The DOI matches its Crossref record.
Durability of basalt fibers and composites in corrosive environments
Abstract
This study describes an experimental investigation of the degradation of the tensile properties of basalt fibers and epoxy-based composites in various corrosive environments, including alkaline, acid, salt and water solutions, and clarifies the corresponding degradation mechanisms. Carbon and glass fibers and their composites are adopted as references. Accelerated experiments were conducted at temperatures of 25℃ and 55℃ and the variation in tensile properties was studied by means of tension testing, mass loss weighing, scanning electron microscope imaging and energy spectrum analysis. The experimental results show that basalt fibers posses relatively strong resistance to water and salt corrosion, moderate resistance to acid corrosion and severe degradation in an alkaline solution. The tensile properties of basalt FRP composites are much better than those of basalt fibers. The degradation mechanism of basalt fibers involves damage by etching in salt, water and alkaline solutions and by change in the chemical composites in an acid solution. The fracture properties of basalt FRP composites are controlled by the failure of corroded interfaces between the fibers and the resin, making the interface the critical factor, rather than the fiber itself.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Basalt-based fiber-reinforced materials and structural applications in civil engineering
Monaldo, E., Nerilli, F., & Vairo, G. (2019) · Composite Structures · doi:10.1016/j.compstruct.2019.02.002 · Cited by 368
Fresh, mechanical, and durability properties of basalt fiber-reinforced concrete (BFRC): A review
Al-Rousan, E. T., Khalid, H. R., & Rahman, M. K. (2023) · Developments in the Built Environment · doi:10.1016/j.dibe.2023.100155 · Cited by 148
Metadata
- Authors
- Wu, G., Wang, X., Wu, Z., Dong, Z., & Zhang, G.
- Venue
- Journal of Composite Materials
- Publisher
- SAGE Publications
- Published
- 2014-03-11
- Volume
- 49
- Issue
- 7
- Pages
- 873-887
- ISSN
- 0021-9983 (ISSN-L)
- 1530-793X
- OpenAlex
- W2132968970
- Cited by
- 235
- References
- 0
- FWCI
- 7.79
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Durability of basalt fibers and composites in corrosive environments. https://app.cochat.ai/papers/10.1177/0021998314526628
- The paper
- Wu, G., Wang, X., Wu, Z., Dong, Z., & Zhang, G. (2015). Durability of basalt fibers and composites in corrosive environments. Journal of Composite Materials. https://doi.org/10.1177/0021998314526628
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.