A Review of Artificial Intelligence Methods for Condition Monitoring and Fault Diagnosis of Rolling Element Bearings for Induction Motor
Open accessThe DOI matches its Crossref record; 235 of the 235 references it cites were found in a registry or an index.
Abstract
The fault detection and diagnosis (FDD) along with condition monitoring (CM) and of rotating machinery (RM) have critical importance for early diagnosis to prevent severe damage of infrastructure in industrial environments. Importantly, valuable industrial equipment needs continuous monitoring to enhance the safety, reliability, and availability and to decrease the cost of maintenance of modern industrial systems and applications. However, induction motor (IM) has been extensively used in several industrial processes because it is cheap, reliable, and robust. Rolling bearings are considered to be the main component of IM. Undoubtedly, any failure of this basic component can lead to a serious breakdown of IM and for whole industrial system. Thus, many current methods based on different techniques are employed as a fault prognosis and diagnosis of rolling elements bearing of IM. Moreover, these techniques include signal/image processing, intelligent diagnostics, data fusion, data mining, and expert systems for time and frequency as well as time-frequency domains. Artificial intelligence (AI) techniques have proven their significance in every field of digital technology. Industrial machines, automation, and processes are the net frontiers of AI adaptation. There are quite developed literatures that have been approaching the issues using signals and data processing techniques. However, the key contribution of this work is to present an extensive review of CM and FDD of the IM, especially for rolling elements bearings, based on artificial intelligent (AI) methods. This study highlights the advantages and performance limitations of each method. Finally, challenges and future trends are also highlighted.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“One of the reasons why SVM is widely applied in vibration analysis for machine diagnosis is due to its compatibility with large and complex datasets such as data collected in the manufacturing industry [129].”
From Vibration Analysis for Machine Monitoring and Diagnosis: A Systematic Review (2021) · cites this paper as [129]
Citations
Cites
Gao, Z., Cecati, C., & Ding, S. X. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2015.2417501 · Cited by 3,135
Deep learning and its applications to machine health monitoring
Zhao, R., Yan, R., Chen, Z., Mao, K., Wang, P., & Gao, R. X. (2019) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2018.05.050 · Cited by 2,894
Rolling element bearing diagnostics—A tutorial
Randall, R. B., & Antoni, J. (2011) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2010.07.017 · Cited by 2,744
Machinery health prognostics: A systematic review from data acquisition to RUL prediction
Lei, Y., Li, N., Guo, L., Li, N., Yan, T., & Lin, J. (2018) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2017.11.016 · Cited by 2,634 · cited 1×
“However, this field still faces many challenges [35, 230, 231]. section summarizes the challenges and the future trends of AI methods in CM and FDD of rolling element bearings for IM [232–235”
BackgroundCondition Monitoring and Fault Diagnosis of Electrical Motors—A Review
Nandi, S., Toliyat, H. A., & Li, X. (2005) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2005.847955 · Cited by 2,382
A new convolutional neural network-based data-driven fault diagnosis method
Wen, L., Li, X., Gao, L., & Zhang, Y. (2018) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2774777 · Cited by 2,222 · cited 1×
“In [219], a new CNN based on the LeNet-5 FDD method is proposed for bearings using vibration signals.”
MethodArtificial intelligence for fault diagnosis of rotating machinery: A review
Liu, R., Yang, B., Zio, E., & Chen, X. (2018) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2018.02.016 · Cited by 2,188 · cited 1×
“Intelligent CM and FDDmethod is considered to be as a key factor of fault diagnosis development [43, 229].”
BackgroundJia, F., Lei, Y., Lin, J., Zhou, X., & Lu, N. (2016) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2015.10.025 · Cited by 1,710 · cited 1×
“In [212], an intelligent FDD of bearings and gearboxes based on deep neural networks tool with massive vibration data is introduced.”
MethodSuthaharan, S. (2016) · Integrated Series in Information Systems · doi:10.1007/978-1-4899-7641-3_9 · Cited by 1,579
Convolutional Neural Network Based Fault Detection for Rotating Machinery
Janssens, O., Slavkovikj, V., Vervisch, B., Stockman, K., Loccufier, M., Verstockt, S., Van de Walle, R., & Van Hoecke, S. (2016) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2016.05.027 · Cited by 1,255 · cited 1×
“In [215], a feature learning model for CM and FDD of the bearing based on convolutional neural networks using vibration signals is proposed.”
Method
Research works printed but not linked: 1
- 10.1109/jsen.2020.29707478307-8315 · doi:10.1109/jsen.2020.29707478307-8315
Cited by
Items 201–224 of 224
Generic Smart Rotor Fault Diagnosis Model with Normalised Vibration Parameters
Sepulveda, N. F. E., & Sinha, J. (2024) · Lecture notes in mechanical engineering · doi:10.1007/978-3-031-39619-9_56
Wu, Y., Wang, J., & Yang, J. (2024) · Lecture notes in electrical engineering · doi:10.1007/978-981-99-9315-4_36
Bearing Fault Diagnosis Based on IPOA-VMD and SSA-HKELM
Chang, B., Zhao, X., Guo, D., Zhao, S., Fei, J., Li, H., & Liu, X. (2024) · IEEE Access · doi:10.1109/access.2024.3515479
Zhang, X., Cao, X., Zhao, J., Duan, Y., Yang, X., Zhao, F., Li, X., & Fan, H. (2024) · Global Reliability and Prognostics and Health Management Conference (PHM) · doi:10.1109/phm-beijing63284.2024.10874483
Automatic electrical fault detection method for power supply and distribution based on fuzzy C-mean
Wang, X. (2025) · International Conference on Physics, Photonics, and Optical Engineering (ICPPOE) · doi:10.1117/12.3059896
Feature map field fusion of guided wave vibrometer data for increased fault localization capability
Dworakowski, Z., Kowalczyk, K., & Dziendzikowski, M. (2025) · Structural Health Monitoring · doi:10.1177/14759217251324910
Intelligent motor fault diagnosis based on deep learning
Xie, Y., Chen, Q., & Shi, J. (2025) · International Journal of Information and Communication Technology · doi:10.1504/ijict.2025.145829
Placement for Condition Monitoring of Rotating Machine Elements Based on HSD
Karyatanti, I. D. P., & Ramadhan, M. H. (2025) · JEEE-U (Journal of Electrical and Electronic Engineering-UMSIDA) · doi:10.21070/jeeeu.v9i1.1703
Ji, M., Chen, L., Yao, Y., Wang, X., Chang, C., & Zhou, Y. (2025) · Shock and Vibration · doi:10.1155/vib/5237376
MuthuKumaran, M., S., R., Shamna, B., Suryavadhani, D., & Hariraj, R. (2025) · International Conference on Trends in Electronics and Informatics (ICOEI) · doi:10.1109/icoei65986.2025.11013044
“This type of predictive maintenance provides greater accuracy in scheduling maintenance work, extend the lifespan of the equipment, and reduce operating cost [8].”
IMPROVING THE OPERATIONAL RELIABILITY OF A FRANCIS TURBINE EQUIPPED WITH AN ONLINE MONITORING SYSTEM
Palchenko, O. (2025) · Municipal economy of cities · doi:10.33042/3083-6727-2025-4-192-332-342
Prediction of the Remaining Lifespan of Planetary Gearboxes Using Physics-Informed Neural Networks
Jáuregui-Correa, J. C., Basaldua-Sanchez, J., Santana, J. D. J., & Ceccarelli, M. (2025) · Mechanisms and machine science · doi:10.1007/978-3-032-10862-3_10
Wang, C., & Wang, Y. (2025) · International Conference on Equipment Intelligent Operation and Maintenance (ICEIOM) · doi:10.1109/iceiom65271.2025.11239977
“Consequently, developing reliable fault diagnosis methods has become essential for ensuring operational safety, reducing maintenance costs, and extending equipment lifespan [2].”
Develop an integrated piezoelectric transducer within a bearing housing for bearing fault detection
Badpa, P. (2024) · Mspace (University of Manitoba)
Exploring Integration of Surrogate Models Through a Case Study on Variable Frequency Drives
Šturek, D., & Lazarova‐Molnar, S. (2025) · Winter Simulation Conference · doi:10.1109/wsc68292.2025.11338924
“…simulations, have been the focus of research exploring the use of DL. Approaches in this area primarily target condition monitoring or detection and diagnostics of electrical or mechanical faults in stator, rotor and bearings (Zhang et al. 2020; Gangsnar and Tiwari 2020; AlShorman et al. 2020).”
AI-Driven Predictive Maintenance in Industrial IoT Systems: A Comprehensive Review
Gobinath, A., Rajeswari, P., Andal, L., Anandan, M., Suresh Kumar, N., & Pavithra Devi, R. (2026) · International Conference on Electronics, Materials Engineering & Nano-Technology (IEMENTech) · doi:10.1109/iementech202669403.2026.11434097
“Alshorman et al. [8] present a system using large data that addresses issues in data management for maintenance prediction.”
Galli, F. (2024) · theses.fr (ABES) · doi:10.70675/97c77627zc51bz4cb0za02bzf5547129624d · Cited by 1
Recent trends on bearing faults diagnosis of IM using vibration signal: a critical review
Yadav, O. P., Joshi, D., & Chauhan, R. K. (2026) · Sadhana · doi:10.1007/s12046-026-03235-0
Sehri, M., & Yan, T. (2026) · IEEE Sensors Journal · doi:10.1109/jsen.2026.3733586
Bi, Z., & Sun, C. (2026) · International Conference on Data-driven Optimization of Complex Systems (DOCS) · doi:10.1109/docs70981.2026.11698599
Ali, A. H. (2024) · International Journal of Intelligent Systems and Applications in Engineering
Early Failure Detection of Rapier Weaving Loom Using Sensors and Machine Learning Approach
Gundale, D. V. A. M. A. S. (2022) · Mathematical Statistician and Engineering Applications
Dey, S., Ray, K., Barman, A., Das, D., & Sahoo, S. (2026) · International Conference on Intelligent Computing and Sustainable Innovations in Technology (IC-SIT) · doi:10.1109/ic-sit69723.2026.11735776
“One of the most promising renewable energy sources for sustainable electricity generation globally has been wind energy [1].”
Metadata
- Authors
- AlShorman, O., Irfan, M., Saad, N., Zhen, D., Haider, N., Glowacz, A., & AlShorman, A.
- Affiliations
- Najran University (SA)
- Universiti Teknologi Petronas (MY)
- Hebei University of Technology (CN)
- Victoria University (AU)
- Department of Automatic Control and Robotics, AGH University of Science and Technology, 30-059 Kraków, Poland
- Jordan University of Science and Technology (JO)
- Corresponding author
- AlShorman, Omar
- Venue
- Shock and Vibration
- Publisher
- Wiley
- Published
- 2020-11-04
- Volume
- 2020
- Pages
- 1-20
- ISSN
- 1070-9622 (ISSN-L)
- 1875-9203
- OpenAlex
- W3096153045
- Cited by
- 215
- References
- 235
- Citations by year
- 2026: 6 · 2025: 46 · 2024: 47 · 2023: 51 · 2022: 42 · 2021: 21 · 2020: 2
- FWCI
- 14.35
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Locations
- Shock and Vibration (publishedVersion, cc-by)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Greater South Information System
- Topics
- Physical Sciences › Engineering › Control and Systems Engineering › Machine Fault Diagnosis Techniques
- Physical Sciences › Engineering › Control and Systems Engineering › Fault Detection and Control Systems
- Physical Sciences › Engineering › Mechanical Engineering › Gear and Bearing Dynamics Analysis
- Keywords
- rolling bearings, induction motor, condition monitoring, fault diagnosis, fault detection and diagnosis, artificial intelligence, rotating machinery, time-frequency analysis, data fusion, expert systems, maintenance cost reduction
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.