The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Feasibility of using digital image correlation for unmanned aerial vehicle structural health monitoring of bridges
Abstract
Quantifying the condition of aging structures is important to verify structural integrity and long-term reliability. Structural health monitoring plays a key role in the prevention of catastrophic failure, in improving the safety of infrastructure, and in reducing the downtime and costs associated with their maintenance. Bridges are typically designed to have a lifespan on order of 50 years; therefore, bridge monitoring is important since many of them are near to or have already exceeded their design life. Conventional sensors and examination techniques such as accelerometers and strain gages produce results at only a discrete number of points. Visual inspection only provides qualitative information and is subject to human variability and inconsistencies between inspectors. Moreover, both approaches are labor intensive and time-consuming. In recent years, three-dimensional digital image correlation systems have proven their efficiency in being able to provide accurate quantitative information of structural deformations, full-field strain, and geometry profiles of large-scale structures. At the same time, unmanned aerial vehicles have emerged as valuable tools for remotely performing measurements in places, which are either difficult or dangerous to access. With regard to bridge inspection, unmanned aerial vehicles have the capability to expedite the measurement process, offer increased accessibility, and reduce interference with the structures’ functionality. In this study, a novel approach that combines the use of an unmanned aerial vehicle and three-dimensional digital image correlation is developed to perform non-contact, optically based measurements to monitor the health of bridges. Extensive laboratory tests and a long-term monitoring campaign on two in-service concrete bridges demonstrated the accuracy of this system in detecting structural changes. Results show that this system is able to detect changes to the bridge geometry with an uncertainty on the order of 10−5 m while improving accessibility. The feasibility of the approach, best practices, and lessons learned is presented.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Los Alamos National Lab., N. (. S., Doebling, S., USDOE, W., Farrar, C., Prime, M., & Shevitz, D. (1996) · doi:10.2172/249299 · Cited by 2,899 · cited 2×
“The system employs an image-processing algorithm for crack detection, proving to be a viable method for SHM.”
Background
Cited by
A literature review of next-generation smart sensing technology in structural health monitoring
Sony, S., Laventure, S., & Sadhu, A. (2019) · Structural Control and Health Monitoring · doi:10.1002/stc.2321 · Cited by 606
Liu, Y., Nie, X., Fan, J., & Liu, X. (2020) · Computer-Aided Civil and Infrastructure Engineering · doi:10.1111/mice.12501 · Cited by 305
Kong, X., & Hucks, R. G. (2023) · Automation in Construction · doi:10.1016/j.autcon.2023.104928 · Cited by 125
Development of Digital Twin for Intelligent Maintenance of Civil Infrastructure
Mahmoodian, M., Shahrivar, F., Setunge, S., & Mazaheri, S. (2022) · Sustainability · doi:10.3390/su14148664 · Cited by 110
Metadata
- Authors
- Reagan, D., Sabato, A., & Niezrecki, C.
- Venue
- Structural Health Monitoring
- Publisher
- SAGE Publications
- Published
- 2017-10-10
- Volume
- 17
- Issue
- 5
- Pages
- 1056-1072
- ISSN
- 1475-9217 (ISSN-L)
- 1741-3168
- OpenAlex
- W2763532150
- Cited by
- 229
- References
- 1
- FWCI
- 13.13
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Feasibility of using digital image correlation for unmanned aerial vehicle structural health monitoring of bridges. https://app.cochat.ai/papers/10.1177/1475921717735326
- The paper
- Reagan, D., Sabato, A., & Niezrecki, C. (2018). Feasibility of using digital image correlation for unmanned aerial vehicle structural health monitoring of bridges. Structural Health Monitoring. https://doi.org/10.1177/1475921717735326
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.