The DOI matches its Crossref record.
Process optimisation of selective laser melting using energy density model for nickel based superalloys
Open accessAbstract
The main challenge associated with the application of selective laser melting (SLM) to Ni based superalloys is the performance of process optimisation to maximise the mechanical properties. The energy density parameter has typically been used as a semiquantitative approach to identify the energy threshold beyond which the material achieves virtually full consolidation. Nonetheless, some Ni superalloys are susceptible to crack formation during SLM, which cannot be avoided via process optimisation. In the present report, a comparative study is presented showing the utility of the energy density parameter in process optimisation for γ′ and γ′/γ″ strengthened Ni based superalloys. For both classes, it was found that the build density increases [i.e. void area () decreases] with the increase in the energy density. Nonetheless, no direct correlation can be found between the energy density parameter and the cracking density.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Additive manufacturing of metallic components – Process, structure and properties
DebRoy, T., Wei, H. L., Zuback, J. S., Mukherjee, T., Elmer, J. W., Milewski, J. O., Beese, A. M., Wilson-Heid, A., De, A., & Zhang, W. (2018) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.10.001 · Cited by 8,805
Defect formation mechanisms in selective laser melting: a review
Zhang, B., Li, Y., & Bai, Q. (2017) · Chinese Journal of Mechanical Engineering · doi:10.1007/s10033-017-0121-5 · Cited by 924
Fayazfar, H., Salarian, M., Rogalsky, A., Sarker, D., Russo, P., Paserin, V., & Toyserkani, E. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.02.018 · Cited by 665
Mostafaei, A., Ghiaasiaan, R., Ho, I.-T., Strayer, S., Chang, K.-C., Shamsaei, N., Shao, S., Paul, S., Yeh, A.-C., Tin, S., et al. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2023.101108 · Cited by 531
Is the energy density a reliable parameter for materials synthesis by selective laser melting?
Prashanth, K. G., Scudino, S., Maity, T., Das, J., & Eckert, J. (2017) · Materials Research Letters · doi:10.1080/21663831.2017.1299808 · Cited by 418
Metadata
- Authors
- Carter, L. N., Wang, X., Read, N., Khan, R., Aristizabal, M., Essa, K., & Attallah, M. M.
- Venue
- Materials Science and Technology
- Publisher
- SAGE Publications
- Published
- 2016-05
- Volume
- 32
- Issue
- 7
- Pages
- 657-661
- ISSN
- 0267-0836 (ISSN-L)
- 1743-2847
- OpenAlex
- W1562884643
- Cited by
- 221
- References
- 0
- FWCI
- 10.46
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Process optimisation of selective laser melting using energy density model for nickel based superalloys. https://app.cochat.ai/papers/10.1179/1743284715y.0000000108
- The paper
- Carter, L. N., Wang, X., Read, N., Khan, R., Aristizabal, M., Essa, K., & Attallah, M. M. (2016). Process optimisation of selective laser melting using energy density model for nickel based superalloys. Materials Science and Technology. https://doi.org/10.1179/1743284715y.0000000108
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.