The DOI matches its Crossref record.
Sustainability of additive manufacturing: measuring the energy consumption of the laser sintering process
Abstract
The term additive manufacturing (AM) describes a collection of production techniques enabling the layer-by-layer manufacture of components using digital data and raw material as inputs. The AM technology variant most frequently used in the production of end use parts is laser sintering (LS). It has been suggested that efficient usage of the energy inputs is one of the advantages of the technology. This paper presents a comparative assessment of the electricity consumptions of two major polymeric LS platforms: the Sinterstation HiQ + HS from 3D Systems and the EOSINT P 390 from EOS GmbH. The energy inputs to a build consisting of two prosthetic parts were recorded during power-monitoring experiments conducted on both platforms. This paper injects clarity into the ongoing research on the AM energy consumption by applying a novel classification system; it is argued that the AM energy usage can be divided into the job-dependent, time-dependent, geometry-dependent, and Z-height-dependent energy consumption values. The recorded mean real power consumption conforms to the values that have been reported for similar platforms. The measured energy consumption rates are higher than reported elsewhere. It is also shown that the purely time-dependent energy consumption is the main energy drain. Furthermore, the presentation of results in the context of previous literature highlights the caveats attached to summary metrics of the AM input usage.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Additive manufacturing and sustainability: an exploratory study of the advantages and challenges
Ford, S., & Despeisse, M. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.04.150 · Cited by 1,889
Additive manufacturing and its societal impact: a literature review
Huang, S. H., Liu, P., Mokasdar, A., & Hou, L. (2013) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-012-4558-5 · Cited by 1,862
Huang, R., Riddle, M., Graziano, D., Warren, J., Das, S., Nimbalkar, S., Cresko, J., & Masanet, E. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.04.109 · Cited by 805
Unlocking value for a circular economy through 3D printing: A research agenda
Despeisse, M., Baumers, M., Brown, P., Charnley, F., Ford, S. J., Garmulewicz, A., Knowles, S., Minshall, T. H. W., Mortara, L., Reed-Tsochas, F. P., et al. (2017) · Technological Forecasting and Social Change · doi:10.1016/j.techfore.2016.09.021 · Cited by 529
Self-citationPolymeric composites for powder-based additive manufacturing: Materials and applications
Yuan, S., Shen, F., Chua, C. K., & Zhou, K. (2019) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2018.11.001 · Cited by 525
Metadata
- Authors
- Baumers, M., Tuck, C., Bourell, D. L., Sreenivasan, R., & Hague, R.
- Venue
- Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture
- Publisher
- SAGE Publications
- Published
- 2011-09-23
- Volume
- 225
- Issue
- 12
- Pages
- 2228-2239
- ISSN
- 0954-4054 (ISSN-L)
- 2041-2975
- OpenAlex
- W2166683004
- Cited by
- 180
- References
- 0
- FWCI
- 7.21
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Sustainability of additive manufacturing: measuring the energy consumption of the laser sintering process. https://app.cochat.ai/papers/10.1177/0954405411406044
- The paper
- Baumers, M., Tuck, C., Bourell, D. L., Sreenivasan, R., & Hague, R. (2011). Sustainability of additive manufacturing: measuring the energy consumption of the laser sintering process. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. https://doi.org/10.1177/0954405411406044
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.