Toward a Theory of Geometric Tolerancing
The DOI matches its Crossref record; 9 of the 9 references it cites were found in a registry or an index.
Abstract
Manual drafting is rapidly being replaced by modern, computerized systems for defining the geometry of mechanical parts and assemblies, and a new generation of powerful systems, called geometric (solid) modeling systems (GMSs), is entering industrial use. Solid models are beginning to play an important role in off-line robot programming, model- driven vision, and other industrial robotic applications. A major deficiency of current GMSs is their lack of facilities for specifying tolerancing information, which is essential for design analysis, process planning, assembly planning for tightly toleranced components, and other applications of solid modeling. This paper proposes a mathe matical theory of tolerancing that formalizes and generalizes current practices and is a suitable basis for incorporating tolerances into GMSs. A tolerance specification in the proposed theory is a collection ofgeometric constraints on an object's surface features, which are two-dimensional subsets of the object's boundary. An object is in tolerance if its surface features lie within tolerance zones, which are regions of space constructed by offsetting (expanding or shrinking) the object's nominal boundaries.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
An algorithm for planning collision-free paths among polyhedral obstacles
Lozano-Pérez, T., & Wesley, M. A. (1979) · Communications of the ACM · doi:10.1145/359156.359164 · Cited by 2,304
Representations for Rigid Solids: Theory, Methods, and Systems
Requicha, A. G. (1980) · ACM Computing Surveys · doi:10.1145/356827.356833 · Cited by 1,436 · cited 2×
“A conjecture: variational classes are regular closed sets in a hyperspace (Nadler 1978) whose elements are r-sets (Requicha 1980).”
BackgroundSelf-citationSymbolic reasoning among 3-D models and 2-D images
Brooks, R. A. (1981) · Artificial Intelligence · doi:10.1016/0004-3702(81)90028-x · Cited by 775
Solid Modeling: A Historical Summary and Contemporary Assessment
Requicha, & Voelcker (1982) · IEEE Computer Graphics and Applications · doi:10.1109/mcg.1982.1674149 · Cited by 520
Set Membership Classification: A Unified Approach to Geometric Intersection Problems
Tilove (1980) · IEEE Transactions on Computers · doi:10.1109/tc.1980.1675470 · Cited by 294
Symbolic Error Analysis and Robot Planning
Brooks, R. A. (1982) · The International Journal of Robotics Research · doi:10.1177/027836498200100403 · Cited by 226
Brown (1982) · IEEE Computer Graphics and Applications · doi:10.1109/mcg.1982.1674167 · Cited by 164
Lee, Y. T., & Requicha, A. A. G. (1982) · Communications of the ACM · doi:10.1145/358628.358648 · Cited by 102
Self-citationRepresentation of Tolerances in Solid Modeling: Issues and Alternative Approaches
Requicha, A. A. G. (1984) · Springer eBooks · doi:10.1007/978-1-4613-2811-7_1 · Cited by 73
Self-citation
Cited by
Solid Modeling: Current Status and Research Directions
G. Requicha, A., & Voelcker, H. (1983) · IEEE Computer Graphics and Applications · doi:10.1109/mcg.1983.263271 · Cited by 301
Bloomenthal, J., & Shoemake, K. (1991) · Proceedings of the 18th annual conference on Computer graphics and interactive techniques · doi:10.1145/122718.122757 · Cited by 242
Shapiro, V. (2002) · Handbook of Computer Aided Geometric Design · doi:10.1016/b978-044451104-1/50021-6 · Cited by 69
Metadata
- Authors
- Requicha, A. A. G.
- Venue
- The International Journal of Robotics Research
- Publisher
- SAGE Publications
- Published
- 1983-12
- Volume
- 2
- Issue
- 4
- Pages
- 45-60
- ISSN
- 0278-3649 (ISSN-L)
- 1741-3176
- OpenAlex
- W2067634170
- Cited by
- 387
- References
- 9
- FWCI
- 30.20
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.