The DOI matches its Crossref record.
Multimodal Energy Harvesting System: Piezoelectric and Electromagnetic
Abstract
In this study, we report a multimodal energy harvesting device that combines electromagnetic and piezoelectric energy harvesting mechanism. The device consists of piezoelectric crystals bonded to a cantilever beam. The tip of the cantilever beam has an attached permanent magnet which, oscillates within a stationary coil fixed to the top of the package. The permanent magnet serves two purpose (i) acts as a tip mass for the cantilever beam and lowers the resonance frequency, and (ii) acts as a core which oscillates between the inductive coils resulting in electric current generation through Faraday's effect. Thus, this design combines the energy harvesting from two different mechanisms, piezoelectric and electromagnetic, on the same platform. The prototype system was optimized using the finite element software, ANSYS, to find the resonance frequency and stress distribution. The power generated from the fabricated prototype was found to be 0.25 W using the electromagnetic mechanism and 0.25 mW using the piezoelectric mechanism at 35 g acceleration and 20 Hz frequency.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Safaei, M., Sodano, H. A., & Anton, S. R. (2019) · Smart Materials and Structures · doi:10.1088/1361-665x/ab36e4 · Cited by 874
“A similar design was proposed by Tadesse et al in 2009 [458], in which PZN-PT crystals were attached to a cantilever beam with a tip magnet and a stationary coil (figure 18(d)).”
MethodTan, Y. K., & Panda, S. K. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2102321 · Cited by 418
Energy Harvesting Research: The Road from Single Source to Multisource
Bai, Y., Jantunen, H., & Juuti, J. (2018) · Advanced Materials · doi:10.1002/adma.201707271 · Cited by 295
Yang, T., Zhou, S., Fang, S., Qin, W., & Inman, D. J. (2021) · Applied Physics Reviews · doi:10.1063/5.0051432 · Cited by 259
A novel two-degrees-of-freedom piezoelectric energy harvester
Wu, H., Tang, L., Yang, Y., & Soh, C. K. (2013) · Journal of Intelligent Material Systems and Structures · doi:10.1177/1045389x12457254 · Cited by 253
Metadata
- Authors
- Tadesse, Y., Zhang, S., & Priya, S.
- Venue
- Journal of Intelligent Material Systems and Structures
- Publisher
- SAGE Publications
- Published
- 2008-11-28
- Volume
- 20
- Issue
- 5
- Pages
- 625-632
- ISSN
- 1045-389X (ISSN-L)
- 1530-8138
- OpenAlex
- W2064656766
- Cited by
- 246
- References
- 0
- FWCI
- 11.38
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Multimodal Energy Harvesting System: Piezoelectric and Electromagnetic. https://app.cochat.ai/papers/10.1177/1045389x08099965
- The paper
- Tadesse, Y., Zhang, S., & Priya, S. (2009). Multimodal Energy Harvesting System: Piezoelectric and Electromagnetic. Journal of Intelligent Material Systems and Structures. https://doi.org/10.1177/1045389x08099965
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.