Bearing Fault Diagnosis Based on Domain Adaptation Using Transferable Features under Different Working Conditions
Open accessThe DOI matches its Crossref record; 30 of the 31 references it cites were found in a registry or an index.
Abstract
Bearing failure is the most common failure mode in rotating machinery and can result in large financial losses or even casualties. However, complex structures around bearing and actual variable working conditions can lead to large distribution difference of vibration signal between a training set and a test set, which causes the accuracy‐dropping problem of fault diagnosis. Thus, how to improve efficiently the performance of bearing fault diagnosis under different working conditions is always a primary challenge. In this paper, a novel bearing fault diagnosis under different working conditions method is proposed based on domain adaptation using transferable features(DATF). The datasets of normal bearing and faulty bearings are obtained through the fast Fourier transformation (FFT) of raw vibration signals under different motor speeds and load conditions. Then we reduce marginal and conditional distributions simultaneously across domains based on maximum mean discrepancy (MMD) in feature space by refining pseudo test labels, which can be obtained by the nearest‐neighbor (NN) classifier built on training data, and then a robust transferable feature representation for training and test domains is achieved after several iterations. With the help of the NN classifier trained on transferable features, bearing fault categories are identified accurately in final. Extensive experiment results show that the proposed method under different working conditions can identify the bearing faults accurately and outperforms obviously competitive approaches.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“With regard to fault diagnosis, Tong et al. [420,421] employed JDA to complete the diagnosis tasks of bearings respectively used in the motor and the belt conveyor idler, and achieve better diagnosis accuracy than TCA-based diagnosis models.”
From Applications of machine learning to machine fault diagnosis: A review and roadmap (2020) · cites this paper as [421]
Citations
Cites
(2008) · Journal of Machine Learning Research · Cited by 33,051
Pan, S. J., & Yang, Q. (2010) · IEEE Transactions on Knowledge and Data Engineering · doi:10.1109/tkde.2009.191 · Cited by 23,387 · cited 2×
“DA can be considered as particular setting of transfer learning [17,18] which aims to leverage the knowledge learnt from a training domain to use in a different but related test domain by reducing distribution differences [18,19].”
BackgroundNonlinear Dimensionality Reduction by Locally Linear Embedding
Roweis, S. T., & Saul, L. K. (2000) · Science · doi:10.1126/science.290.5500.2323 · Cited by 14,965 · cited 1×
“Then reducing the dimensions is conducted for the sake of computational efficiency, such as principal component analysis(PCA) [11], locally linear embedding(LLE) [12] and linear discriminant analysis(LDA) [13].”
MethodDomain Adaptation via Transfer Component Analysis
Pan, S. J., Tsang, I. W., Kwok, J. T., & Yang, Q. (2011) · IEEE Transactions on Neural Networks · doi:10.1109/tnn.2010.2091281 · Cited by 4,753 · cited 1×
“DA can be considered as particular setting of transfer learning [17,18] which aims to leverage the knowledge learnt from a training domain to use in a different but related test domain by reducing distribution differences [18,19].”
BackgroundText classification from labeled and unlabeled documents using EM
Nigam, K., Mccallum, A. K., Thrun, S., & Mitchell, T. (2000) · Machine Learning · doi:10.1023/a:1007692713085 · Cited by 2,736
Transfer Feature Learning with Joint Distribution Adaptation
Long, M., Wang, J., Ding, G., Sun, J., & Yu, P. S. (2013) · 2013 IEEE International Conference on Computer Vision · doi:10.1109/iccv.2013.274 · Cited by 2,071 · cited 4×
“test domains, respectively. Similarly let P(Y trjX tr) and Q(Y tejX te) be the conditional distributions of X tr = fx tr i gand X te = fx te i gfrom the training domain and test domain, respectively [20,25,26]. In this literature, we focus on the following settings: 1)one training domain and one test domain share the…”
BackgroundInfluentialZhang, W., Peng, G., Li, C., Chen, Y., & Zhang, Z. (2017) · Sensors · doi:10.3390/s17020425 · Cited by 1,925
Improving predictive inference under covariate shift by weighting the log-likelihood function
Shimodaira, H. (2000) · Journal of Statistical Planning and Inference · doi:10.1016/s0378-3758(00)00115-4 · Cited by 1,678
Unsupervised Visual Domain Adaptation Using Subspace Alignment
Fernando, B., Habrard, A., Sebban, M., & Tuytelaars, T. (2013) · 2013 IEEE International Conference on Computer Vision · doi:10.1109/iccv.2013.368 · Cited by 1,314 · cited 1×
“ation extracted from original input by PCA without domain adaptation. c. NN SA: NN classier with projection and domain adaptation using subspace alignment that only reduces the marginal distribution [28]. a is a baseline method without projection and domain adaptation techniques, which is widely used in the eld of fau…”
MethodDomain adaptation for object recognition: An unsupervised approach
Gopalan, R., Li, R., & Chellappa, R. (2011) · 2011 International Conference on Computer Vision · doi:10.1109/iccv.2011.6126344 · Cited by 1,053 · cited 1×
“.1 Domain adaptation DA as one research of transfer learning aims at making full use of information coming from both training domain and test domain during the learning process to adapt automatically [18,19,23]. Generally domain is considered as consisting of a feature space of inputs Xand a probability distribution o…”
Background
Research works printed but not linked: 1
- CsurkaG. Domain adaptation for visual applications: a comprehensive survey CoRR abs/1702.05374 2017. · arXiv
Cited by
Applications of machine learning to machine fault diagnosis: A review and roadmap
Lei, Y., Yang, B., Jiang, X., Jia, F., Li, N., & Nandi, A. K. (2020) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2019.106587 · Cited by 2,997
Li, W., Huang, R., Li, J., Liao, Y., Chen, Z., He, G., Yan, R., & Gryllias, K. (2022) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2021.108487 · Cited by 816
Self-citationZhao, Z., Zhang, Q., Yu, X., Sun, C., Wang, S., Yan, R., & Chen, X. (2021) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2021.3116309 · Cited by 526
“Tong et al. [86], [87] reduced marginal and conditional distributions simultaneously across domains based on MMD in the feature space by refining pseudo test labels for bearing fault diagnosis.”
BackgroundKnowledge Transfer for Rotary Machine Fault Diagnosis
Yan, R., Shen, F., Sun, C., & Chen, X. (2020) · IEEE Sensors Journal · doi:10.1109/jsen.2019.2949057 · Cited by 245
“Tong et al. [162] proposed a domain adaptation using trans-ferable features (DATF), where difference of marginal and conditional distributions was reduced simultaneously across domains based on maximum mean discrepancy (MMD) in feature space by refining pseudo test labels.”
BackgroundMethodFault diagnosis in rotating machines based on transfer learning: Literature review
Misbah, I., LEE, C. K. M., & KEUNG, K. L. (2024) · Knowledge-Based Systems · doi:10.1016/j.knosys.2023.111158 · Cited by 215
Cross-Domain Fault Diagnosis Using Knowledge Transfer Strategy: A Review
Zheng, H., Wang, R., Yang, Y., Yin, J., Li, Y., Li, Y., & Xu, M. (2019) · IEEE Access · doi:10.1109/access.2019.2939876 · Cited by 209
Rotating machinery fault detection and diagnosis based on deep domain adaptation: A survey
Zhang, S., Su, L., Gu, J., Li, K., Zhou, L., & PECHT, M. G. (2021) · Chinese Journal of Aeronautics · doi:10.1016/j.cja.2021.10.006 · Cited by 162
Li, J., Li, X., He, D., & Qu, Y. (2020) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-020-01543-8 · Cited by 72
Kim, H., & Youn, B. D. (2019) · IEEE Access · doi:10.1109/access.2019.2906273 · Cited by 68
“Many other studies [19]–[28] have also performed vibration-based fault diagnosis studies with domain adaptation.”
BackgroundData-driven fault diagnosis for heterogeneous chillers using domain adaptation techniques
van de Sand, R., Corasaniti, S., & Reiff-Stephan, J. (2021) · Control Engineering Practice · doi:10.1016/j.conengprac.2021.104815 · Cited by 57
Zhang, Y., Liu, W., Wang, X., & Shaheer, M. A. (2022) · Expert Systems with Applications · doi:10.1016/j.eswa.2022.117473 · Cited by 36
A novel multi-adversarial cross-domain neural network for bearing fault diagnosis
Jin, G., Xu, K., Chen, H., Jin, Y., & Zhu, C. (2021) · Measurement Science and Technology · doi:10.1088/1361-6501/abd900 · Cited by 35
Lu, G., Wen, X., He, G., Yi, X., & Yan, P. (2021) · IEEE/ASME Transactions on Mechatronics · doi:10.1109/tmech.2021.3110988 · Cited by 36
An, J., Ai, P., & Liu, D. (2020) · Shock and Vibration · doi:10.1155/2020/4676701 · Cited by 37
“[31] proposed a bearing fault diagnosis domain adaptation method to find transferable features across domains, which were obtained by reducing marginal and conditional distributions simultaneously based on MMD.”
MethodTransfer learning for bearing performance degradation assessment based on deep hierarchical features
Dong, S., Wen, G., Lei, Z., & Zhang, Z. (2020) · ISA Transactions · doi:10.1016/j.isatra.2020.09.004 · Cited by 34
Unsupervised Joint Subdomain Adaptation Network for Fault Diagnosis
Wang, B., Wei, Y., Liu, S., Zhao, D., & Liu, X. (2022) · IEEE Sensors Journal · doi:10.1109/jsen.2022.3163425 · Cited by 32
Application of Rotating Machinery Fault Diagnosis Based on Deep Learning
Cui, W., Meng, G., Wang, A., Zhang, X., & Ding, J. (2021) · Shock and Vibration · doi:10.1155/2021/3083190 · Cited by 35
Xin, Y., Du, T., Liu, T., Sun, P., Zhu, M., Zheng, L., Du, H., Zou, Y., & Xu, M. (2023) · Sensors and Actuators A Physical · doi:10.1016/j.sna.2023.114664 · Cited by 29
Shao, Y., Yuan, X., Zhang, C., Song, Y., & Xu, Q. (2020) · Applied Sciences · doi:10.3390/app10124303 · Cited by 28
“Wavelet packet transformation (WPT) [6], empirical mode decomposition (EMD) [7] and fast Fourier transformation (FFT) [8] are three kinds of widely applied feature extraction methods in the vibration signal processing field.”
MethodBeyond federated learning: On confidentiality-critical machine learning applications in industry
Zellinger, W., Wieser, V., Kumar, M., Brunner, D. J., Shepeleva, N., Gálvez, R., Langer, J., Fischer, L., & Moser, B. (2021) · Procedia Computer Science · doi:10.1016/j.procs.2021.01.296 · Cited by 29
Braig, M., & Zeiler, P. (2022) · IEEE Access · doi:10.1109/access.2022.3233220 · Cited by 24
“, balanced distribution adaptation for condition diagnosis, can be found in [189], [190], [191], and [192] on bearings, [193] on bearings and gearboxes, [194] additionally on wind turbines, and [195] on structures.”
BackgroundClassifying Multivariate Signals in Rolling Bearing Fault Detection Using Adaptive Wide-Kernel CNNs
van den Hoogen, J., Bloemheuvel, S., & Atzmueller, M. (2021) · Applied Sciences · doi:10.3390/app112311429 · Cited by 21
“Features in the frequency-domain are calculated after transforming the time series to the frequency spectrum using the FFT algorithm that computes the one-dimensional discrete Fourier transform (DFT) with backward normalization, which is known as a potent baseline [10,45,59].”
MethodZhang, Y., Ren, Z., & Zhou, S. (2020) · Shock and Vibration · doi:10.1155/2020/8850976 · Cited by 24
“A domain adaptation bearing fault diagnosis method was proposed in [24] by fast Fourier transformation of the original signal.”
MethodLiu, W., Ren, H., Shaheer, M. A., & Awan, J. A. (2021) · International Journal of Precision Engineering and Manufacturing-Green Technology · doi:10.1007/s40684-020-00293-5 · Cited by 20
Dong, J., Su, D., Gao, Y., Wu, X., Jiang, H., & Chen, T. (2023) · Measurement Science and Technology · doi:10.1088/1361-6501/acc04a · Cited by 19
“Tong et al [31] improved the model DA by reducing the maximum mean difference (MMD) between the target domain and the source domain, and Yang et al [32] further improved the model performance on the target domain by a polynomial kernel-guided MMD approach.”
Ball Screw Fault Diagnosis Based on Wavelet Convolution Transfer Learning
Xie, Y., Liu, C., Huang, L., & Duan, H. (2022) · Sensors · doi:10.3390/s22166270 · Cited by 18
“[9] proposed a domain adaptation method with transferable features, using the maximum mean difference (MMD) to reduce the difference between the source domain and the target domain, and then realize the bearing fault diagnosis; Zhang et al.”
MethodAn Improved Wide-Kernel CNN for Classifying Multivariate Signals in Fault Diagnosis
van den Hoogen, J., Bloemheuvel, S., & Atzmueller, M. (2020) · IEEE ... International Conference on Data Mining workshops · doi:10.1109/icdmw51313.2020.00046 · Cited by 20
“This sequence length is widely used in previous studies for efficient implementation of the FFT algorithm that is known as a robust baseline [11], [28], [37].”
MethodZhou, K., Cao, G., Zhang, K., & Liu, J. (2021) · Measurement Science and Technology · doi:10.1088/1361-6501/abeddd · Cited by 17
“Tong et al constructed the nearest neighbor classifier for bearing fault diagnosis based on the extracted transferable features [23].”
Kim, T.-W., Oh, J., Min, C.-H., Hwang, S.-Y., Kim, M., & Lee, J.-H. (2021) · Sensors · doi:10.3390/s21020457 · Cited by 14
Demetgül, M., Zheng, Q., Tansel, I., & Fleischer, J. (2023) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-023-12060-2 · Cited by 13
“Various anomaly detection techniques have been proposed in literature, including those based on feature selection [10-12], signal similarity [13], probability distribution [14], and forecasting [15].”
MethodDong, S., Wen, G., & Zhang, Z. (2019) · IEEE International Instrumentation and Measurement Technology Conference · doi:10.1109/i2mtc.2019.8826993 · Cited by 13
“Transferable Features are extracted from spectrum of raw vibration signals for bearing fault diagnosis under different working conditions [14].”
BackgroundWang, J., Wang, Y., Yu, J., Li, Q., Wang, H., & Zhou, X. (2025) · Sensors · doi:10.3390/s25123789 · Cited by 12
Nan, Y., Peize, C., Zhang, L., & Wang, J. (2021) · Journal of Mechanical Engineering · doi:10.3901/jme.2021.15.080 · Cited by 12
On the application of transfer learning in prognostics and health management
Moradi, R., & Groth, K. M. (2020) · Annual Conference of the PHM Society · doi:10.36001/phmconf.2020.v12i1.1300 · Cited by 12
Liu, W. Y., & Ren, H. (2020) · International Journal of Energy Research · doi:10.1002/er.5560 · Cited by 11
“Tong et al18 optimized the pseudolabels obtained from the K-nearest neighbor (KNN) classification on the training data to enhance the identifiable information in the original vibration signal, and obtain the robust transferable feature representation after multiple iterations.”
Methodvan den Hoogen, J., Hudson, D., Bloemheuvel, S., & Atzmueller, M. (2023) · International Journal of Data Science and Analytics · doi:10.1007/s41060-023-00440-6 · Cited by 12
Gituku, E. W., Kimotho, J. K., & Njiri, J. G. (2020) · Engineering Reports · doi:10.1002/eng2.12307 · Cited by 9
Zhang, J., & Wu, J. (2021) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2021.3107046 · Cited by 8
Deep Active Transfer Learning for Cross-Domain Fault Diagnosis With Limited Samples
Chen, C., Lu, H., Wang, H., Zhang, L., & Fan, W. (2025) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2025.3554866 · Cited by 9
“…some researchers explore the alignment of joint probability distribution by adding conditional distribution into DA, for instance, Tong et al. [19] refined the pseudo test labels and simultaneously reduced the joint probability distribution across domains using maximum mean discrepancy (MMD)…”
Kang, S., Chen, W., Wang, Y., Na, X., Wang, Q., & Микулович, В. И. (2019) · IET Science Measurement & Technology · doi:10.1049/iet-smt.2019.0043 · Cited by 7
Intelligent Fault Diagnosis of Rolling Bearing Based on Deep Transfer Learning
Fang, L., Liu, Y., Li, X., & Chang, J. (2024) · doi:10.1109/icnlp60986.2024.10692521 · Cited by 6
Du, Z., Liu, D., & Cui, L. (2024) · IEEE Sensors Journal · doi:10.1109/jsen.2024.3517597 · Cited by 6
“Tong et al. [21] presented a domain-adaptive model, which utilized maximum mean discrepancy (MMD) to attain a resilient transferable feature representation.”
Ma, T., Qing, Z., Du, F., & Liu, J. (2019) · Shock and Vibration · doi:10.1155/2019/8239198 · Cited by 6
“At the same time, EMD can accurately obtain the global amplitude distribution of each frequency [23, 24].”
BackgroundDavoodabadi, A., Behzad, M., Arghand, H. A., Mohammadi, S., & Gelman, L. (2025) · Machines · doi:10.3390/machines13050351 · Cited by 5
Novel Fault Diagnosis Approach for Rolling-element Bearings Based on Bispectral Analysis
Zhang, R., Wang, K., Wu, L., & Gao, H. (2022) · Sensors and Materials · doi:10.18494/sam3636 · Cited by 5
A domain adaptation bearing fault diagnosis method with strong noise resistance
Zhang, L. F., Wei, Z., Zheng, Y., Liu, S., Geng, F., Liu, X., & Dong, Z. (2025) · Transactions of the Institute of Measurement and Control · doi:10.1177/01423312251376706 · Cited by 4
“The first is the statistics-based method, which uses methods such as the maximum mean discrepancy (MMD) (Tong et al., 2018) and the Wasserstein distance (Zhao et al., 2023; Wang et al., 2024c) to measure the data distribution differences between different domains.”
Hwang, S.-Y., Kim, K.-S., Kim, H., Jun, H.-B., & Lee, J.-H. (2021) · Applied Sciences · doi:10.3390/app11093780 · Cited by 4
Zhang, K., Cao, G., Zhou, K., & Liu, J. (2020) · Prognostics and System Health Management Conference · doi:10.1109/phm-jinan48558.2020.00044 · Cited by 4
“Tong et al. [8] proposed an improved gearbox fault diagnosis approach based on the domain adaptation of migratable features, and it can realize fault diagnosis of rotary machinery under different working conditions.”
Rolling Bearing Fault Diagnosis by Aperiodic Stochastic Resonance Under Variable Speed Conditions
Zhuang, X., Yang, C., Yang, J., Wu, C., Shan, Z., & Gong, T. (2021) · Fluctuation and Noise Letters · doi:10.1142/s0219477522500158 · Cited by 4
Yu, S., Wang, F., Yu, C., & Tian, H. (2025) · Smart and Resilient Transport · doi:10.1108/srt-11-2024-0017 · Cited by 3
Fault Diagnosis of Rolling Bearing Based on BP Nural Network Technology
Tang, J., Liang, X., Huang, M. Y., & Gong, Z. (2021) · International Conference on Computer Science and Network Technology (ICCSNT) · doi:10.1109/iccsnt53786.2021.9615469 · Cited by 3
Alam, T. E., Ahsan, M. M., & Raman, S. (2025) · arXiv (Cornell University) · doi:10.48550/arxiv.2508.07536 · Cited by 3
Adversarial Domain Adaptation for Gear Crack Level Classification Under Variable Load
Wei, D., Han, T., Chu, F., & Zuo, M. J. (2020) · Asia-Pacific International Symposium on Advanced Reliability and Maintenance Modeling (APARM) · doi:10.1109/aparm49247.2020.9209356 · Cited by 2
Ma, H., Zuo, D., Zhang, G., Wang, Q., & Kong, X. (2026) · Measurement Science and Technology · doi:10.1088/1361-6501/ae6523 · Cited by 1
Zhuang, J., 麦明辉, Huang, J., Ding, L., & Liang, Z. (2026) · Journal of Vibration and Control · doi:10.1177/10775463261459149 · Cited by 1
MSOTL: Multi-source online transfer learning-enabled performance degradation assessment of machinery
Su, Y., Lei, Z., & Wen, G. (2024) · Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture · doi:10.1177/09544054241302666 · Cited by 1
“18 To reduce distribution shifts, distribution adaptation and manifold alignment method is used to detect cross-domain faults.”
Fabrication and Characterization of d33 Mode (1-x)Pb(Mg1/3Nb2/3)O3-xPbTiO3 (PMN-PT) Energy Harvester
(2014) · Sensors and Materials · doi:10.18494/sam.2014.1001
Domain Generalization Model of Deep Convolutional Networks Based on SAND-Mask
Wang, J., Chen, L., & Wang, R. (2022) · Algorithms · doi:10.3390/a15060215 · Cited by 1
da Silva, K. A. J., Silva, A., de Azevedo, M. T., & Silles, F. S. (2023) · CONTECSI - International Conference on Information Systems and Technology Management · doi:10.5748/19contecsi/pse/dsc/7132
Fault diagnosis models based on cross channel field transfer
Yan, R., & Shen, F. (2024) · Elsevier eBooks · doi:10.1016/b978-0-323-99989-2.00004-9
Performance Degradation Assessment Based on Transfer Learning for Bearing
Wen, G., Lei, Z., Chen, X., & Huang, X. (2024) · Smart sensors, measurement and instrumentation · doi:10.1007/978-981-97-1176-5_5
Xi, H., Zhang, D., Liu, X., Hao, J., Li, Z., & Zhang, Y. (2026) · International Journal of Computational Intelligence Systems · doi:10.1007/s44196-026-01449-y
Mlamsan-based cross-case fault diagnosis of rotor-bearing systems
Han, Z., Fan, Y., Wang, Y., Jiang, X., & Dong, R. (2026) · Engineering Research Express · doi:10.1088/2631-8695/ae8f01
“For instance, Tong et al [7] proposed a domain adaptation method with transferable features for bearing fault diagnosis under different working conditions, which reduces the discrepancy between the source and target domains by searching for cross-domain transferable features.”
Intelligent fault diagnosis of rotating machines using transfer learning
Iqbal, M. (n.d.) · PolyU Institutional Research Archive (Hong Kong Polytechnic University)
Hou, Z., Wang, Y., Huang, L., & Ma, S. (2026) · Shock and Vibration · doi:10.1155/vib/4877872
Zaidi, S. I. H., Shenfield, A., Zhang, H., & Ikpehai, A. (2026) · Machine Learning and Knowledge Extraction · doi:10.3390/make8110348
Metadata
- Authors
- Tong, Z., Li, W., Zhang, B., & Zhang, M.
- Affiliations
- China University of Mining and Technology (CN)
- Corresponding author
- Zhang, Bo
- Venue
- Shock and Vibration
- Publisher
- Wiley
- Published
- 2018-01
- Volume
- 2018
- Issue
- 1
- ISSN
- 1070-9622 (ISSN-L)
- 1875-9203
- OpenAlex
- W2963532361
- Cited by
- 64
- References
- 31
- Citations by year
- 2026: 6 · 2025: 5 · 2024: 5 · 2023: 6 · 2022: 6 · 2021: 17 · 2020: 12 · 2019: 6
- FWCI
- 5.42
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Locations
- Shock and Vibration (publishedVersion, cc-by)
- arXiv (Cornell University) (submittedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion)
- arXiv (Cornell University)
- Funders
- National Natural Science Foundation of China (51475455)
- Natural Science Foundation of Jiangsu Province (BK20160276)
- Topics
- Physical Sciences › Engineering › Control and Systems Engineering › Machine Fault Diagnosis Techniques
- Physical Sciences › Engineering › Control and Systems Engineering › Fault Detection and Control Systems
- Physical Sciences › Engineering › Mechanical Engineering › Gear and Bearing Dynamics Analysis
- Keywords
- bearing fault diagnosis, domain adaptation, transferable features, variable operating conditions, vibration signals, maximum mean discrepancy, pseudo-label refinement, nearest neighbor classification, rotating machinery
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.