The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Bioplastic based on starch and cellulose nanocrystals from rice straw
Abstract
Bioplastic based on starch as the matrix and cellulose nanocrystals from rice straw as reinforcing filler were prepared in this study. The isolation of cellulose nanocrystal (CNC) followed a series of steps: delignification, sulfuric acid hydrolysis, and sonication. The process afforded short, rod-like CNCs with particle diameter ranging from 10 to 12 nm and crystallinity index of 76.1%. Fourier transform infrared analysis of the CNCs also confirmed absorption patterns typical of cellulose and the removal of silica. Bioplastic with different starch-to-CNC ratios were prepared by solution casting and evaporation method. Scanning electron micrographs of the films showed uniform dispersion of CNC in the starch matrix. Mechanical tests revealed that both tensile strength and modulus significantly increased with increasing CNC load while percent elongation decreased. The moisture uptake of the films reinforced with CNC also decreased an indication of improvement in water resistance. However, the thermal stability of the films decreased by the addition of CNC.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Cellulose nanocrystals: chemistry, self-assembly, and applications
Habibi, Y., Lucia, L. A., & Rojas, O. J. (2010) · Chemical Reviews · doi:10.1021/cr900339w · Cited by 5,980
Rosa, M. F., Medeiros, E. S., Malmonge, J. A., Gregorski, K. S., Wood, D. F., Mattoso, L. H. C., Glenn, G., Orts, W. J., & Imam, S. H. (2010) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2010.01.059 · Cited by 1,099
Cited by
Asgher, M., Qamar, S. A., Bilal, M., & Iqbal, H. M. N. (2020) · Food Research International · doi:10.1016/j.foodres.2020.109625 · Cited by 721
Review of nanocellulose for sustainable future materials
Kim, J.-H., Shim, B. S., Kim, H. S., Lee, Y.-J., Min, S.-K., Jang, D., Abas, Z., & Kim, J. (2015) · International Journal of Precision Engineering and Manufacturing-Green Technology · doi:10.1007/s40684-015-0024-9 · Cited by 498
Bioplastic from Renewable Biomass: A Facile Solution for a Greener Environment
Coppola, G., Gaudio, M. T., Lopresto, C. G., Calabro, V., Curcio, S., & Chakraborty, S. (2021) · Earth Systems and Environment · doi:10.1007/s41748-021-00208-7 · Cited by 362
Advantages and Disadvantages of Bioplastics Production from Starch and Lignocellulosic Components
Abe, M. M., Martins, J. R., Sanvezzo, P. B., Macedo, J. V., Branciforti, M. C., Halley, P., Botaro, V. R., & Brienzo, M. (2021) · Polymers · doi:10.3390/polym13152484 · Cited by 269
Metadata
- Authors
- Agustin, M. B., Ahmmad, B., Alonzo, S. M. M., & Patriana, F. M.
- Venue
- Journal of Reinforced Plastics and Composites
- Publisher
- SAGE Publications
- Published
- 2014-11-05
- Volume
- 33
- Issue
- 24
- Pages
- 2205-2213
- ISSN
- 0731-6844 (ISSN-L)
- 1530-7964
- OpenAlex
- W2144111688
- Cited by
- 169
- References
- 2
- FWCI
- 0.58
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Bioplastic based on starch and cellulose nanocrystals from rice straw. https://app.cochat.ai/papers/10.1177/0731684414558325
- The paper
- Agustin, M. B., Ahmmad, B., Alonzo, S. M. M., & Patriana, F. M. (2014). Bioplastic based on starch and cellulose nanocrystals from rice straw. Journal of Reinforced Plastics and Composites. https://doi.org/10.1177/0731684414558325
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.