The DOI matches its Crossref record.
Synthesis and properties of photocross-linked poly(propylene fumarate) scaffolds
Abstract
The photocross-linking of poly(propylene fumarate) (PPF) to form porous scaffolds for bone tissue engineering applications was investigated. PPF was cross-linked using the photoinitiator bis(2,4,6-trimethylbenzoyl) phenylphosphine oxide (BAPO) and exposure to 30 min of long wavelength ultraviolet (UV) light. The porous photocross-linked PPF scaffolds (6.5 mm diameter cylinders) were synthesized by including a NaCl porogen (70, 80, and 90 wt% at cross-linking) prior to photocross-linking. After UV exposure, the samples were placed in water to remove the soluble porogen, revealing the porous PPF scaffold. As porogen leaching has not been used often with cross-linked polymers, and even more rarely with photoinitiated cross-linking, a study of the efficacy of this strategy and the properties of the resulting material was required. Results show that the inclusion of a porogen does not significantly alter the photoinitiation process and the resulting scaffolds are homogeneously cross-linked throughout their diameter. It was also shown that porosity can be generally controlled by porogen content and that scaffolds synthesized with at least 80 wt% porogen possess an interconnected pore structure. Compressive mechanical testing showed scaffold strength to decrease with increasing porogen content. The strongest scaffolds with interconnected pores had an elastic modulus of 2.3+/-0.5 MPa and compressive strength at 1% yield of 0.11+/-0.02 MPa. This work has shown that a photocross-linking/porogen leaching technique is a viable method to form porous scaffolds from photoinitiated materials.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Porosity of 3D biomaterial scaffolds and osteogenesis
Karageorgiou, V., & Kaplan, D. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2005.02.002 · Cited by 6,622
A review on stereolithography and its applications in biomedical engineering
Melchels, F. P. W., Feijen, J., & Grijpma, D. W. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.04.050 · Cited by 2,457
Scaffolds for tissue fabrication
Ma, P. X. (2004) · Materials Today · doi:10.1016/s1369-7021(04)00233-0 · Cited by 1,077
Pham, Q. P., Sharma, U., & Mikos, A. G. (2006) · Biomacromolecules · doi:10.1021/bm060680j · Cited by 956
Self-citationPolymeric materials for bone and cartilage repair
Puppi, D., Chiellini, F., Piras, A. M., & Chiellini, E. (2010) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2010.01.006 · Cited by 913
Metadata
- Authors
- P.Fisher, J., Holland, T. A., Dean, D., Engel, P. S., & Mikos, A. G.
- Venue
- Journal of Biomaterials Science, Polymer Edition
- Publisher
- Informa UK Limited
- Published
- 2001-01
- Volume
- 12
- Issue
- 6
- Pages
- 673-687
- ISSN
- 0920-5063 (ISSN-L)
- 1568-5624
- OpenAlex
- W1997684793
- Cited by
- 175
- References
- 0
- FWCI
- 6.78
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Synthesis and properties of photocross-linked poly(propylene fumarate) scaffolds. https://app.cochat.ai/papers/10.1163/156856201316883476
- The paper
- P.Fisher, J., Holland, T. A., Dean, D., Engel, P. S., & Mikos, A. G. (2001). Synthesis and properties of photocross-linked poly(propylene fumarate) scaffolds. Journal of Biomaterials Science, Polymer Edition. https://doi.org/10.1163/156856201316883476
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.