mechanical fault diagnosis based on time domain analysis and adaptive fuzzyC-means clustering. By analyzing vibration signal collected, nine common time domain parameters are calculated. This lot of data constitutes data matrix as characteristic vectors to be detected. And using adaptive fuzzyC-means clustering, the optimal clustering number can be gotten then to recognize different fault types. Moreover, five parameters, including variance, RMS, kurtosis, skewness, and crest factor, of the nine are selected as the new eigenvector matrix to be clustered for more optimal clustering performance. The test results demonstrate that the proposed approach has a sensitive reflection towards fault identifications, including slight fault.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Fault diagnosis of ball bearings using continuous wavelet transform
Kankar, P. K., Sharma, S. C., & Harsha, S. P. (2011) · Applied Soft Computing · doi:10.1016/j.asoc.2010.08.011 · Cited by 313
Safizadeh, M. S., & Latifi, S. K. (2014) · Information Fusion · doi:10.1016/j.inffus.2013.10.002 · Cited by 300 · cited 2×
“Examples of AE applications are crack growth, corrosion, and wear [6].”
BackgroundRolling bearing diagnosing method based on Empirical Mode Decomposition of machine vibration signal
Dybała, J., & Zimroz, R. (2014) · Applied Acoustics · doi:10.1016/j.apacoust.2013.09.001 · Cited by 224 · cited 1×
“So far, for lack of cyclostationarity [1] of the vibration signal, a number of diagnosis methods have been proposed, which are variedly classified as vibration analysis [2], wear debris detection [3], current and temperature monitoring [4], and so on.”
BackgroundYuan, L., He, Y., Huang, J., & Sun, Y. (2010) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2009.2025068 · Cited by 202
Liang, B., Iwnicki, S., & Zhao, Y. (2013) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2013.02.016 · Cited by 145
Identification of Bearing Defects by Spectral Analysis
Taylor, J. I. (1980) · Journal of Mechanical Design · doi:10.1115/1.3254730 · Cited by 99 · cited 1×
“Monitoring these fault characteristic frequencies and their low-frequency harmonics is a classic method for bearing fault diagnosis [9].”
MethodWear debris: a review of properties and constitutive models
Zmitrowicz, A. (2005) · Journal of Theoretical and Applied Mechanics/Mechanika Teoretyczna i Stosowana · Cited by 90
Urbanek, J. K., Barszcz, T., & Antoni, J. (2012) · Measurement · doi:10.1016/j.measurement.2012.11.042 · Cited by 73
Fault Diagnosis System for Rotary Machine Based on Fuzzy Neural Networks
Zhang, S., ASAKURA, T., Xu, X., & Xu, B. (2003) · JSME International Journal Series C · doi:10.1299/jsmec.46.1035 · Cited by 72
Intelligent Diagnosis of Broken Bars in Induction Motors Based on New Features in Vibration Spectrum
Sadoughi, A., Ebrahimi, M., Moallem, M., & Sadri, S. (2007) · IEEE International Symposium on Diagnostics for Electrical Machines, Power Electronics and Drives (SDEMPED) · doi:10.1109/demped.2007.4393079 · Cited by 33
Research works printed but not linked: 4
- 2005, Journal of Theoretical and Applied Mechanics, 43, 3
- 1974, Acustica, 31, 224
- 2008, Journal of Power Electronics, 8, 228
- 2012, Life Science Journal, 9, 1781
Cited by
Review of tool condition monitoring methods in milling processes
Zhou, Y., & Xue, W. (2018) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-018-1768-5 · Cited by 353
Vibration Analysis for Machine Monitoring and Diagnosis: A Systematic Review
Mohd Ghazali, M. H., & Rahiman, W. (2021) · Shock and Vibration · doi:10.1155/2021/9469318 · Cited by 249
A Review of Early Fault Diagnosis Approaches and Their Applications in Rotating Machinery
Wei, Y., Li, Y., Xu, M., & Huang, W. (2019) · Entropy · doi:10.3390/e21040409 · Cited by 232
“[141] Adaptive fuzzy-means clustering Li et al.”
BackgroundA Systematic Review of Fuzzy Formalisms for Bearing Fault Diagnosis
Li, C., de Oliveira, J. V., Cerrada, M., Cabrera, D. R., Sánchez, R., & Zurita, G. (2018) · IEEE Transactions on Fuzzy Systems · doi:10.1109/tfuzz.2018.2878200 · Cited by 150
“[96], an iterative procedure is proposed for the automatic determination of the type of faults in fault classification using time”
MethodLightweight CNN architecture design for rolling bearing fault diagnosis
Jiang, L., Shi, C., Sheng, H., Li, X., & Yang, T. (2024) · Measurement Science and Technology · doi:10.1088/1361-6501/ad7a1a · Cited by 94
Maurya, M., Panigrahi, I., Dash, D., & Malla, C. (2023) · Soft Computing · doi:10.1007/s00500-023-08255-0 · Cited by 91
“…based on vibration have been used extensively to diagnose and detect bearing faults in both the time and frequency domains by Kim et al. (2008), Sharma et al. (2016); Durkhure and Lodwal (2014), Jain and Bhosle (2021), Baiche and Abderrazak (2017), Fu et al. (2016), Nayana and Geethanjali (2017).”
A Review of the Intelligent Condition Monitoring of Rolling Element Bearings
Kannan, V., Zhang, T., & Li, H. (2024) · Machines · doi:10.3390/machines12070484 · Cited by 73
Bearing fault diagnostics using EEMD processing and convolutional neural network methods
Amarouayache, I. I. E., Saadi, M. N., Guersi, N., & Boutasseta, N. (2020) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-020-05315-9 · Cited by 72
GNAR-GARCH model and its application in feature extraction for rolling bearing fault diagnosis
Ma, J., Xu, F., Huang, K., & Huang, R. (2017) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2017.01.043 · Cited by 59
Al-Haddad, L. A., & Jaber, A. A. (2023) · Journal of the Brazilian Society of Mechanical Sciences and Engineering · doi:10.1007/s40430-023-04386-5 · Cited by 58
Puntambekar, R., Vyas, P., Thakkar, A., & Patel, D. (2025) · Neurocomputing · doi:10.1016/j.neucom.2025.131628 · Cited by 58
Deng, W., Nguyen, K. T. P., Medjaher, K., Gogu, C., & Morio, J. (2023) · Advanced Engineering Informatics · doi:10.1016/j.aei.2023.102128 · Cited by 44
Da, T. N., Thanh, P. N., & Cho, M.-Y. (2024) · Internet of Things · doi:10.1016/j.iot.2024.101164 · Cited by 43
Bearings Health Monitoring Based on Frequency-Domain Vibration Signals Analysis
Jawad, S. M., & Jaber, A. A. (2022) · Engineering and Technology Journal · doi:10.30684/etj.2022.131581.1043 · Cited by 43
“Therefore, it is crucial to detect and diagnose faults at the premature stages of their initiation [4].”
BackgroundDjaballah, S., Meftah, K., Khelil, K., & Sayadi, M. (2023) · Journal of Failure Analysis and Prevention · doi:10.1007/s11668-023-01645-4 · Cited by 40
“The fault features are extracted from time domain [3, 4], frequency domain [4, 5], or time–frequency domain [6, 7], using short-time Fourier transform (STFT) and wavelet transform (WT) [6, 7].”
MethodAn information integration approach to spacecraft fault diagnosis
Shi, H., Huang, D., Wang, L., Wu, M.-Y., Xu, Y., Zeng, B.-E., & Chen, P. (2019) · Enterprise Information Systems · doi:10.1080/17517575.2019.1709663 · Cited by 39
“The essence lies in selecting appropriate fault feature parameters, identifying the state of the rolling bearing according to the fault feature parameters, and then determining the corresponding fault type using the fault feature (Fu et al. 2016).”
BackgroundSelf-citationLourari, A. W., Soualhi, A., & Benkedjouh, T. (2024) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-024-13458-2 · Cited by 37
Composite-Graph-Based Sparse Subspace Clustering for Machine Fault Diagnosis
Sun, C., Chen, X., Yan, R., & Gao, R. X. (2019) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2019.2923829 · Cited by 36
“Fuzzy c -means clustering was presented for wind turbine anomaly detection [33], and it was also used for bearing fault diagnosis [34].”
MethodANFIS-based Framework for the Prediction of Bearing’s Remaining Useful Life
Lourari, A. W., Benkedjouh, T., Yousfi, B. E., & Soualhi, A. (2024) · International Journal of Prognostics and Health Management · doi:10.36001/ijphm.2024.v15i1.3791 · Cited by 33
Bearing Health Assessment Using Time Domain Analysis of Vibration Signal
Yadav, O. P., & Pahuja, G. L. (2020) · International Journal of Image Graphics and Signal Processing · doi:10.5815/ijigsp.2020.03.04 · Cited by 32
Kaji, M., Parvizian, J., & van de Venn, H. W. (2020) · Applied Sciences · doi:10.3390/app10248948 · Cited by 33
Rolling bearing fault detection based on vibration signal analysis and cumulative sum control chart
Jawad, S. M., & Abdulhady, J. (2021) · FME Transaction · doi:10.5937/fme2103684m · Cited by 31
“Bearing faults can occur for various reasons, including heavy loads that are unstable and inadequate lubrication[2].”
BackgroundMethodA New Adaptive Mixture Distance-Based Improved Density Peaks Clustering for Gearbox Fault Diagnosis
Sharma, K. K., Seal, A., Yazidi, A., & Krejcar, O. (2022) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2022.3216366 · Cited by 31
“It was also adopted for bearing fault detection [15].”
MethodBearing Fault Diagnosis Using a Grad-CAM-Based Convolutional Neuro-Fuzzy Network
Lin, C., & Jhang, J. (2021) · Mathematics · doi:10.3390/math9131502 · Cited by 31
“[19] employed adaptive fuzzy c-means clustering to recognize different types of bearing faults.”
MethodYang, J., Bai, Y., Wang, J., & Zhao, Y. Y. (2019) · Measurement Science and Technology · doi:10.1088/1361-6501/ab2296 · Cited by 22
Sahu, D., Dewangan, R. K., & Matharu, S. P. S. (2024) · Journal of Failure Analysis and Prevention · doi:10.1007/s11668-024-01919-5 · Cited by 20
“Fu et al. [13] introduced a novel method for diagnosing mechanical faults, which involves time domain analysis and adaptive fuzzy C-means clustering.”
Si, L., Wang, Z., Tan, C., & Liu, X. (2017) · Applied Sciences · doi:10.3390/app7020164 · Cited by 17
“Time-frequency statistical parameters can describe the waveform distribution characteristics of vibration signals, in the time and frequency domain [15,16].”
BackgroundIntelligent Ball Bearing Fault Diagnosis Using Fractional Lorenz Chaos Extension Detection
Tian, A., Fu, C., Li, Y., & Yau, H. (2018) · Sensors · doi:10.3390/s18093069 · Cited by 17
“The fuzzy set [39,40] range can be extended from (0, 1) to (−∞,∞).”
Vibration-based SHM of Dębica railway steel bridge with optimized ANN and ANFIS
Nguyen, D. C., Salamak, M., Katunin, A., Poprawa, G., Przystałka, P., & Hypki, M. (2024) · Journal of Constructional Steel Research · doi:10.1016/j.jcsr.2024.108505 · Cited by 16
A knowledge-based fault diagnosis method for rolling bearings without fault sample training
Chen, Z., Zhang, Q., Zhang, J., Qin, X., & Sun, Y. (2024) · Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science · doi:10.1177/09544062241264267 · Cited by 14
“Kur is more sensitive than RMS to early faults 26 . where x m is the mean value, and x s is the standard deviation.”
A Data-Driven Approach Based Bearing Faults Detection and Diagnosis: A Review
Jawad, S. M., & Jaber, A. A. (2021) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/1094/1/012111 · Cited by 14
“It is essential to diagnose the faults at an early stage before getting expanded [4].”
BackgroundDubaish, A. A., & Jaber, A. A. (2023) · Engineering and Technology Journal · doi:10.30684/etj.2023.142462.1535 · Cited by 14
Kaji, M., Parvizian, J., & van de Venn, H. W. (2020) · Preprints.org · doi:10.20944/preprints202011.0591.v1 · Cited by 14
“Vibration signals generated by the faulty component can be analyzed in the time domain [16], frequency domain [17], or time–frequency domain [18].”
BackgroundSelf-Adaptive Spectrum Analysis Based Bearing Fault Diagnosis
Wu, J., Tang, T., Chen, M., & Hu, T. (2018) · Sensors · doi:10.3390/s18103312 · Cited by 13
Bearing Health State Detection Based on Informer and CNN + Swin Transformer
Liu, C., Zou, W., Hu, Z., Li, H., Sui, X., Ma, X., Yang, F., & Guo, N. (2024) · Machines · doi:10.3390/machines12070456 · Cited by 11
Hotait, H. (2020) · theses.fr (ABES) · doi:10.70675/da5905c7z9e4fz42b6zb246zeaba7e7ac960 · Cited by 8
Optimizing bearing health condition monitoring: exploring correlation feature selection algorithm
Sharma, A., Priya, T. H., & Naidu, V. (2024) · Engineering Research Express · doi:10.1088/2631-8695/ad3380 · Cited by 7
Gouda, K. M., Rycerz, P., Kadiric, A., & Morales-Espejel, G. E. (2019) · Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology · doi:10.1177/1350650119838896 · Cited by 6
“Ongoing scientific efforts are advancing the ability of time-frequency approaches for early fault detection from transient signal characteristics.(15,20,21) Although robust CIs can be extracted from the signals to detect micro-size defects using these approaches, they still suffer from low frequency noise compared to…”
BackgroundAdaptive Deeping Siamese Residual Network: A Novel Model for Few-Shot Bearing Fault Diagnosis
Jiang, Y., Lu, M., Dong, Z., Jiang, Z., Jiao, W., Tang, C. G., Sun, J., & Xuan, Z. (2025) · Machines · doi:10.3390/machines13030193 · Cited by 5
Arun, P., Lincon, S. A., & Prabhakaran, N. (2018) · Australian Journal of Mechanical Engineering · doi:10.1080/14484846.2018.1483468 · Cited by 5
“Apart from these features, Fu et al. (2016) utilised the crest factor (CRF) of the vibration also.”
BackgroundMethodInfluentialZhao, L., Yang, S., & Liu, Y. (2021) · International journal of mechanical system dynamics · doi:10.1002/msd2.12019 · Cited by 5
“17,18 To assess the noise and vibration of automobiles, the hierarchical clustering technique of the un-supervised clustering algorithm is employed.”
MethodSelf-citationKılınç, O., & Vágner, J. (2017) · Vibroengineering PROCEDIA · doi:10.21595/vp.2017.18492 · Cited by 5
“ISSN 2345-0533 recognition of numerous faulty conditions of different components in rotating machinery [13, 14].”
BackgroundAn Automatic Approach to Diagnose Bearing Defects Using Time-Domain Analysis of Vibration Signal
Yadav, O. P., & Pahuja, G. L. (2021) · Lecture notes in electrical engineering · doi:10.1007/978-981-15-9019-1_106 · Cited by 4
Shi, F., & Mo, J. P. T. (2022) · Applied Sciences · doi:10.3390/app12031708 · Cited by 4
Condition Monitoring of Metro Wheelsets Using Wayside Vibration and Acoustic SensorsPreprint
Kılınç, O., & Vágner, J. (2022) · SSRN Electronic Journal · doi:10.2139/ssrn.4170145 · Cited by 4
Zoungrana, W.-B. A. B. (2020) · Constellation (Université du Québec à Chicoutimi) · Cited by 4
Optimized GRU with Self-Attention for Bearing Fault Diagnosis Using Bayesian Hyperparameter Tuning
Liu, Z., Teng, S., & Wang, S. (2025) · Algorithms · doi:10.3390/a18090576 · Cited by 3
Kılınç, O., & Vágner, J. (2016) · Vibroengineering PROCEDIA · doi:10.21595/vp.2016.17430 · Cited by 3
“To identify representative patterns, statistical time-domain feature extraction methods are also used in contemporary studies in bearing fault diagnosis [6, 7].”
MethodWayside diagnosis of running gear related faults in railway vehicles
Kılınç, O. (2017) · Digitální knihovna Univerzity Pardubice (Univerzity Pardubice) · Cited by 3
Wayside Condition Monitoring of Metro Wheelsets Using Vibration and Acoustic Sensors
Kılınç, O., & Vágner, J. (2024) · Traitement du signal · doi:10.18280/ts.410316 · Cited by 2
“…and, wavelet transform [46], HHT-Hilbert Huang Transform and SVMs-Support Vector Machines [47], time domain analysis combined with fuzzy C-means [48], envelope analysis from the Kurtogram [49] as well as various statistical features [50], have been proposed in the literature for detecting…”
MethodFault Diagnosis Method for Mechanical Components Fusing RPM, DAM-IResNet, and Transfer Learning
Ge, X., Chen, Z., Cao, Y., Wu, Z., & Li, Q. (2026) · Sensors · doi:10.3390/s26072162 · Cited by 2
“FU et al. [15] tackled the issue where some features in vibration signals are concealed by component noise.”
FEW-SHOT BEARING FAULT DIAGNOSIS IN TIME-FREQUENCY MAPS USING PROTOTYPICAL NETWORKS
Ma, G., Xu, Z., Gao, W. J., & Chen, J. (2023) · IEEE International Conference on Signal Processing, Communications and Computing (ICSPCC) · doi:10.1109/icspcc59353.2023.10400356 · Cited by 2
“With the increasing precision of industrial machinery and equipment, the interaction between various components during operation becomes more significant [5].”
BackgroundWITHDRAWN: Condition Monitoring of Metro Wheelsets Using Wayside Vibration and Acoustic SensorsPreprint
Kılınç, O., & Vágner, J. (2022) · Research Square · doi:10.21203/rs.3.rs-1776003/v1 · Cited by 2
Deng, W. (2024) · theses.fr (ABES) · doi:10.70675/36384aadz736bz4589z9324z07decc1002ee · Cited by 2
Maliuk, A. S., Nguyen, T.-K., Ahmad, Z., & Kim, J.-M. (2026) · Structural Health Monitoring · doi:10.1177/14759217261433437 · Cited by 1
Babu, T. N., Singh, P. P., Somesh, M., Jha, H. K., Prabha, D. R., Venkatesan, S., & Babu, V. R. (2021) · Journal of Intelligent & Fuzzy Systems · doi:10.3233/jifs-210229 · Cited by 1
MACHINERY ANOMALY DETECTION UNDER INDETERMINATE OPERATING CONDITIONS
Tian, J. R. (2018) · University Libraries (University of Maryland) · doi:10.13016/m26t0h05d · Cited by 1
Kaji, M., Parvizian, J., & van de Venn, H. W. (2020) · Preprints.org · doi:10.20944/preprints202011.0591.v2 · Cited by 1
Wei, X. (2023) · DuEPublico (University of Duisburg-Essen) · doi:10.17185/duepublico/78472 · Cited by 1
A review on identification of defects in the rolling element bearings
J, P., & Chandrasekaran, S. K. (2026) · Noise & Vibration Worldwide · doi:10.1177/09574565261419831
Generation of Proxy Metrics and Signal Analysis for Edge-Based Systems
Anděl, F. (2026) · Brno University of Technology Digital Library (Brno University of Technology)
Recent trends on bearing faults diagnosis of IM using vibration signal: a critical review
Yadav, O. P., Joshi, D., & Chauhan, R. K. (2026) · Sadhana · doi:10.1007/s12046-026-03235-0
Multi-Domain Vibration Analysisfor Early Propeller Fault Diagnosis in Multirotor UAVs
Le, L. T., Nguyen, T., Cho, A., Dang, L. P., Nguyen, C. D. M., Tran, D., Le, T. M., & Dao, S. V. T. (2026) · Advances in computational intelligence and robotics book series · doi:10.4018/979-8-3373-9549-4.ch012
Randhavan, B. M., & kumar, A. S. (2025) · International Journal of Environmental Sciences · doi:10.64252/mw8avh54
Data-Driven Fault Detection of Automotive Engine Mounts Using Onboard Vibration Signals
Chen, Y. (2026) · PORTO@Iris
Metadata
- Authors
- Fu, S., Liu, K., Xu, Y., & Liu, Y.
- Affiliations
- Beijing University of Technology (CN)
- Corresponding author
- Liu, Kun
- Venue
- Shock and Vibration
- Publisher
- Wiley
- Published
- 2016
- Volume
- 2016
- Pages
- 1-8
- ISSN
- 1070-9622 (ISSN-L)
- 1875-9203
- OpenAlex
- W2257037859
- Cited by
- 38
- References
- 19
- Citations by year
- 2026: 4 · 2024: 7 · 2023: 4 · 2022: 5 · 2021: 6 · 2020: 2 · 2019: 4 · 2018: 3 · 2017: 2 · 2016: 1
- FWCI
- 1.85
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Locations
- Shock and Vibration (publishedVersion, cc-by)
- Funders
- National Science and Technology Major Project of China (2010ZX04007-051)
- Beijing Research Institute of Automation for Machinery Industry (2010ZX04007-051)
- Case Western Reserve University (2010ZX04007-051)
- Topics
- Physical Sciences › Engineering › Control and Systems Engineering › Machine Fault Diagnosis Techniques
- Physical Sciences › Engineering › Control and Systems Engineering › Fault Detection and Control Systems
- Physical Sciences › Engineering › Mechanical Engineering › Gear and Bearing Dynamics Analysis
- Keywords
- rolling bearing fault diagnosis, vibration signal analysis, time domain parameters, fault type recognition, early fault detection, kurtosis, skewness, crest factor, RMS
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.