The DOI matches its Crossref record.
Simulating the performance of rainwater collection and reuse systems using behavioural models
Abstract
The collection of rainwater from roofs and its storage and subsequent use make a significant saving in the use of potable water. The capacity of the rainwater store is important because it affects both system and initial costs. The investigation concentrates upon the use of behavioural models to simulate the performance of rainwater collectors. The input data, in time series form, is used to simulate the mass flows through the model, and will be based upon time intervals of a minute, an hour, a day or a month. A preliminary mapping exercise is described that evaluates the accuracy of behavioural models for the sizing of rainwater collection systems using different time intervals and different reservoir operating rules applied to a range of reservoir capacities and collection areas. The preliminary analysis indicated that the yield after spillage (YAS) reservoir operating algorithm based on a hourly time interval could be used as a standard against which other models could be compared and calibrated. The detailed analysis enabled constraints to be proposed for the application of hourly, daily and monthly models expressed in terms of storage fraction, S/AR, where S = storage capacity (m 3 ), A = roof area (m 2) and R = annual rainfall (m). Hourly models can be used for sizing small stores with a storage fraction below or equal to 0.01. Daily models can be applied to systems with storage fractions within the range 0.01 to 0.125. Monthly models are only recommended for use with storage fractions in excess of 0.125.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Urban rainwater harvesting systems: Research, implementation and future perspectives
Campisano, A., Butler, D., Ward, S., Burns, M. J., Friedler, E., DeBusk, K., Fisher-Jeffes, L. N., Ghisi, E., Rahman, A., Furumai, H., et al. (2017) · Water Research · doi:10.1016/j.watres.2017.02.056 · Cited by 759
Self-citationRainwater Harvesting and Treatment: State of the Art and Perspectives
Raimondi, A., Quinn, R., Abhijith, G. R., Becciu, G., & Ostfeld, A. (2023) · Water · doi:10.3390/w15081518 · Cited by 138
Metadata
- Authors
- Fewkes, A., & Butler, D.
- Venue
- Building Services Engineering Research and Technology
- Publisher
- SAGE Publications
- Published
- 2000-05
- Volume
- 21
- Issue
- 2
- Pages
- 99-106
- ISSN
- 0143-6244 (ISSN-L)
- 1477-0849
- OpenAlex
- W2068740121
- Cited by
- 184
- References
- 0
- FWCI
- 1.16
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Simulating the performance of rainwater collection and reuse systems using behavioural models. https://app.cochat.ai/papers/10.1177/014362440002100204
- The paper
- Fewkes, A., & Butler, D. (2000). Simulating the performance of rainwater collection and reuse systems using behavioural models. Building Services Engineering Research and Technology. https://doi.org/10.1177/014362440002100204
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.