The DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.
Moisture and Bio-deterioration Risk of Building Materials and Structures
Open accessAbstract
There are several biological processes causing aging and damage to buildings. This is partly due to natural aging of materials and excessive moisture. The demands on durability, energy balance, and health of houses are continually rising. For mold development, the minimum (critical) ambient humidity requirement is shown to be between RH 80% and 95% depending on other factors like ambient temperature, exposure time, and the type and surface conditions of building materials. For decay development, the critical humidity is above RH 95%. Mold typically affects the quality of the adjacent air space with volatile compounds and spores. The next stage of moisture-induced damage, the decay development, forms a serious risk for structural strength depending on moisture content, materials, temperature, and time. The worst decay damage cases in North Europe are found in the floors and lower parts of walls, where water accumulates due to different reasons. Modeling of mold growth and decay development based on humidity, temperature, exposure time, and material will give new tools for the evaluation of durability of different building materials and structures. The models make it possible to evaluate the risk and development of mold growth and to analyze the critical conditions needed for the start of biological growth. The model is also a tool to simulate the progress of mold and decay development under different conditions on the structure surfaces. This requires that the moisture capacity and moisture transport properties in the material and at the surface layer be taken into account in the simulations. In practice there are even more parameters affecting mold growth, e.g., thickness of the material layers combined with the local surface heat and mass transfer coefficients. Therefore, the outcome of the simulations and in situ observations of biological deterioration may not agree. In the present article, results on mold growth in different materials and wall assemblies will be shown and existing models on the risk of mold growth development will be evaluated. One of the results of a newly finished large Finnish research project ‘modeling of mold growth’ is an improved and extended mathematical model for mold growth. This model and more detailed research results will be published in other papers.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Uppala, S. M., KÅllberg, P. W., Simmons, A. J., Andrae, U., Bechtold, V. D. C., Fiorino, M., Gibson, J. K., Haseler, J., Hernandez, A., Kelly, G. A., et al. (2005) · Quarterly Journal of the Royal Meteorological Society · doi:10.1256/qj.04.176 · Cited by 6,804
A mathematical model of mould growth on wooden material
Hukka, A., & Viitanen, H. A. (1999) · Wood Science and Technology · doi:10.1007/s002260050131 · Cited by 444
Self-citationThe effects of moisture and temperature on growth and spore germination in some fungi
Ayerst, G. (1969) · Journal of Stored Products Research · doi:10.1016/0022-474x(69)90055-1 · Cited by 375
The moisture requirements of moulds isolated from domestic dwellings
Grant, C., Hunter, C., Flannigan, B., & Bravery, A. F. (1989) · International Biodeterioration · doi:10.1016/0265-3036(89)90002-x · Cited by 279
Fungi and actinobacteria in moisture-damaged building materials — concentrations and diversity
Hyvärinen, A., Meklin, T., Vepsäläinen, A., & Nevalainen, A. (2002) · International Biodeterioration & Biodegradation · doi:10.1016/s0964-8305(01)00103-2 · Cited by 237
Brown rot decay in wooden constructions. Effect of temperature, humidity and moisture
Viitanen, H. A., & Ritschkoff, A. (1991) · Cited by 55
Self-citation
Cited by
Salvaging building materials in a circular economy: a BIM-based whole-life performance estimator
Akanbi, L. A., Oyedele, L. O., Akinade, O. O., Ajayi, A. O., Davila Delgado, M., Bilal, M., & Bello, S. A. (2018) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2017.10.026 · Cited by 468
Metadata
- Authors
- Viitanen, H., Vinha, J., Salminen, K., Ojanen, T., Peuhkuri, R., Paajanen, L., & Lähdesmäki, K.
- Venue
- Journal of Building Physics
- Publisher
- SAGE Publications
- Published
- 2009-08-21
- Volume
- 33
- Issue
- 3
- Pages
- 201-224
- ISSN
- 1097-1963 (ISSN-L)
- 1744-2591
- 1744-2583
- OpenAlex
- W2062837634
- Cited by
- 356
- References
- 6
- FWCI
- 12.36
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Moisture and Bio-deterioration Risk of Building Materials and Structures. https://app.cochat.ai/papers/10.1177/1744259109343511
- The paper
- Viitanen, H., Vinha, J., Salminen, K., Ojanen, T., Peuhkuri, R., Paajanen, L., & Lähdesmäki, K. (2010). Moisture and Bio-deterioration Risk of Building Materials and Structures. Journal of Building Physics. https://doi.org/10.1177/1744259109343511
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.