The DOI matches its Crossref record; 42 of the 42 references it cites were found in a registry or an index.
Lost data reconstruction for structural health monitoring using deep convolutional generative adversarial networks
Abstract
In the application of structural health monitoring, the measured data might be temporarily or permanently lost due to sensor fault or transmission failure. The measured data with a high data loss ratio undermine its ability for modal identifications and structural condition evaluations. To reconstruct the lost data in the field of structural health monitoring, this study proposes a deep convolutional generative adversarial network which includes a generator with encoder–decoder structure and an adversarial discriminator. The proposed generative adversarial network model needs to understand the content of the complete signals, as well as produce realistic hypotheses for the lost signals. Given the data stably measured before the occurrence of data loss, the generator is trained to extract the features maintained in the data set and reconstruct lost signals using the responses of the remaining functional sensors alone. The discriminator feeds back the distinguished results to the generator to improve its reconstruction accuracy. When training the model, the reconstruction loss and the adversarial loss are employed to better handle the low-frequency features and high-frequency features of the signals. The effectiveness and efficiency of the proposed method are validated by two case studies. As the number of training epoch increases, the reconstructed signals learn the features from low-frequency to high-frequency, and the amplitude of the reconstructed signals gradually increases. It can be seen that the final reconstruction signals match well with the real signals in the time domain and frequency domain. To further demonstrate the applicability of the reconstructed signals in data analysis, the reconstructed acceleration data are used to accurately identify the modal parameters in the numerical case, and the vehicle-induced responses are precisely decomposed from the reconstructed strain data in the field case. Finally, the reconstruction capacity is also investigated with the different numbers of the faulted strain gauges.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Lei et al. [79] exploited the DCGAN to learn the features of the pre-loss data to reconstruct the lost data. Then, they distinguished the actual and reconstructed data using discriminators to improve the reconstruction accuracy.”
From Deep Learning for Structural Health Monitoring: Data, Algorithms, Applications, Challenges, and Trends (2023) · cites this paper as [79]
Citations
Cites
Proceedings of IEEE Conference on Computer Vision and Pattern Recognition
(1993) · doi:10.1109/cvpr.1993 · Cited by 17,667
Deep Learning‐Based Crack Damage Detection Using Convolutional Neural Networks
Cha, Y., Choi, W., & Büyüköztürk, O. (2017) · Computer-Aided Civil and Infrastructure Engineering · doi:10.1111/mice.12263 · Cited by 3,295
Cha, Y., Choi, W., Suh, G., Mahmoudkhani, S., & Büyüköztürk, O. (2018) · Computer-Aided Civil and Infrastructure Engineering · doi:10.1111/mice.12334 · Cited by 1,558 · cited 2×
“Cha et al. 25 implemented region-based CNNs to accurately detect and localize concrete cracks and steel corrosion, which have greatly advanced the performance in damage detection.”
BackgroundVibration Based Condition Monitoring: A Review
Carden, E. P., & Fanning, P. (2004) · Structural Health Monitoring · doi:10.1177/1475921704047500 · Cited by 1,543 · cited 1×
“Structural health monitoring (SHM) techniques have been widely applied in bridges by installing structural health monitoring systems (SHMSs) to measure structural responses and evaluate structural conditions.(1,2) The practical application of SHMS consists of various types of sensors, such as accelerometers, strain ga…”
MethodAccelerating Very Deep Convolutional Networks for Classification and Detection
Zhang, X., Zou, J., He, K., & Sun, J. (2016) · IEEE Transactions on Pattern Analysis and Machine Intelligence · doi:10.1109/tpami.2015.2502579 · Cited by 832 · cited 1×
“Figure 4 illustrates four main types of nonlinear activation functions used in the deep learning, that is, leaky rectified linear unit function (LReLU), rectified linear unit function (ReLU), hyperbolic tangent function (Tanh), and sigmoid function (Sigmoid).(39) LReLU and ReLU perform better in alleviating gradient v…”
BackgroundSun, L., Shang, Z., Xia, Y., Bhowmick, S., & Nagarajaiah, S. (2020) · Journal of Structural Engineering · doi:10.1061/(asce)st.1943-541x.0002535 · Cited by 731 · cited 1×
“Using frequency-domain analysis, time–frequency domain analysis, and statistical analysis, structural safety and performance are evaluated from these measured signals.(3) However, in practice, data loss inevitably occurs which seriously affects structural measurements and assessments.”
MethodSelf-citationTang, Z., Chen, Z., Bao, Y., & Li, H. (2019) · Structural Control and Health Monitoring · doi:10.1002/stc.2296 · Cited by 436 · cited 1×
“Tang et al. 24 trained CNNs with time and frequency information of measured signals for data anomaly detection.”
Abdulkarem, M., Samsudin, K., Rokhani, F. Z., & A Rasid, M. F. (2020) · Structural Health Monitoring · doi:10.1177/1475921719854528 · Cited by 424
Atha, D. J., & Jahanshahi, M. R. (2018) · Structural Health Monitoring · doi:10.1177/1475921717737051 · Cited by 372 · cited 1×
“14 In the SHM field, CNNs have been widely employed to address crack detection, 15,16 corrosion detection, 17 vehicle detection, 18 and structural condition evaluation.”
MethodWang, Z., & Cha, Y.-J. (2021) · Structural Health Monitoring · doi:10.1177/1475921720934051 · Cited by 336 · cited 2×
“Cha et al. 25 implemented region-based CNNs to accurately detect and localize concrete cracks and steel corrosion, which have greatly advanced the performance in damage detection.”
Method
Research works printed but not linked: 3
- Khodabandehlou H, 2019, Struct Health Monit, 26, e2308
- Duan YF, 2019, Smart Struct Syst, 23, 507
- Lei J, 2019, Struct Health Monit, 26
Cited by
Deep learning-based structural health monitoring
Cha, Y.-J., Ali, R., Lewis, J., & Büyükӧztürk, O. (2024) · Automation in Construction · doi:10.1016/j.autcon.2024.105328 · Cited by 418
Zhang, J., Huang, M., Wan, N., Deng, Z., He, Z., & Luo, J. (2024) · Measurement · doi:10.1016/j.measurement.2024.114528 · Cited by 160
Jia, J., & Li, Y. (2023) · Sensors · doi:10.3390/s23218824 · Cited by 182
“Specifically, constructing models, collecting data, and detecting damage in the laboratory is called the experimental phase.”
BackgroundTashakori, A., Jiang, Z., Servati, A., Soltanian, S., Narayana, H., Le, K., Nakayama, C., Yang, C.-L., Wang, Z. J., Eng, J. J., et al. (2024) · Nature Machine Intelligence · doi:10.1038/s42256-023-00780-9 · Cited by 137
“These factors, in addition to lack of washing or sanitization methods, lead to limited practical usability and accuracy of these solutions 1,4,42 .”
Sepasdar, R., Karpatne, A., & Shakiba, M. (2022) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2022.115126 · Cited by 137
Metadata
- Authors
- Lei, X., Sun, L., & Xia, Y.
- Affiliations
- Tongji University (CN)
- Corresponding author
- Xia, Ye
- Venue
- Structural Health Monitoring
- Publisher
- SAGE Publications
- Published
- 2020-10-10
- Volume
- 20
- Issue
- 4
- Pages
- 2069-2087
- ISSN
- 1475-9217 (ISSN-L)
- 1741-3168
- OpenAlex
- W3092593798
- Cited by
- 236
- References
- 42
- Citations by year
- 2026: 37 · 2025: 80 · 2024: 43 · 2023: 36 · 2022: 27 · 2021: 13
- FWCI
- 11.10
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- journals.sagepub.com/page/policies/text-and-data-mining-license (tdm)
- Locations
- Structural Health Monitoring (publishedVersion)
- Funders
- China Scholarship Council (201906260157)
- Science and Technology Commission of Shanghai Municipality (19DZ1203004)
- National Natural Science Foundation of China (51878482, 51978508)
- National Key R&D Program of China (2017YFC1500605)
- Topics
- Physical Sciences › Engineering › Civil and Structural Engineering › Structural Health Monitoring Techniques
- Physical Sciences › Physics and Astronomy › Statistical and Nonlinear Physics › Model Reduction and Neural Networks
- Physical Sciences › Engineering › Civil and Structural Engineering › Infrastructure Maintenance and Monitoring
- Keywords
- missing data imputation, convolutional generative adversarial networks, sensor faults, modal parameter identification
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Lost data reconstruction for structural health monitoring using deep convolutional generative adversarial networks. https://app.cochat.ai/papers/10.1177/1475921720959226
- The paper
- Lei, X., Sun, L., & Xia, Y. (2021). Lost data reconstruction for structural health monitoring using deep convolutional generative adversarial networks. Structural Health Monitoring. https://doi.org/10.1177/1475921720959226
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.