The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Thermal properties of high-volume fly ash mortars and concretes
Abstract
As sustainability moves to the forefront of construction, the utilization of high-volume fly ash concrete mixtures to reduce CO 2 emissions and cement consumption per unit volume of concrete placed is receiving renewed interest. Concrete mixtures in which the fly ash replaces 50% or more of the Portland cement are both economically and technically viable. This article focuses on a characterization of the thermal properties, namely, specific heat capacity and thermal conductivity, of such mixtures. Both the raw materials and the finished products (mortars and concretes) are evaluated using a transient plane source method. Because the specimens being examined are well hydrated, estimates of the specific heat capacity based on a law of mixtures, with a ‘bound water’ specific heat capacity value being employed for the water in the mixture, provide reasonable predictions of the measured performance. As with most materials, thermal conductivity is found to be a function of density, while also being dependent on whether the aggregate source is siliceous or limestone. The measured values should provide a useful database for evaluating the thermal performance of high-volume fly ash concrete structures.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Gustafsson, S. E. (1991) · Review of Scientific Instruments · doi:10.1063/1.1142087 · Cited by 1,480
Cited by
Geopolymer foam concrete: An emerging material for sustainable construction
Zhang, Z., Provis, J. L., Reid, A., & Wang, H. (2014) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2014.01.081 · Cited by 879
Thermal conductivity of concrete – A review
Asadi, I., Shafigh, P., Abu Hassan, Z. F. B., & Mahyuddin, N. B. (2018) · Journal of Building Engineering · doi:10.1016/j.jobe.2018.07.002 · Cited by 803
A brief on high-volume Class F fly ash as cement replacement – A guide for Civil Engineer
Rashad, A. M. (2015) · International Journal of Sustainable Built Environment · doi:10.1016/j.ijsbe.2015.10.002 · Cited by 291
Moisture transfer and thermal properties of hemp–lime concretes
Walker, R., & Pavía, S. (2014) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2014.04.081 · Cited by 286
Metadata
- Authors
- Bentz, D., Peltz, M., Durán-Herrera, A., Valdez, P., & Juárez, C.
- Venue
- Journal of Building Physics
- Publisher
- SAGE Publications
- Published
- 2010-07-05
- Volume
- 34
- Issue
- 3
- Pages
- 263-275
- ISSN
- 1097-1963 (ISSN-L)
- 1744-2591
- 1744-2583
- OpenAlex
- W2112813863
- Cited by
- 190
- References
- 1
- FWCI
- 21.37
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Thermal properties of high-volume fly ash mortars and concretes. https://app.cochat.ai/papers/10.1177/1744259110376613
- The paper
- Bentz, D., Peltz, M., Durán-Herrera, A., Valdez, P., & Juárez, C. (2011). Thermal properties of high-volume fly ash mortars and concretes. Journal of Building Physics. https://doi.org/10.1177/1744259110376613
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.