Force Tracking in Impedance Control
The DOI matches its Crossref record; 7 of the 7 references it cites were found in a registry or an index.
Abstract
This article presents two simple on-line schemes for force tracking within the impedance-control framework. The force- tracking capability of impedance control is particularly important for providing robustness in the presence of large uncertainties or variations in environmental parameters. The two proposed schemes generate the reference position trajec tory required to produce a desired contact force despite lack of knowledge of the environmental stiffness and location. The first scheme uses direct adaptive control to generate the refer ence position on-line as a function of the force-tracking error. Alternatively, the second scheme utilizes an indirect adaptive strategy in which the environmental parameters are estimated on-line, and the required reference position is computed based on these estimates. In both schemes, adaptation allows au tomatic gain adjustment to provide a uniform performance despite variations in the environmental parameters. Simula tion studies are presented for a 7-DOF Robotics Research arm using full arm dynamics, demonstrating that the adaptive schemes are able to compensate for uncertainties in both the environmental stiffness and location. The simulation studies also highlight the limitations of pure impedance control without the force-tracking capability for robust execution of realistic contact tasks. Experimental results are also presented for the Robotics Research arm to demonstrate that the end effector applies the desired contact force while exhibiting the specified impedance dynamics.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Narendra, K. S., & Annaswamy, A. M. (1989) · Cited by 3,988
Impedance Control: An Approach to Manipulation: Part I—Theory
Hogan, N. (1985) · Journal of Dynamic Systems, Measurement, and Control · doi:10.1115/1.3140702 · Cited by 3,673
Hybrid Position/Force Control of Manipulators
Raibert, M. H., & Craig, J. J. (1981) · Journal of Dynamic Systems, Measurement, and Control · doi:10.1115/1.3139652 · Cited by 3,015
Compliance and Force Control for Computer Controlled Manipulators
Mason, M. T. (1981) · IEEE Transactions on Systems, Man, and Cybernetics · doi:10.1109/tsmc.1981.4308708 · Cited by 1,542
On the stability of manipulators performing contact tasks
Hogan, N. (1988) · IEEE Journal on Robotics and Automation · doi:10.1109/56.9305 · Cited by 276
On force-tracking impedance control of robot manipulators
Lasky, T. A., & Hsia, T. C. (2002) · Proceedings - IEEE International Conference on Robotics and Automation/Proceedings · doi:10.1109/robot.1991.131587 · Cited by 85
Position-based impedance control - Achieving stability in practice
Lawrence, D., & Stoughton, R. M. (1987) · Guidance, Navigation and Control Conference · doi:10.2514/6.1987-2265 · Cited by 41
Cited by
Adaptive variable impedance control for dynamic contact force tracking in uncertain environment
Duan, J., Gan, Y., Chen, M., & Dai, X. (2018) · Robotics and Autonomous Systems · doi:10.1016/j.robot.2018.01.009 · Cited by 421
Admittance control for physical human–robot interaction
Keemink, A. Q., van der Kooij, H., & Stienen, A. H. (2018) · The International Journal of Robotics Research · doi:10.1177/0278364918768950 · Cited by 395
Human–Robot Collaboration Based on Motion Intention Estimation
Li, Y., & Ge, S. S. (2014) · IEEE/ASME Transactions on Mechatronics · doi:10.1109/tmech.2013.2264533 · Cited by 320
Metadata
- Authors
- Seraji, H., & Colbaugh, R.
- Venue
- The International Journal of Robotics Research
- Publisher
- SAGE Publications
- Published
- 1997-02
- Volume
- 16
- Issue
- 1
- Pages
- 97-117
- ISSN
- 0278-3649 (ISSN-L)
- 1741-3176
- OpenAlex
- W2133193265
- Cited by
- 301
- References
- 7
- FWCI
- 9.06
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.