The DOI matches its Crossref record, with a small difference in title or year.
Shape memory alloy-based adaptive-passive dynamic vibration absorber for vibration control in piping applications
Abstract
A dynamic vibration absorber (DVA) can be used as an effective vibration control device. It is essentially a secondary mass, attached to an original system via a spring and damper. The natural frequency of the DVA is tuned such that it coincides with the frequency of unwanted vibration in the original system. This results in absorption of the inertial energy transferred from the primary structure. This work aims at developing an adaptive-passive dynamic vibration absorber with the help of shape memory alloy (SMA) springs in order to attenuate the vibration for a range of excitation frequencies. In this paper, the unique property of SMAs temperature-dependent Young’s modulus has been used to change the stiffness of the spring actively to control the vibration. Experiments were carried out with an SMA-based dynamic vibration absorber to study the effect of reduction in amplitude of vibration of a cantilever structure. A microcontroller-based control system has been developed for timely actuation of SMA and to supply optimum current to the SMA springs connected in parallel. The experimental results show that the SMA-based dynamic vibration absorber is more effective in reducing the amplitude of vibration for a wider frequency range. The developed SMA-based DVA is used to damp out the vibration in piping applications. The effectiveness of adaptive-passive DVA in controlling the vibration for a range of excitation frequencies was proved.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“From the above discussion, it is easy to notice that active control methods, whether based on piezoelectric actuators [108,117,[119][120] , by adjusting the magnetic field [12,122] , or by other methods such as memory alloy materials [52,128] , can effectively control the vibrations of fluidconveying pipes.”
From Vibration control of fluid-conveying pipes: a state-of-the-art review (2023) · cites this paper as [52]
Citations
Cites
No references could be resolved yet.
Research works printed but not linked: 13
- 10.1177/1045389X12461696 · DOI
- 10.1016/0022-460X(90)90760-W · DOI
- 10.1006/jsvi.1994.0370 · DOI
- 10.1177/1045389X9300400213 · DOI
- 10.1177/1077546312437435 · DOI
- 10.1115/1.2930305 · DOI
- 10.1088/0964-1726/14/1/002 · DOI
- 10.4018/ijmmme.2012010105 · DOI
- Tanaka KA, 1986, Res Mechanica, 18, 251
- 10.1006/jsvi.2000.3496 · DOI
- 10.1016/j.jsv.2005.01.018 · DOI
- Yuvaraja M, 2010, National Journal of Technology, 6, 24
- Yuvaraja M and Senthilkumar M (2010b) Vibration control of GFRP composite beam using SMA-FLEXINOL actuators. Annals of Faculty Engineering Hunedoara – International Journal of Engineering Tome 8 Fascicule 3: 288–295.
Cited by
Sorted by citations
Vibration control of fluid-conveying pipes: a state-of-the-art review
Ding, H., & Ji, J. C. (2023) · Applied Mathematics and Mechanics · doi:10.1007/s10483-023-3023-9 · Cited by 132
“Mani and Senthilkumar([52]) developed an adaptive passive DVA with the help of a shape memory alloy spring, and used it to reduce the vibration amplitude of a fluid-conveying cantilever pipe in 2015.”
BackgroundMethodInfluential
Metadata
- Authors
- Mani, Y., & Senthilkumar, M.
- Affiliations
- PSG College of Technology (IN)
- Corresponding author
- Mani, Yuvaraja
- Venue
- Journal of Vibration and Control
- Publisher
- SAGE Publications
- Published
- 2013-07-10
- Volume
- 21
- Issue
- 9
- Pages
- 1838-1847
- ISSN
- 1077-5463 (ISSN-L)
- 1741-2986
- OpenAlex
- W2135136367
- Cited by
- 78
- References
- 0
- Citations by year
- 2026: 8 · 2025: 8 · 2024: 6 · 2023: 8 · 2022: 11 · 2021: 4 · 2020: 7 · 2019: 5 · 2018: 8 · 2017: 8 · 2016: 2 · 2015: 2 · 2014: 1
- FWCI
- 3.62
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Journal of Vibration and Control (publishedVersion)
- Topics
- Physical Sciences › Engineering › Civil and Structural Engineering › Vibration Control and Rheological Fluids
- Physical Sciences › Engineering › Mechanical Engineering › Vibration and Dynamic Analysis
- Physical Sciences › Materials Science › Materials Chemistry › Shape Memory Alloy Transformations
- Keywords
- shape memory alloys, dynamic vibration absorber, pipe vibration, temperature-dependent stiffness, cantilever vibration, microcontroller control
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
