Optimising lubricated friction coefficient by surface texturing
The DOI matches its Crossref record; 30 of the 31 references it cites were found in a registry or an index.
Abstract
Surface texturing has proved to be a very useful tool for expanding the behaviour under hydrodynamic and elastohydrodynamic regimes instead of mixed or boundary lubrication regimes, and therefore for reducing the friction coefficient under high-load low-speed conditions. This article presents the texturing of different copper test-samples using photolithography and chemical etching to measure the friction coefficient using a point contact machine. The effects of texture size, texturing density, the initial roughness of the samples and the operating conditions have all been studied. Some combinations of texturing density and texture size achieve up to 30% reduction in the friction coefficient. Taking into account experimental data, artificial neural networks are used as a tool for both predicting and optimising the friction coefficient on the textured surface for any given operating condition.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
The perceptron: A probabilistic model for information storage and organization in the brain.
Rosenblatt, F. (1958) · Psychological Review · doi:10.1037/h0042519 · Cited by 12,280
State of the Art in Laser Surface Texturing
Etsion, I. (2005) · Journal of Tribology · doi:10.1115/1.1828070 · Cited by 1,409 · cited 1×
“Laser (LST) NiCrBSi coating Circle Ref.(15,16)”
Wakuda, M., Yamauchi, Y., Kanzaki, S., & Yasuda, Y. (2003) · Wear · doi:10.1016/s0043-1648(03)00004-8 · Cited by 708 · cited 2×
“Depth (d) was measured with a profilometer, resulting in an R/d&2 ratio in most samples, as can be seen in Figure 5, giving a smoother shape than that obtained by other techniques such as Abrasive Jet or Laser technologies.(20) By controlling the time and temperature of the chemical attack different depths can be obta…”
BackgroundMethodKovalchenko, A., Ajayi, O., Erdemir, A., Fenske, G., & Etsion, I. (2005) · Tribology International · doi:10.1016/j.triboint.2004.08.004 · Cited by 608 · cited 1×
“By texturing surfaces the existing lubrication regime can be modified in order to reduce wear and friction.(11) The effect of texturing is shown schematically in the Stribeck curve in Figure 1, where an enlarged EHL zone is observed.”
BackgroundA Theory of Lubrication by Microirregularities
Hamilton, D. B., Walowit, J. A., & Allen, C. M. (1966) · Journal of Basic Engineering · doi:10.1115/1.3645799 · Cited by 581
Ueber die Berührung fester elastischer Körper
Hertz, H. (1882) · De Gruyter eBooks · doi:10.1515/9783112342404-004 · Cited by 565
Influence of surface texture on boundary lubricated sliding contacts
Pettersson, U., & Jacobson, S. (2003) · Tribology International · doi:10.1016/s0301-679x(03)00104-x · Cited by 556 · cited 1×
“Photolithography and thermal oxidation Silicon wafers Square Ref.(17)”
Improving Tribological Performance of Piston Rings by Partial Surface Texturing
Kligerman, Y., Etsion, I., & Shinkarenko, A. (2005) · Journal of Tribology · doi:10.1115/1.1866171 · Cited by 361 · cited 1×
“Work has also been conducted on the development of optimum engineering surfaces by using micro-topographies or surface textures.(9,10) By texturing surfaces the existing lubrication regime can be modified in order to reduce wear and friction.”
BackgroundYu, H., Wang, X., & Zhou, F. (2010) · Tribology Letters · doi:10.1007/s11249-009-9497-4 · Cited by 355 · cited 1×
“Micro-electrolytic etching Steel Circle Ref.(21)”
Principles of neurodynamics: Yu. G. Antomonov
Ivakhnenko, A. G. (1976) · Cybernetics · doi:10.1007/bf01071380 · Cited by 318
Nakano, M., Korenaga, A., Korenaga, A., Miyake, K., Murakami, T., Ando, Y., Usami, H., & Sasaki, S. (2007) · Tribology Letters · doi:10.1007/s11249-007-9257-2 · Cited by 231 · cited 1×
“Micromachining and shot blasting Cast iron Groove Ref.(22)”
BackgroundThe influence of surface roughness on friction and wear of machine element coatings
Svahn, F., Kassman-Rudolphi, Å., & Wallén, E. (2003) · Wear · doi:10.1016/s0043-1648(03)00341-7 · Cited by 214 · cited 1×
“To achieve these goals, the following have been some of the lines of action considered: the development of lubricants with better properties and the development of lowfriction materials with hard surface coatings.(7,8) Work has also been conducted on the development of optimum engineering surfaces by using micro-topog…”
BackgroundInfluentialAnno, J. N., Walowit, J. A., & Allen, C. M. (1968) · Journal of Lubrication Technology · doi:10.1115/1.3601568 · Cited by 161
Bristled shark skin: a microgeometry for boundary layer control?
Lang, A. W., Motta, P., Hidalgo, P., & Westcott, M. (2008) · Bioinspiration & Biomimetics · doi:10.1088/1748-3182/3/4/046005 · Cited by 159
Virtual Texturing: Modeling the Performance of Lubricated Contacts of Engineered Surfaces
Wang, Q. J., & Zhu, D. S. (2005) · Journal of Tribology · doi:10.1115/1.2000273 · Cited by 142 · cited 1×
“In this way a surface design can be produced using experimental methods that substitute or are complementary to simulation or virtual design processes that model mixed-EHL lubrication performance for complex surfaces.(23) SF-100 Intelligent Micro Patterning equipment was used for the photolithography.”
MethodLoad Support and Leakage from Microasperity-Lubricated Face Seals
Anno, J. N., Walowit, J. A., & Allen, C. M. (1969) · Journal of Lubrication Technology · doi:10.1115/1.3555030 · Cited by 139
The effect of surface texturing on thin EHD lubrication films
Křupka, I., & Hartl, M. (2006) · Tribology International · doi:10.1016/j.triboint.2006.10.007 · Cited by 115 · cited 2×
“Figures 10 and 12 show pits in texture outlet that are not found in the inlet area, which can be explained by a sudden reduction of film thickness at the outlet, in agreement with results presented in Křupka and Hartl.24 This effect is more pronounced for highest texture radii, as observed in Figure 13.”
ResultWehenkel, L. A. (1998) · Springer eBooks · doi:10.1007/978-1-4615-5451-6_4 · Cited by 114
Vilhena, L., Podgornik, B., Vižintin, J., & Možina, J. (2010) · Meccanica · doi:10.1007/s11012-010-9316-x · Cited by 87
Ye, Z., Zhang, C., Wang, Y., Cheng, H. S., Tung, S. C., Wang, Q. J., & He, X. (2004) · Wear · doi:10.1016/s0043-1648(03)00538-6 · Cited by 78
Tribological behavior of laser-textured NiCrBSi coatings
Garrido, A. H., González, R., Cadenas, M., & Battez, A. H. (2011) · Wear · doi:10.1016/j.wear.2011.03.027 · Cited by 76 · cited 1×
“Laser (LST) NiCrBSi coating Circle Ref.(15,16)”
Low-friction behaviour of boundary-lubricated diamond-like carbon coatings containing tungsten
Podgornik, B., Hren, D., & Vižintin, J. (2004) · Thin Solid Films · doi:10.1016/j.tsf.2004.09.028 · Cited by 76 · cited 1×
“To achieve these goals, the following have been some of the lines of action considered: the development of lubricants with better properties and the development of lowfriction materials with hard surface coatings.(7,8) Work has also been conducted on the development of optimum engineering surfaces by using micro-topog…”
BackgroundInfluentialDeterministic Micro Asperities on Bearings and Seals Using a Modified LIGA Process
Stephens, L. S., Siripuram, R., Hayden, M. A., & McCartt, B. M. (2004) · Journal of Engineering for Gas Turbines and Power · doi:10.1115/1.1619430 · Cited by 70 · cited 1×
“Nickel electroplating Stainless steel Hexagon Ref.(18)”
The surface texture analysis after sliding burnishing with cylindrical elements
Świrad, S. (2010) · Wear · doi:10.1016/j.wear.2010.05.005 · Cited by 45
‘Zero-wear’ of piston skirt surface topography
Krzyzak, Z., & Pawlus, P. (2005) · Wear · doi:10.1016/j.wear.2005.03.038 · Cited by 40
Otero, J. E., Morgado, P. L., Tanarro, E. C., Ochoa, E. D. L. G., Lantada, A. D., Muñoz-Guijosa, J. M., & Sanz, J. L. M. (2011) · Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology · doi:10.1177/1350650111398848 · Cited by 37 · cited 2×
“The lubricant used in the tests was a polyalphaolefin base PAO6, whose properties can be found in Echávarri et al.(28)”
MethodSelf-citationMorgado, P. L., Otero, J. E., Lejarraga, J. B. S.-P., Sanz, J. L. M., Lantada, A. D., Muñoz-Guijosa, J. M., Lorenzo-Yustos, H., Wiña, P. L., & García, J. M. (2009) · Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology · doi:10.1243/13506501jet599 · Cited by 30
Self-citationAir Film Dynamics for Micro-Textured Flying Head Slider Bearings in Magnetic Hard Disk Drives
TAGAWA, N., & Bogy, D. B. (2002) · Journal of Tribology · doi:10.1115/1.1456084 · Cited by 29
The application guide of mixed programming between MATLAB and other programming languages
Hong, L., & Cai, J. (2010) · International Conference on Computer and Automation Engineering · doi:10.1109/iccae.2010.5452058 · Cited by 25
Gałda, L., Dzierwa, A., Pawlus, P., & Reizer, R. (2010) · Meccanica · doi:10.1007/s11012-010-9300-5 · Cited by 14
Research works printed but not linked: 6
- Salaberry PC, 2010, Vehicle with drag-reducing outer surface
- European Cooperation in the Field of Scientific and Technical Research, 2008, COST Action 532. Scientific final report: Triboscience and tribotechnology. Superior friction and wear control in engines and transmissions
- Anno JN, 1969, J Basic Eng, 91, 726
- Kortikar SN, Stephens LS, Hadinata PC, et al. Manufacturing of microasperities on thrust surfaces using ultraviolet photolithography. In: Proceedings of the ASPE winter topical meeting , Raleigh, NC, USA, 2003, vol.28, pp.148–153.
- McCulloch WS, 1943, Bull Math Biol, 5, 115
- Rosenblatt F, 1961, Principles of neurodynamics
Cited by
Numerical micro-texture optimization for lubricated contacts—A critical discussion
Marian, M., Almqvist, A., Rosenkranz, A., & Fillon, M. (2022) · Friction · doi:10.1007/s40544-022-0609-6 · Cited by 160
Physics-Informed Machine Learning—An Emerging Trend in Tribology
Marian, M., & Tremmel, S. (2023) · Lubricants · doi:10.3390/lubricants11110463 · Cited by 88
Predicting EHL film thickness parameters by machine learning approaches
Marian, M., Mursak, J., Bartz, M., Profito, F. J., Rosenkranz, A., & Wartzack, S. (2023) · Friction · doi:10.1007/s40544-022-0641-6 · Cited by 76
“Otero et al. [66] trained an ANN with 20 neurons in a single hidden layer to predict the coefficient of friction in micro-textured EHL contacts under various operating conditions and dependent on the textures’ dimensions and patterns.”
MethodBhardwaj, V., Pandey, R. K., & Agarwal, V. K. (2016) · Tribology International · doi:10.1016/j.triboint.2016.12.028 · Cited by 59
Zhang, Y., Zhang, X. G., & Matsoukas, G. (2015) · Biosurface and Biotribology · doi:10.1016/j.bsbt.2015.11.003 · Cited by 42
Metadata
- Authors
- de la Guerra Ochoa, E., Otero, J. E., Tanarro, E. C., Morgado, P. L., Lantada, A. D., Munoz-Guijosa, J., & Sanz, J. M.
- Affiliations
- Grupo de Investigación en Ingeniería de Máquinas, Universidad Politécnica de Madrid, Madrid, Spain
- Universidad Politécnica de Madrid (ES)
- Venue
- Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
- Publisher
- SAGE Publications
- Published
- 2013-02-04
- Volume
- 227
- Issue
- 11
- Pages
- 2610-2619
- ISSN
- 0263-7154 (ISSN-L)
- 0954-4062
- 2041-2983
- OpenAlex
- W2149657973
- Cited by
- 25
- References
- 31
- Citations by year
- 2026: 2 · 2025: 1 · 2024: 2 · 2023: 3 · 2022: 4 · 2021: 1 · 2020: 2 · 2019: 1 · 2018: 1 · 2017: 2 · 2016: 3 · 2015: 1 · 2014: 1
- FWCI
- 2.21
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- journals.sagepub.com/page/policies/text-and-data-mining-license (tdm)
- Locations
- Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science (publishedVersion)
- Topics
- Physical Sciences › Engineering › Mechanical Engineering › Tribology and Lubrication Engineering
- Physical Sciences › Engineering › Mechanics of Materials › Adhesion, Friction, and Surface Interactions
- Physical Sciences › Engineering › Mechanical Engineering › Lubricants and Their Additives
- Keywords
- surface texturing, friction coefficient reduction, elastohydrodynamic lubrication, hydrodynamic lubrication, copper surfaces, photolithography, chemical etching, surface roughness, artificial neural networks, friction prediction
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.