Directional adhesion for climbing: theoretical and practical considerations
The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
Using the gecko as inspiration, important principles are revealed for reliable maneuvering on vertical surfaces. Foremost among these is the directional behavior of the gecko adhesive system, which permits control of adhesion via control of the tangential forces at the feet. Multiple hierarchical levels of compliance are also important for conforming intimately to surfaces with varying degrees of roughness and different length scales. In light of these requirements, most previously developed synthetic adhesives are not well suited for application on a climbing robot. We describe a synthetic fibrillar adhesive, termed Directional Polymer Stalks, made from relatively soft polyurethane (modulus of elasticity ≈ 300 kPa). The fibrils are angled 20° with respect to vertical and are approximately 1 mm long and 380 μm in diameter. Rather than having a flat top, they have angled faces at 45°. The directional nature of these angled stalks is shown, achieving a maximum adhesion of approximately 1 N for a 3.9 cm2 patch when pulled in the direction in which the stalks are angled. When pulled in the non-adhesive direction, the adhesion forces are negligible. The application to a climbing robot is presented and limitations of the current design are discussed along with ongoing efforts to address them.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Properties, Principles, and Parameters of the Gecko Adhesive System
Autumn, K. (2006) · Biological Adhesives · doi:10.1007/978-3-540-31049-5_12 · Cited by 154
Cited by
A nontransferring dry adhesive with hierarchical polymer nanohairs
Jeong, H. E., Lee, J.-K., Kim, H. N., Moon, S. H., & Suh, K. Y. (2009) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0900323106 · Cited by 558
Gecko‐Inspired Surfaces: A Path to Strong and Reversible Dry Adhesives
Boesel, L. F., Greiner, C., Arzt, E., & del Campo, A. (2010) · Advanced Materials · doi:10.1002/adma.200903200 · Cited by 472
A Soft Robotic Gripper With Gecko-Inspired Adhesive
Glick, P., Suresh, S. A., Ruffatto, D., Cutkosky, M., Tolley, M. T., & Parness, A. (2018) · IEEE Robotics and Automation Letters · doi:10.1109/lra.2018.2792688 · Cited by 381
Self-citationParness, A., Soto, D., Esparza, N., Gravish, N., Wilkinson, M., Autumn, K., & Cutkosky, M. (2009) · Journal of The Royal Society Interface · doi:10.1098/rsif.2009.0048 · Cited by 277
Self-citationFunctional Adhesive Surfaces with “Gecko” Effect: The Concept of Contact Splitting
Kamperman, M., Kroner, E., del Campo, A., McMeeking, R. M., & Arzt, E. (2010) · Advanced Engineering Materials · doi:10.1002/adem.201000104 · Cited by 274
Metadata
- Authors
- Santos, D., Spenko, M., Parness, A., Kim, S., & Cutkosky, M.
- Venue
- Journal of Adhesion Science and Technology
- Publisher
- Informa UK Limited
- Published
- 2007-01
- Volume
- 21
- Issue
- 12-13
- Pages
- 1317-1341
- ISSN
- 0169-4243 (ISSN-L)
- 1568-5616
- OpenAlex
- W2037321574
- Cited by
- 145
- References
- 1
- FWCI
- 16.43
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Directional adhesion for climbing: theoretical and practical considerations. https://app.cochat.ai/papers/10.1163/156856107782328399
- The paper
- Santos, D., Spenko, M., Parness, A., Kim, S., & Cutkosky, M. (2007). Directional adhesion for climbing: theoretical and practical considerations. Journal of Adhesion Science and Technology. https://doi.org/10.1163/156856107782328399
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.