CoChat

Comparative Numerical Analysis between Two Types of Orthodontic Wire for the Lingual Technique, Using the Finite Element Method

Open access

The DOI matches its Crossref record; 26 of the 26 references it cites were found in a registry or an index.

Abstract

In the lingual orthodontic technique, there are two paradigms regarding the type of wire used. Regardless of the material or gauge, some orthodontists choose to use the straight wire and resin and bond it to the surface of the tooth; they call it compensations. Other orthodontists prefer to bend the wire, giving it a mushroom shape. There is no specific indication for the use of each type of wire, so orthodontists use them according to their criteria. The present study establishes the bases so that it is possible to find the indications for each type of wire. A clinical trial of a lingual orthodontic patient was used. To carry out the comparative study, a straight arch was placed in his right arch and a mushroom arch in the left arch. Using 3D imaging, a high-biofidelity biomodel of the patient’s mandible was generated, with which the FEM analysis was performed, which allowed comparing the reactions of the mandibular bone and appliances with the different arches. It was found that, on the side with the straight arch, there were greater deformations, and in the mushroom arch, there were greater stresses. With this, it is possible to find which clinical cases in each type of wire are indicated.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1155/2021/6658039

Cites

26 of 26 references verified0 citation errors · 0 not checkable

Statistics

Figures

Figure 1 Contributions of orthodontics to better prosthetic treatments. Orthodontics verticalizes the position of the inclined teeth that will serve as pillars for the prosthesis, improving its support.
Figure 1 Contributions of orthodontics to better prosthetic treatments. Orthodontics verticalizes the position of the inclined teeth that will serve as pillars for the prosthesis, improving its support.CC BY · PubMed Central
Figure 2 Standardized arches for the lingual technique: (a) mushroom shape and (b) straight. The choice of the type of arch is according to the criteria and experience of the orthodontist.
Figure 2 Standardized arches for the lingual technique: (a) mushroom shape and (b) straight. The choice of the type of arch is according to the criteria and experience of the orthodontist.CC BY · PubMed Central
Figure 3 Mechanotransduction of the bone by the action of orthodontic forces. When the orthodontic forces produce the movement of the dental organ, on the side towards which these forces are directed, they cause the osteoclasts to activate, producing osteolysis of the bone. In the same way, on the opposite side, the osteoblasts are activated, producing bone osteogenesis.
Figure 3 Mechanotransduction of the bone by the action of orthodontic forces. When the orthodontic forces produce the movement of the dental organ, on the side towards which these forces are directed, they cause the osteoclasts to activate, producing osteolysis of the bone. In the same way, on the opposite side, the osteoblasts are activated, producing bone osteogenesis.CC BY · PubMed Central
Figure 4 Finite elements of low biofidelity models. The low biofidelity of the biomodels causes the results to be far from those obtained in reality.
Figure 4 Finite elements of low biofidelity models. The low biofidelity of the biomodels causes the results to be far from those obtained in reality.CC BY · PubMed Central
Figure 5 First biomodels of dental organs.
Figure 5 First biomodels of dental organs.CC BY · PubMed Central
Figure 6 Radiographic study (cranial lateral radiography and orthopantomography) and cephalometry (Ricketts analysis, Jarabak analysis, and soft profile analysis) of the patient, necessary for the diagnosis of the patient.
Figure 6 Radiographic study (cranial lateral radiography and orthopantomography) and cephalometry (Ricketts analysis, Jarabak analysis, and soft profile analysis) of the patient, necessary for the diagnosis of the patient.CC BY · PubMed Central
Figure 7 High-biofidelity biomodel of the patient, generated from the latest generation tomography, necessary to perform the numerical analysis.
Figure 7 High-biofidelity biomodel of the patient, generated from the latest generation tomography, necessary to perform the numerical analysis.CC BY · PubMed Central
Figure 8 Discretization of the patient's biomodel with brackets and wires in place, prior to performing the numerical analysis.
Figure 8 Discretization of the patient's biomodel with brackets and wires in place, prior to performing the numerical analysis.CC BY · PubMed Central
Figure 9 Boundary conditions and forces applied to the wire according to their actual application to brackets and teeth. The red arrows indicate the direction of the forces generated in the wire, in each dental organ.
Figure 9 Boundary conditions and forces applied to the wire according to their actual application to brackets and teeth. The red arrows indicate the direction of the forces generated in the wire, in each dental organ.CC BY · PubMed Central
Figure 10 Total deformation occurring in the complete system (mandibular bone, dental organs, brackets, and wires). The red marker indicates the maximum deformations, and the blue marker indicates the minor deformations.
Figure 10 Total deformation occurring in the complete system (mandibular bone, dental organs, brackets, and wires). The red marker indicates the maximum deformations, and the blue marker indicates the minor deformations.CC BY · PubMed Central
Figure 11 Total deformation that occurs in the mandibular bone. The red marker indicates the maximum deformations, and the blue marker indicates the minor deformations.
Figure 11 Total deformation that occurs in the mandibular bone. The red marker indicates the maximum deformations, and the blue marker indicates the minor deformations.CC BY · PubMed Central
Figure 12 Total deformation that occurs in the wire. The red marker indicates the maximum deformations, and the blue marker indicates the minor deformations.
Figure 12 Total deformation that occurs in the wire. The red marker indicates the maximum deformations, and the blue marker indicates the minor deformations.CC BY · PubMed Central
Figure 13 Normal stresses in the X complete system (mandibular bone, dental organs, brackets, and wires). The red marker indicates the maximum stresses, and the blue marker indicates the minor stresses.
Figure 13 Normal stresses in the X complete system (mandibular bone, dental organs, brackets, and wires). The red marker indicates the maximum stresses, and the blue marker indicates the minor stresses.CC BY · PubMed Central
Figure 14 Normal stresses in the Y complete system (mandibular bone, dental organs, brackets, and wires). The red marker indicates the maximum stresses, and the blue marker indicates the minor stresses.
Figure 14 Normal stresses in the Y complete system (mandibular bone, dental organs, brackets, and wires). The red marker indicates the maximum stresses, and the blue marker indicates the minor stresses.CC BY · PubMed Central
Figure 15 Normal stresses in the Z complete system (mandibular bone, dental organs, brackets, and wires). The red marker indicates the maximum stresses, and the blue marker indicates the minor stresses.
Figure 15 Normal stresses in the Z complete system (mandibular bone, dental organs, brackets, and wires). The red marker indicates the maximum stresses, and the blue marker indicates the minor stresses.CC BY · PubMed Central
Figure 16 Normal stresses in X, mandibular bone. The red marker indicates the maximum stresses, and the blue marker indicates the minor stresses.
Figure 16 Normal stresses in X, mandibular bone. The red marker indicates the maximum stresses, and the blue marker indicates the minor stresses.CC BY · PubMed Central
Figure 17 Normal stresses in Y, mandibular bone. The red marker indicates the maximum stresses, and the blue marker indicates the minor stresses.
Figure 17 Normal stresses in Y, mandibular bone. The red marker indicates the maximum stresses, and the blue marker indicates the minor stresses.CC BY · PubMed Central
Figure 18 Normal stresses in Z, mandibular bone. The red marker indicates the maximum stresses, and the blue marker indicates the minor stresses.
Figure 18 Normal stresses in Z, mandibular bone. The red marker indicates the maximum stresses, and the blue marker indicates the minor stresses.CC BY · PubMed Central
Figure 19 Normal stresses in the wire: (a) X axis; (b) Y axis; (c) Z axis. The red marker indicates the maximum stresses, and the blue marker indicates the minor stresses.
Figure 19 Normal stresses in the wire: (a) X axis; (b) Y axis; (c) Z axis. The red marker indicates the maximum stresses, and the blue marker indicates the minor stresses.CC BY · PubMed Central
Figure 20 von Mises stresses on the complete system (mandibular bone, dental organs, brackets, and wires). The red marker indicates the maximum stresses, and the blue marker indicates the minor stresses.
Figure 20 von Mises stresses on the complete system (mandibular bone, dental organs, brackets, and wires). The red marker indicates the maximum stresses, and the blue marker indicates the minor stresses.CC BY · PubMed Central
Figure 21 von Mises stresses on the mandibular bone. The red marker indicates the maximum stresses, and the blue marker indicates the minor stresses.
Figure 21 von Mises stresses on the mandibular bone. The red marker indicates the maximum stresses, and the blue marker indicates the minor stresses.CC BY · PubMed Central
Figure 22 von Mises stresses on the wire. The red marker indicates the maximum stresses, and the blue marker indicates the minor stresses.
Figure 22 von Mises stresses on the wire. The red marker indicates the maximum stresses, and the blue marker indicates the minor stresses.CC BY · PubMed Central
Figure 23 Total deformations (mm). The graph shows a comparison between the deformations that were generated in each of the analyzed sections: complete system (mandibular bone, dental organs, brackets, and wires) and separately the mandible and the two different types of arches or wires.
Figure 23 Total deformations (mm). The graph shows a comparison between the deformations that were generated in each of the analyzed sections: complete system (mandibular bone, dental organs, brackets, and wires) and separately the mandible and the two different types of arches or wires.CC BY · PubMed Central
Figure 24 Normal stresses in the X axis (MPa). The graph shows a comparison between the stresses in the X axis that were generated in each of the analyzed sections: complete system (mandibular bone, dental organs, brackets, and wires) and separately the mandible and the two different types of arches or wires.
Figure 24 Normal stresses in the X axis (MPa). The graph shows a comparison between the stresses in the X axis that were generated in each of the analyzed sections: complete system (mandibular bone, dental organs, brackets, and wires) and separately the mandible and the two different types of arches or wires.CC BY · PubMed Central
Figure 25 Normal stresses in the Y axis (MPa). The graph shows a comparison between the stresses in the Y axis that were generated in each of the analyzed sections: complete system (mandibular bone, dental organs, brackets, and wires) and separately the mandible and the two different types of arches or wires.
Figure 25 Normal stresses in the Y axis (MPa). The graph shows a comparison between the stresses in the Y axis that were generated in each of the analyzed sections: complete system (mandibular bone, dental organs, brackets, and wires) and separately the mandible and the two different types of arches or wires.CC BY · PubMed Central
Figure 26 Normal stresses in the Z axis (MPa). The graph shows a comparison between the stresses in the Z axis that were generated in each of the analyzed sections: complete system (mandibular bone, dental organs, brackets, and wires) and separately the mandible and the two different types of arches or wires.
Figure 26 Normal stresses in the Z axis (MPa). The graph shows a comparison between the stresses in the Z axis that were generated in each of the analyzed sections: complete system (mandibular bone, dental organs, brackets, and wires) and separately the mandible and the two different types of arches or wires.CC BY · PubMed Central
Figure 27 von Mises stresses (MPa). The graph shows a comparison between von Mises stresses that were generated in each of the analyzed sections: complete system (mandibular bone, dental organs, brackets, and wires) and separately the mandible and the two different types of arches or wires.
Figure 27 von Mises stresses (MPa). The graph shows a comparison between von Mises stresses that were generated in each of the analyzed sections: complete system (mandibular bone, dental organs, brackets, and wires) and separately the mandible and the two different types of arches or wires.CC BY · PubMed Central

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 26 references

Cited by

See all 4

Metadata

Authors
Hernández-Vázquez, R. A., Marquet-Rivera, R. A., Mastache-Miranda, O. A., Vázquez-López, A. J., Cruz-López, S., & Vázquez-Feijoo, J. A.
Affiliations
  • Polytechnic University of the Valley of Mexico (MX)
  • Instituto Politécnico Nacional (MX)
  • Instituto Politécnico Nacional, Escuela Superior de Ingeniería Mecánica y Eléctrica, Sección de Estudios de Posgrado e Investigación, Unidad Profesional Adolfo López Mateos “Zacatenco”, Avenida Instituto Politécnico Nacional s/n, Edificio 5, 2do. Piso, Col. Lindavista, C.P. 07320 Ciudad de México, Mexico
Corresponding author
  • Hernández-Vázquez, Rosa Alicia
  • Marquet-Rivera, Rodrigo Arturo
Venue
Applied Bionics and Biomechanics
Publisher
Wiley
Published
2021-03-25
Volume
2021
Pages
1-15
ISSN
  • 1176-2322 (ISSN-L)
  • 1754-2103
OpenAlex
W3141284216
Cited by
4
References
26
Citations by year
2025: 1 · 2022: 1 · 2021: 2
FWCI
0.78
Type
journal article
Language
en
Open access
Locations
  • Applied Bionics and Biomechanics (publishedVersion, cc-by)
  • PubMed Central (publishedVersion, cc-by)
  • PubMed (publishedVersion)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
Funders
  • Universidad Politécnica del Valle de México
  • Consejo Nacional de Ciencia y Tecnología
  • Instituto Politécnico Nacional
Topics
  • Health Sciences › Dentistry › Orthodontics › Orthodontics and Dentofacial Orthopedics
  • Health Sciences › Dentistry › General Dentistry › Dental materials and restorations
  • Health Sciences › Dentistry › General Dentistry › Dental Trauma and Treatments
Keywords
orthodontic archwires, compensation, finite element analysis

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Comparative Numerical Analysis between Two Types of Orthodontic Wire for the Lingual Technique, Using the Finite Element Method. https://app.cochat.ai/papers/10.1155/2021/6658039
The paper
Hernández-Vázquez, R. A., Marquet-Rivera, R. A., Mastache-Miranda, O. A., Vázquez-López, A. J., Cruz-López, S., & Vázquez-Feijoo, J. A. (2021). Comparative Numerical Analysis between Two Types of Orthodontic Wire for the Lingual Technique, Using the Finite Element Method. Applied Bionics and Biomechanics. https://doi.org/10.1155/2021/6658039

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.