The DOI matches its Crossref record; 8 of the 8 references it cites were found in a registry or an index.
Processing and properties of monolithic TiB2based materials
Abstract
Titanium diboride (TiB2) based materials have received wide attention because of their high hardness and elastic modulus, good abrasion resistance, and superior thermal and electrical conductivity. Potential applications include high temperature structural materials, cutting tools, armour, electrodes in metal smelting and wear parts. Despite its useful properties, the application of monolithic TiB2 is limited by poor sinterability, exaggerated grain growth at high temperature and poor oxidation resistance above 1000°C. Pure TiB2 can be densified only at high temperatures (∼2000°C), with an applied pressure generally being necessary during sintering. However, these high sintering temperatures cause abnormal grain growth and microcracks, which are detrimental to the mechanical properties. Various sinter additives are commonly added to obtain dense TiB2 with optimised mechanical properties at lower sintering temperature. The present review surveys the current state of knowledge on development of bulk TiB2 based materials, with particular emphasis on consolidation microstructure property relationships. Three major issues are addressed: the preparation of bulk titanium boride with metallic and non-metallic sinter additives (up to 20 wt-%), tribological properties and thermal stability of the borides. In conclusion, a perspective for future development of boride materials is provided.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Material properties of titanium diboride
Munro, R. G. (2000) · Journal of Research of the National Institute of Standards and Technology · doi:10.6028/jres.105.057 · Cited by 948
Physical ceramics: principles for ceramic science and engineering
(1996) · Choice Reviews Online · doi:10.5860/choice.34-1566 · Cited by 721
Ti(C,N) cermets — Metallurgy and properties
Ettmayer, P., Kolaska, H., Lengauer, W., & Dreyer, K. (1995) · International Journal of Refractory Metals and Hard Materials · doi:10.1016/0263-4368(95)00027-g · Cited by 596
Handbook of tribology: materials, coatings, and surface treatments
(1992) · Choice Reviews Online · doi:10.5860/choice.29-3326 · Cited by 531
Mechanical behaviour and oxidation resistance of structural silicides
Mitra, R. (2006) · International Materials Reviews · doi:10.1179/174328006x79454 · Cited by 279
Wang, W., Fu, Z., Wang, H., & Yuan, R. (2002) · Journal of the European Ceramic Society · doi:10.1016/s0955-2219(01)00424-1 · Cited by 263
Evaluation of magnetron-sputtered TiB2 intended for tribological applications
Berger, M., Larsson, M. R., & Hogmark, S. (2000) · Surface and Coatings Technology · doi:10.1016/s0257-8972(99)00638-6 · Cited by 124
Telle, R. (2006) · Materials Science and Technology · doi:10.1002/9783527603978.mst0120 · Cited by 36
Cited by
Support materials for PEMFC and DMFC electrocatalysts—A review
Sharma, S., & Pollet, B. G. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.02.011 · Cited by 1,206
Noncarbon Support Materials for Polymer Electrolyte Membrane Fuel Cell Electrocatalysts
Wang, Y.-J., Wilkinson, D. P., & Zhang, J. (2011) · Chemical Reviews · doi:10.1021/cr100060r · Cited by 801
Advances in ultra-high temperature ceramics, composites, and coatings
Ni, D., Cheng, Y., Zhang, J., Liu, J.-X., Zou, J., Chen, B., Wu, H., Li, H., Dong, S., Han, J., et al. (2022) · Journal of Advanced Ceramics · doi:10.1007/s40145-021-0550-6 · Cited by 789
Metadata
- Authors
- Basu, B., Raju, G. B., & Suri, A. K.
- Venue
- International Materials Reviews
- Publisher
- SAGE Publications
- Published
- 2006-12
- Volume
- 51
- Issue
- 6
- Pages
- 352-374
- ISSN
- 0950-6608 (ISSN-L)
- 1743-2804
- OpenAlex
- W2028058342
- Cited by
- 483
- References
- 8
- FWCI
- 12.97
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Processing and properties of monolithic TiB2based materials. https://app.cochat.ai/papers/10.1179/174328006x102529
- The paper
- Basu, B., Raju, G. B., & Suri, A. K. (2006). Processing and properties of monolithic TiB2based materials. International Materials Reviews. https://doi.org/10.1179/174328006x102529
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.