The DOI matches its Crossref record.
An Overview of Starch-Based Plastic Blends from Reactive Extrusion
Open accessAbstract
The North American market for biodegradable plastics in 2005 was estimated to be around 60 million pounds (27 kt). Starch-based polymer blends were expected to account for 30 million pounds (14 kt) with significantly lower growth rates than other biodegradable polymers such as polyesters. The main hurdle in the growth of starch-based products is the thermodynamic immiscibility and non-wetting of starch with other polymers which leads to serious deterioration of mechanical properties at >25–30 wt% starch. Higher amounts of starch in the blends entail adding suitable functional groups on starch and other polymers in the blend to make them more compatible. The primary challenge is to develop fast reaction chemistries that can be transformed into viable processes and integrated into existing process lines with economically viable formulations. This article briefly reviews some of the most promising chemistries available for the reactive extrusion of starch-based polymer blends (biodegradable/non-biodegradable).
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Gurunathan, T., Mohanty, S., & Nayak, S. K. (2015) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2015.06.007 · Cited by 1,362
Progress of Polymers from Renewable Resources: Furans, Vegetable Oils, and Polysaccharides
Gandini, A., Lacerda, T. M., Carvalho, A. J. F., & Trovatti, E. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00264 · Cited by 756
Morphology and properties of compatibilized polylactide/thermoplastic starch blends
Huneault, M. A., & Li, H. (2007) · Polymer · doi:10.1016/j.polymer.2006.11.023 · Cited by 506
Thermoplastic starches: Properties, challenges, and prospects
Mohammadi Nafchi, A., Moradpour, M., Saeidi, M., & Alias, A. K. (2013) · Starch - Stärke · doi:10.1002/star.201200201 · Cited by 433
Xie, F., Halley, P. J., & Avérous, L. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2011.07.002 · Cited by 301
Metadata
- Authors
- Kalambur, S., & Rizvi, S. S. H.
- Venue
- Journal of Plastic Film & Sheeting
- Publisher
- SAGE Publications
- Published
- 2006-01
- Volume
- 22
- Issue
- 1
- Pages
- 39-58
- ISSN
- 1530-8014 (ISSN-L)
- 8756-0879
- OpenAlex
- W2162046438
- Cited by
- 158
- References
- 0
- FWCI
- 1.57
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: An Overview of Starch-Based Plastic Blends from Reactive Extrusion. https://app.cochat.ai/papers/10.1177/8756087906062729
- The paper
- Kalambur, S., & Rizvi, S. S. H. (2006). An Overview of Starch-Based Plastic Blends from Reactive Extrusion. Journal of Plastic Film & Sheeting. https://doi.org/10.1177/8756087906062729
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.