CoChat

A Study of Multifunctional Document Centers that are Accessible to People who are Visually Impaired

Huffman, Lee A., Uslan, Mark M., Burton, Darren M., Eghtesadi, Caesar · 2009 · Journal of Visual Impairment & Blindness

The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.

Abstract

The capabilities of modern photocopy machines have advanced beyond the simple duplication of documents. In addition to the standard functions of copying, collating, and stapling, such machines can be a part of telecommunication networks and provide printing, scanning, faxing, and e-mailing functions. No longer just copy machines, these devices are more aptly described as multifunctional document centers. In the past, the accessibility of basic photocopy machines was not a significant issue for people with visual impairments (that is, those who are blind or have low vision). Typically, copiers had simpler user interfaces, with tactile keypads for selecting the number of copies and Start, Clear, and Stop buttons. As technology has advanced, the user interface was redesigned and has become more complex. Many multifunctional document centers also include a small, embedded touchscreen visual display. Advancements in technology and changes to the user interface of multifunctional document centers created accessibility barriers for employees with visual impairments that previously did not exist. In addition, legislation and demographic factors contributed to the need to develop accessible multifunctional document centers. Although estimates vary, it has been reported that approximately 21.2 million Americans have vision loss, 6.2 million of whom are aged 65 and older (Pleis & Lethbridge-Cejku, 2007). People with vision loss were defined by the 2006 National Health Interview Survey are those who reported that they have trouble seeing, even when wearing eyeglasses or contact lenses, are blind, or are unable to see at all. Recent employment data shows that of working age Americans with significant vision loss, nearly 60% are not employed or in the labor force (U.S. Department of Labor, 2009). As it has been commonly noted for more than a decade, nearly 70% of individuals in the United States who are legally blind are unemployed (Centers for Disease Control and Prevention, 1995). Many factors contribute to this high unemployment rate, including the inaccessibility of common workplace technology. Over time, the problem will be compounded as the baby-boomer generation ages, because the population of older people with visual impairments will increase significantly. The enactment of Section 508 of the Rehabilitation Act Amendments of 1998 prohibits the federal government from procuring, developing, maintaining, or using electronic and information technology that is inaccessible to people with disabilities. In addition, more than 20 states have also implemented this law. Section 508 applies to office equipment products including multifunctional document centers. In recent years, Canon and Xerox have introduced multifunctional document centers that provide accessibility features. Although they provide a similar level of access, these manufacturers use different product architecture to address the requirements of accessible design. This report presents an evaluation of the accessibility and usability of the access solutions for people who are visually impaired of Canon's and Xerox's multifunctional document centers. It also takes the first steps in addressing the lack of a display standard for small visual displays, such as those used in both multifunctional document centers described here, and investigates how to optimize for people with visual impairments the parameters of designs of such displays (see Box 1). METHOD Eghtesadi et al. (2002) noted that office workers who are blind or have low vision need to use all the major functionalities of a multifunctional document center, including duplicating, collating, and stapling. To create office equipment that is accessible to a wide range of people, manufacturers need to take a universal design approach. The seven principles of universal design focus on creating products that are usable by the widest possible array of people and that can be operated in the widest range of conditions. …

Overview

Integrity signals

Registry

Crossref · 10.1177/0145482x0910300405

Cites

5 of 5 references verified0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Verification

Claims the paper makes

This paper’s full text isn’t openly available, so its claims and self-check weren’t run. The registry and citation checks still apply.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Citations

Cites

Show all 5 references

Research works printed but not linked: 2

  1. Centers for Disease Control and Prevention., 1995, 1994–1995 National Health Interview Survey on Disability.
  2. Vanderheiden G., 1992, Accessible design of consumer electronics: Guidelines for the design of consumer products to increase their accessibility to people with disabilities or who are aging (Working draft 1.7).

Cited by

See all 6

Metadata

Authors
Huffman, L. A., Uslan, M. M., Burton, D. M., & Eghtesadi, C.
Affiliations
  • American Foundation for the Blind (US)
  • AFB TECH
  • National program associate, AFB TECH
Corresponding author
  • Huffman, Lee A.
  • Uslan, Mark M.
  • Burton, Darren M.
  • Eghtesadi, Caesar
Venue
Journal of Visual Impairment & Blindness
Published
2009-04
Volume
103
Issue
4
Pages
223-229
ISSN
  • 0145-482X (ISSN-L)
  • 1559-1476
OpenAlex
W271789074
Cited by
6
References
5
Citations by year
2024: 1 · 2019: 1 · 2017: 1 · 2016: 2
FWCI
1.01
Type
journal article
Language
en
Open access
closed
Licence
journals.sagepub.com/page/policies/text-and-data-mining-license (tdm)
Locations
Journal of Visual Impairment & Blindness (publishedVersion)
Topics
  • Social Sciences › Human Factors and Ergonomics › Digital Accessibility for Disabilities
  • Health Sciences › Health Professions › Occupational Therapy › Assistive Technology in Communication and Mobility
  • Physical Sciences › Computer Science › Human-Computer Interaction › Usability and User Interface Design
Keywords
centers, accessibility, visual impairment, blind and visually impaired users, user interface design, touch screen, Section 508, assistive technology, older workers, accessibility legislation

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: A Study of Multifunctional Document Centers that are Accessible to People who are Visually Impaired. https://app.cochat.ai/papers/10.1177/0145482x0910300405
The paper
Huffman, L. A., Uslan, M. M., Burton, D. M., & Eghtesadi, C. (2009). A Study of Multifunctional Document Centers that are Accessible to People who are Visually Impaired. Journal of Visual Impairment & Blindness. https://doi.org/10.1177/0145482x0910300405

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.