The DOI matches its Crossref record.
Joint formation in dissimilar Al alloy/steel and Mg alloy/steel friction stir spot welds
Abstract
The microstructural features and overlap shear strength properties of friction stir spot welds made between Al 6111 and low carbon steel, and between Mg alloy AM60 and DP600 dual phase steel, are investigated. When Al 6111 is the upper sheet in the dissimilar sandwich, completed spot welds show evidence of intermetallic layer formation and cracking. Increasing tool pin penetration into the lower sheet provided increased mechanical interlocking of the sheets due to clinching. However, increasing penetration also promoted intermetallic formation and cracking in completed welds. However, dissimilar AM60/DP600 steel friction stir spot welds produced with AM60 as the upper sheet in the dissimilar sandwich do not show evidence of intermetallic formation and cracking may be avoided by removing the zinc coating on the DP600 steel before the friction stir spot welding operation.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Review: Friction stir welding tools
Rai, R., De, A., Bhadeshia, H. K. D. H., & DebRoy, T. (2011) · Science and Technology of Welding and Joining · doi:10.1179/1362171811y.0000000023 · Cited by 808
Friction stir welding: Process, automation, and control
Gibson, B. T., Lammlein, D. H., Prater, T. J., Longhurst, W. R., Cox, C. D., Ballun, M. C., Dharmaraj, K. J., Cook, G. E., & Strauss, A. M. (2014) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2013.04.002 · Cited by 509
Friction stir welding of dissimilar alloys – a perspective
DebRoy, T., & Bhadeshia, H. K. D. H. (2010) · Science and Technology of Welding and Joining · doi:10.1179/174329310x12726496072400 · Cited by 287
Ultrasonic welding of magnesium alloys: a review
Rubino, F., Parmar, H., Esperto, V., & Carlone, P. (2020) · Materials and Manufacturing Processes · doi:10.1080/10426914.2020.1758330 · Cited by 66
Characteristics of Intermetallic Compounds in Dissimilar Friction Stir Welding: A Review
Esmaeili, A., Sbarufatti, C., & Hamouda, A. M. S. (2019) · Metallography, Microstructure, and Analysis · doi:10.1007/s13632-019-00557-w · Cited by 17
Metadata
- Authors
- Liyanage, T., Kilbourne, J., Gerlich, A. P., & North, T. H.
- Venue
- Science and Technology of Welding and Joining
- Publisher
- SAGE Publications
- Published
- 2009-08
- Volume
- 14
- Issue
- 6
- Pages
- 500-508
- ISSN
- 1362-1718 (ISSN-L)
- 1743-2936
- OpenAlex
- W2113070864
- Cited by
- 184
- References
- 0
- FWCI
- 19.30
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Joint formation in dissimilar Al alloy/steel and Mg alloy/steel friction stir spot welds. https://app.cochat.ai/papers/10.1179/136217109x456960
- The paper
- Liyanage, T., Kilbourne, J., Gerlich, A. P., & North, T. H. (2009). Joint formation in dissimilar Al alloy/steel and Mg alloy/steel friction stir spot welds. Science and Technology of Welding and Joining. https://doi.org/10.1179/136217109x456960
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.