CoChat

Adversarial Data Augmentation and Transfer Net for Scrap Metal Identification Using Laser-Induced Breakdown Spectroscopy Measurement of Standard Reference Materials

Srivastava, Ekta, Kim, Hyebin, Lee, Jaepil, Shin, Sungho, Jeong, Sungho, Hwang, Euiseok · 2023 · Applied Spectroscopy
Cited by 14

The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.

Abstract

In this study, we propose a transfer learning-based classification model for identifying scrap metal using an augmented training dataset consisting of laser-induced breakdown spectroscopy (LIBS) measurement of standard reference material (SRMs) samples, considering varying experimental setups and environmental conditions. LIBS provides unique spectra for identifying unknown samples without complicated sample preparation. Thus, LIBS systems combined with machine learning methods have been actively studied for industrial applications such as scrap metal recycling. However, in machine learning models, a training set of the used samples may not cover the diversity of the scrap metal encountered in field measurements. Moreover, differences in experimental configuration, where laboratory standards and real samples are analyzed in situ, may lead to a wider gap in the distribution of training and test sets, dramatically reducing the performance of the LIBS-based fast classification system for real samples. To address these challenges, we propose a two-step Aug2Tran model. First, we augment the SRM dataset by synthesizing spectra of unobserved types through attenuation of dominant peaks corresponding to sample composition and generating spectra depending on the target sample using a generative adversarial network. Second, we used the augmented SRM dataset to build a robust real-time classification model with a convolutional neural network, which is further customized for the target scrap metal with limited measurements through transfer learning. For evaluation, SRMs of five representative metal types, including aluminum, copper, iron, stainless steel, and brass, are measured with a typical setup to form the SRM dataset. For testing, scrap metal from actual industrial fields is experimented with three different configurations, resulting in eight different test datasets. The experimental results show that the proposed scheme produces an average classification accuracy of 98.25% for the three experimental conditions, as high as the results of the conventional scheme with three separately trained and executed models. Additionally, the proposed model improves the classification accuracy of arbitrarily shaped static or moving samples with various surface contaminations and compositions, and even for differing ranges of charted intensities and wavelengths. Therefore, the proposed Aug2Tran model can be used as a systematic model for scrap metal classification with generalizability and ease of implementation.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1177/00037028231170234

Cites

3 of 3 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 3 references

Research works printed but not linked: 46

  1. Anabitarte F. Cobo A. Lopez-Higuera J.M.. “Laser-Induced Breakdown Spectroscopy: Fundamentals Applications and Challenges”. Int. Scholarly Res. Not. 2012. Article no. 285240. doi:10.5402/2012/285240 · DOI · Paper page
  2. 10.1366/11-06574 · DOI · Paper page
  3. 10.1021/ac303220r · DOI · Paper page
  4. 10.1186/s12302-021-00480-4 · doi:10.1186/s12302-021-00480-4
  5. 10.1080/05704928.2020.1791151 · DOI
  6. 10.1039/D0AY02089C · doi:10.1039/d0ay02089c
  7. Nie X.-C.. “Application of Laser-Induced Breakdown Spectroscopy in Deep Space Exploration”. Proc. SPIE 1142 7 Second Target Recognition and Artificial Intelligence Summit Forum. 2020. 114271D. 10.1117/12.2551440 · doi:10.1117/12.2551440
  8. 10.1088/2058-6272/ab481e · DOI
  9. Cho M., Park S., Kwon E., Jeong S., et al. “A Waste Metal Sorting System Using LIBS Classification”. Paper presented at: IEEE 28th International Symposium on Industrial Electronics (ISIE). Vancouver, BC, Canada; 12–14 June 2019. Pp. 451-454. 10.1109/ISIE.2019.8781099 · doi:10.1109/isie.2019.8781099
  10. 10.1007/s40684-021-00364-1 · DOI
  11. Kim H., Lee L., Srivastava E., Shin S., et al. “Front-End Signal Processing for Metal Scrap Classification Using Online Measurements Based on Laser-Induced Breakdown Spectroscopy”. Spectrochim. Acta, Part B. 2021. 184: 106282. 10.1016/j.sab.2021.106282 · DOI
  12. 10.1177/00037028198814 · doi:10.1177/00037028198814
  13. 10.1177/00037028209155 · doi:10.1177/00037028209155
  14. 10.1039/D1JA00032B · DOI
  15. 10.1177/00037028221092 · doi:10.1177/00037028221092
  16. 10.1177/00037028221091 · doi:10.1177/00037028221091
  17. Li L., Liu X., Yang F., Xu W.-M., et al. “A Review of Artificial Neural Network Based Chemometrics Applied in Laser-Induced Breakdown Spectroscopy Analysis”. Spectrochim. Acta, Part B. 2021. 180: 106183. 10. doi:1016/j.sab.2021.106183
  18. Grzegorzek M. Schwerbel D. Balthasar D. et al. “Automatic Sorting of Alluminium Alloys Based on Spectroscopy Measures”. In: 35th Annual Workshop of the Austrian Association for Pattern Recognition (OAGM). doi:10.48550/arXiv.1505.01065 · arXiv · doi:10.48550/arxiv.1505.01065
  19. 10.1177/0003702819861576 · doi:10.1177/0003702819861576
  20. 10.14429/dsj.67.10690 · doi:10.14429/dsj.67.10690
  21. 10.1364/OE.402149 · DOI
  22. 10.1007/978-3-030-68763-2_47 · doi:10.1007/978-3-030-68763-2_47
  23. 10.1109/ICPR48806.2021.9413119 · DOI
  24. 10.1039/C8JA00076J · DOI · Paper page
  25. 10.1016/j.radphyschem.2021.109515 · doi:10.1016/j.radphyschem.2021.109515
  26. 10.1088/1402-4896/ac1a87 · doi:10.1088/1402-4896/ac1a87
  27. Cui H., Tang Y., Ma S., Ma Y., et al. “Influence of Laser Wavelength on Self-Absorption Effect in Laser-Induced Breakdown Spectroscopy”. Optik. 2020. 204: 164144. 10.1016/j.ijleo.2019.164144 · doi:10.1016/j.ijleo.2019.164144
  28. 10.1007/s00216-006-0300-1 · DOI
  29. 10.1016/j.optlastec.2019.106035 · DOI
  30. 10.1016/j.sab.2007.10.041 · doi:10.1016/j.sab.2007.10.041
  31. 10.1016/j.marpolbul.2021.112789 · DOI
  32. 10.1007/s11467-012-0263-y · doi:10.1007/s11467-012-0263-y
  33. 10.1186/s41476-021-00164-9 · DOI
  34. 10.1016/j.trac.2022.116618 · DOI
  35. 10.1016/j.sab.2022.106478 · DOI
  36. 10.1038/s41598-021-00647-2 · DOI
  37. 10.1088/2058-6272/ab7d48 · DOI
  38. 10.1109/LGRS.2017.2780890 · DOI · Paper page
  39. 10.1039/C9RA00805E · DOI
  40. 10.1016/j.sab.2020.105801 · DOI
  41. 10.1039/C8JA00069G · doi:10.1039/c8ja00069g
  42. 10.1039/D0JA00334D · DOI
  43. 10.1039/D1JA00076D · DOI · Paper page
  44. 10.1186/s40537-017-0089-0 · DOI · Paper page
  45. 10.1016/j.mex.2021.101408 · DOI
  46. 10.1109/CSPA48992.2020.9068683 · DOI

Metadata

Authors
Srivastava, E., Kim, H., Lee, J., Shin, S., Jeong, S., & Hwang, E.
Venue
Applied Spectroscopy
Published
2023-04-25
Volume
77
Issue
6
Pages
603-615
ISSN
  • 0003-7028
  • 1943-3530
Cited by
14
References
3
Language
en
Licence
journals.sagepub.com/page/policies/text-and-data-mining-license (tdm)
Funders
  • Artificial Intelligence Graduate School Program (2019-0-01842)
  • Ministry of Environment, Govt. of Republic of Korea (2016002250003)
  • Institute of Information & Communications Technology Planning & Evaluation (IITP), Govt. of Korea

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Adversarial Data Augmentation and Transfer Net for Scrap Metal Identification Using Laser-Induced Breakdown Spectroscopy Measurement of Standard Reference Materials. https://app.cochat.ai/papers/10.1177/00037028231170234
The paper
Srivastava, E., Kim, H., Lee, J., Shin, S., Jeong, S., & Hwang, E. (2023). Adversarial Data Augmentation and Transfer Net for Scrap Metal Identification Using Laser-Induced Breakdown Spectroscopy Measurement of Standard Reference Materials. Applied Spectroscopy. https://doi.org/10.1177/00037028231170234

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.